Keeping Pops mint?
Forum rules
This section is for general Pop discussion, not showing off your recent acquisitions. Please use the Dance Hall for collection addition pictures.
Please post Funko subscription box and item discussions in the Powered By Funko section.
This section is for general Pop discussion, not showing off your recent acquisitions. Please use the Dance Hall for collection addition pictures.
Please post Funko subscription box and item discussions in the Powered By Funko section.
-
CashMeOusside
- Posts: 86
- Joined: Mon Dec 11, 2017 2:08 pm
Keeping Pops mint?
I know what the difference is between a mint and average condition box but what makes the figure itself less "mint"? I'm an OOB collector myself and some more rare Pops like Dr. Harleen are standing on my shelf without any form of protection whatsoever but I don't see how the figure can get less mint. Dust won't affect it right? And I guess canned air does the trick when eventually dust would heap up.
- ethaneee22
- Posts: 139
- Joined: Sat May 16, 2015 10:14 pm
- Location: Florida
- Contact:
Re: Keeping Pops mint?
The only damage that can be done in my opinion is from sunlight or just being out in the open for a very very long time.
But with cleanings every other month, they should be just fine.
But with cleanings every other month, they should be just fine.

- TJLAUTERBACH
- Posts: 2968
- Joined: Sat Feb 10, 2018 8:43 pm
- Location: Baltimore
Re: Keeping Pops mint?
I put every pop in a pop protector and out of the sun. Feather duster the pop protectors from time to time.

- Jezter
- Collector of the Month

- Posts: 5281
- Joined: Sat Jul 12, 2014 10:53 am
- Location: West Chester, PA
Re: Keeping Pops mint?
I would assume the only major damage that can be done to an OOB pop would be direct sunlight, or a room/attic/basement that is subject to extreme temp changes, like during the summer or winter. Otherwise I'd say just to dust them every couple of months and they would be fine. I'm sure some of the people who have been collecting these or items like these for 10 plus years could give a better account of how they last, I've only been collecting pops for a little over 4 years, and no issues yet from just standing on the shelves OOB.
Hey I'm John! 
Pops!- 860ish
Dorbz: 35
Mystery Minis: 34
Sodas: 7
Vinyl Idolz: 2
Hikari: 1
Mini-Hikari: 1
Instagram: courtjezter
This Is Where A Really Neat Signature Is Going To Go....Eventually...Maybe.
Pops!- 860ish
Dorbz: 35
Mystery Minis: 34
Sodas: 7
Vinyl Idolz: 2
Hikari: 1
Mini-Hikari: 1
Instagram: courtjezter
This Is Where A Really Neat Signature Is Going To Go....Eventually...Maybe.
- Valde
- HOF 2022 & CotM

- Posts: 5379
- Joined: Wed Apr 23, 2014 4:43 pm
- Location: Las Vegas
- Contact:
Re: Keeping Pops mint?
Paint defects are about the biggest thing that makes me a Pop! not mint. It kind of sucks to see paint flaws on the face or even on the bottom of the head where the neck connects.
Grail: Super Freddy
Jason - va1de on Instagram



Jason - va1de on Instagram



-
Jaybrd1095
- Posts: 536
- Joined: Wed May 09, 2018 3:07 pm
Re: Keeping Pops mint?
Defects add character, I collect for the nostalgia. Would not matter to me one bit if I got a hold of Tupac with a paint defect or not.
- datfunkojawn
- Posts: 384
- Joined: Mon Jul 25, 2016 11:35 pm
- Location: Philadelphia, PA
- Contact:
Re: Keeping Pops mint?
Away from direct sunlight is a +. Other than that fornthe box it best to minimize the amounts of time you take it in and out of the protector. Each time as careful as you may think you are it may cause tiny damages. I also clean my hands before touching. Sometimes your fingers have grease or oils on it.
Collecting since March '16 - Philadelphia, PA - My Motto: "Buy it NOW, Regret it LATER"
IG: datfunkojawn



IG: datfunkojawn



- Strending625
- Collector of the Month

- Posts: 2858
- Joined: Sun Dec 06, 2015 9:42 am
- Location: Echo Base, Hoth
- Contact:
Re: Keeping Pops mint?
For OOB pops just use a swiffer duster or canned air to dust them. Try not to knock them off of the shelves. Pops with small, thin accessories can break easily when dropped. If you are storing them OOB in a box or plastic tub, try and keep something between layers so the paint doesn’t scuff. I have a lot of OOB pops in some big boxes but put layers of bubble wrap between so the paint didn’t scuff on them.
Brandon
Duty today for a funner tomorrow
Pops: More than my wife needs to know about
Duty today for a funner tomorrow
Pops: More than my wife needs to know about
- SteakNEggs310
- Posts: 170
- Joined: Sun Jul 09, 2017 4:11 am
Re: Keeping Pops mint?
I wonder if the cardboard will last like baseball cards do if protected. I've always been curious about that. How would that cardboard box look at let's say 40 or 60 years??? I guess only time will tell

- MamboPop
- Posts: 9
- Joined: Sat Aug 18, 2018 6:04 pm
Re: Keeping Pops mint?
What's the best way to remove dust stains especially on the face area?
Wet wipes? Wet cotton?
Wet wipes? Wet cotton?
IG: MamboPop


-
CashMeOusside
- Posts: 86
- Joined: Mon Dec 11, 2017 2:08 pm
Re: Keeping Pops mint?
With direct sunlight you mean like litterally placing them by the window or something right?
- Sarcasticguy
- Hall of Fame Class of 2023

- Posts: 4535
- Joined: Tue Aug 11, 2015 6:07 pm
- Location: Phoenix, Arizona
- Contact:
Re: Keeping Pops mint?
Valde wrote:Paint defects are about the biggest thing that makes me a Pop! not mint. It kind of sucks to see paint flaws on the face or even on the bottom of the head where the neck connects.
Because these flaws come from the factory.. wouldn't these be apart of the "minting" process?

Now, with a non-devil's advocate opinion, I would say a non-mint OOB figure would be from damage, fading or scuffing.. some of which happens at the factory, unfortunately.
Hi, I'm Scott.
Instagram: @Sarcasticguy89

ISO:
Any Fallout Protos
Aliens Ellen Ripley Rock Candy Proto
Furiosa and Normal Immortan Joe Protos
SDCC '13 Bloody Predator Pop!
Retro Freddy Thor | Retro Freddy Skeletor
Instagram: @Sarcasticguy89

ISO:
Any Fallout Protos
Aliens Ellen Ripley Rock Candy Proto
Furiosa and Normal Immortan Joe Protos
SDCC '13 Bloody Predator Pop!
Retro Freddy Thor | Retro Freddy Skeletor
- cptuff1969
- Posts: 728
- Joined: Thu Mar 08, 2018 2:32 pm
- Location: Henderson Nevada
- Contact:
- [llO_oll]7
- Posts: 781
- Joined: Fri Aug 11, 2017 8:20 pm
- Location: Orange County, California
Re: Keeping Pops mint?
well for my oob collection they do sometime fall off the shelf getting scratches or dents on them. If you have the space for them, taking them out of the original box and keeping them in the insert with a clear protector is always a cool idea too.
Kevin @[llO_oll]7




- bspears82
- Posts: 1142
- Joined: Tue Jul 09, 2013 8:46 pm
Re: Keeping Pops mint?
I keep all the boxes in protectors and I go OOB. I place all of them in ball bat cases.


- TenTwoSix
- Posts: 1312
- Joined: Mon Aug 27, 2012 3:47 am
Re: Keeping Pops mint?
Sometimes pops fall when OOB and get damaged. Happened to me before 
Hi, I'm Jerry!


- Thrillofthehunt
- Posts: 1207
- Joined: Mon Apr 18, 2016 10:21 am
- Location: Phoenix, AZ
Re: Keeping Pops mint?
I put all of my pops in a protector. as an old school comic collector, always putting everything in bags and boards, it's just my mentality
There are plenty of websites, and places on ebay where you can buy the protectors in bulk. for roughly .50c to $1 per pop, why not just protect it from any accidental scuffs or creases? To me, it's worth it for the incremental cost seeing as how I already paid to buy the pop.


- Nemesis989
- Posts: 2892
- Joined: Thu May 04, 2017 5:51 pm
- Location: Alberta, Canada
Re: Keeping Pops mint?
SteakNEggs310 wrote:I wonder if the cardboard will last like baseball cards do if protected. I've always been curious about that. How would that cardboard box look at let's say 40 or 60 years??? I guess only time will tell
I assume they will look much the same as they do now, only yellower. I also bet that in 40 to 60 years a bunch of stickers will be flaking or straight up falling off. But maybe it depends on how you keep them......
Thank you everyone for this awesome community
- r2d2
- Posts: 881
- Joined: Sun May 25, 2014 12:08 pm
- Location: Mexico City
- Contact:
Re: Keeping Pops mint?
Sarcasticguy wrote:Valde wrote:Paint defects are about the biggest thing that makes me a Pop! not mint. It kind of sucks to see paint flaws on the face or even on the bottom of the head where the neck connects.
Because these flaws come from the factory.. wouldn't these be apart of the "minting" process?
Now, with a non-devil's advocate opinion, I would say a non-mint OOB figure would be from damage, fading or scuffing.. some of which happens at the factory, unfortunately.
For me, it wouldn't matter in which stage of the Pop life the defect came in. It wouldn't be mint
- FearlessPhotog
- Posts: 1048
- Joined: Thu Aug 11, 2016 12:02 pm
Re: Keeping Pops mint?
Damage, no matter when it happened, would mean the piece is not mint. Now, paint errors or crappy glue job wouldn't necessary make a piece not mint.
- r2d2
- Posts: 881
- Joined: Sun May 25, 2014 12:08 pm
- Location: Mexico City
- Contact:
Re: Keeping Pops mint?
FearlessPhotog wrote:Damage, no matter when it happened, would mean the piece is not mint. Now, paint errors or crappy glue job wouldn't necessary make a piece not mint.
Why not? If you could choose between a figure with paint errors or crappy glue job and one without it, which one would you choose?
- KidMarvel
- Rookie Of The year

- Posts: 4146
- Joined: Sun Mar 11, 2018 5:49 am
- Location: Singapore
- Contact:
Re: Keeping Pops mint?
Chips on the figure, fading paint due to sunlight, dust ea
setting into the material. Think those are the immediate ones I can think off!
setting into the material. Think those are the immediate ones I can think off!
Name: Randall
Collector of Pops, Dorbz, Minis, PSH, Hikaris and Vynl
IG: www.instagram.com/funkoforeveryone/
"A story behind every figure"
There's always room for more Disney Magic and Marvel Adventure





Collector of Pops, Dorbz, Minis, PSH, Hikaris and Vynl
IG: www.instagram.com/funkoforeveryone/
"A story behind every figure"
There's always room for more Disney Magic and Marvel Adventure





- FearlessPhotog
- Posts: 1048
- Joined: Thu Aug 11, 2016 12:02 pm
Re: Keeping Pops mint?
r2d2 wrote:FearlessPhotog wrote:Damage, no matter when it happened, would mean the piece is not mint. Now, paint errors or crappy glue job wouldn't necessary make a piece not mint.
Why not? If you could choose between a figure with paint errors or crappy glue job and one without it, which one would you choose?
because mint condition refers to damage on the pop or box. a bad paint job doesnt mean the pop is not mint, unless an external force cause the paint to be bad (like sun exposure). but thats just my opinion!
- andibgoode
- Posts: 104
- Joined: Mon Jul 30, 2018 6:08 am
- Location: South Australia
- Contact:
Re: Keeping Pops mint?
FearlessPhotog wrote:r2d2 wrote:FearlessPhotog wrote:Damage, no matter when it happened, would mean the piece is not mint. Now, paint errors or crappy glue job wouldn't necessary make a piece not mint.
Why not? If you could choose between a figure with paint errors or crappy glue job and one without it, which one would you choose?
because mint condition refers to damage on the pop or box. a bad paint job doesnt mean the pop is not mint, unless an external force cause the paint to be bad (like sun exposure). but thats just my opinion!
I’d agree with you! To me not mint = damage done after manufacturing etc. (for any item). Especially considering how common paint errors & the like are!
- FearlessPhotog
- Posts: 1048
- Joined: Thu Aug 11, 2016 12:02 pm
Re: Keeping Pops mint?
andibgoode wrote:FearlessPhotog wrote:r2d2 wrote:
Why not? If you could choose between a figure with paint errors or crappy glue job and one without it, which one would you choose?
because mint condition refers to damage on the pop or box. a bad paint job doesnt mean the pop is not mint, unless an external force cause the paint to be bad (like sun exposure). but thats just my opinion!
I’d agree with you! To me not mint = damage done after manufacturing etc. (for any item). Especially considering how common paint errors & the like are!
exactly! if paint errors made something not mint, then i have news for funko collectors hahah....
-
T-Diamond Stylus
- Posts: 267
- Joined: Fri Oct 30, 2015 1:48 am
- Location: NJ
Re: Keeping Pops mint?
I'm OOB, mine fall and get scuffed. I just use a swiffer to clean from time to time. I'm not in collecting for money later on.

- Strending625
- Collector of the Month

- Posts: 2858
- Joined: Sun Dec 06, 2015 9:42 am
- Location: Echo Base, Hoth
- Contact:
Re: Keeping Pops mint?
If you are storing them together OOB just try to keep them from rubbing together otherwise you can get scuffs and paint transfer from other pops.
Brandon
Duty today for a funner tomorrow
Pops: More than my wife needs to know about
Duty today for a funner tomorrow
Pops: More than my wife needs to know about
- Boymom4
- Posts: 3339
- Joined: Sun Jul 30, 2017 8:15 pm
Re: Keeping Pops mint?
andibgoode wrote:FearlessPhotog wrote:r2d2 wrote:
Why not? If you could choose between a figure with paint errors or crappy glue job and one without it, which one would you choose?
because mint condition refers to damage on the pop or box. a bad paint job doesnt mean the pop is not mint, unless an external force cause the paint to be bad (like sun exposure). but thats just my opinion!
I’d agree with you! To me not mint = damage done after manufacturing etc. (for any item). Especially considering how common paint errors & the like are!
Yes, I also agree with this. There are lots of pops that have bad paint jobs, etc (especially some of the older pops) and have never been removed from a perfect mint box, however the pop itself came directly from the manufacturing process like that. So I also feel like a pop being not mint means damage happened after manufacturing etc
- KidMarvel
- Rookie Of The year

- Posts: 4146
- Joined: Sun Mar 11, 2018 5:49 am
- Location: Singapore
- Contact:
Re: Keeping Pops mint?
Strending625 wrote:If you are storing them together OOB just try to keep them from rubbing together otherwise you can get scuffs and paint transfer from other pops.
Found out the hard way after a couple of mine fell like dominos and i had a chain of paint scuffs
Name: Randall
Collector of Pops, Dorbz, Minis, PSH, Hikaris and Vynl
IG: www.instagram.com/funkoforeveryone/
"A story behind every figure"
There's always room for more Disney Magic and Marvel Adventure





Collector of Pops, Dorbz, Minis, PSH, Hikaris and Vynl
IG: www.instagram.com/funkoforeveryone/
"A story behind every figure"
There's always room for more Disney Magic and Marvel Adventure





- zaghawk
- HoF 2020 & CotM

- Posts: 2025
- Joined: Fri Nov 07, 2014 1:43 am
- Location: Bellevue, Wa
- Contact:
Re: Keeping Pops mint?
Can I just say the second the word “mint” is used by a pop collector I pretty much run the other direction.
Gavin

FunKlub # 14297

FunKlub # 14297
- Battastic
- Collector of the Month

- Posts: 3751
- Joined: Mon Feb 11, 2013 1:59 pm
- Location: Piedmont, SC
Re: Keeping Pops mint?
I once put a mint near my POPs, the box started changing colors and I freaked out. Never again, no matter how much the internet says POPs should have mints.
"If you can't have fun, if you can't laugh, if you can't enjoy it...it's not worth it." - Joey
-
Jortega321
- Posts: 716
- Joined: Thu Jun 15, 2017 2:31 am
- Location: Jersey City, NJ
- Contact:
Re: Keeping Pops mint?
CashMeOusside wrote:I know what the difference is between a mint and average condition box but what makes the figure itself less "mint"? I'm an OOB collector myself and some more rare Pops like Dr. Harleen are standing on my shelf without any form of protection whatsoever but I don't see how the figure can get less mint. Dust won't affect it right? And I guess canned air does the trick when eventually dust would heap up.
Dust can build up and get pretty thick to the point you need more than a duster. Colors can fade too.
2013 NYCC
2014 1st Pop at NYCC
2014 NYCC
2015 NYCC
2016 NYCC
2017 NYCC
2018 NYCC
2018 1st Proto at NYCC Fugitive Party
2019 NY Toy Fair
2019 NYCC
2021 NYCC
2022 SMF1, SMF2 and SMF Soda
2022 NYCC
2022 Fright Night II
2023 NYCC

http://www.instagram.com/jersey_jorge
2014 1st Pop at NYCC
2014 NYCC
2015 NYCC
2016 NYCC
2017 NYCC
2018 NYCC
2018 1st Proto at NYCC Fugitive Party
2019 NY Toy Fair
2019 NYCC
2021 NYCC
2022 SMF1, SMF2 and SMF Soda
2022 NYCC
2022 Fright Night II
2023 NYCC

http://www.instagram.com/jersey_jorge
- TriFeckTa
- Posts: 2706
- Joined: Tue Sep 20, 2016 3:11 pm
- Location: Little Saigon, California
- Contact:
Re: Keeping Pops mint?
What makes a pop less mint to me is if it came out of the factory with major flaws. Also sun-bleached pops obviously are not mint. Another thing is that metallic pop paintjobs will fade, which is very noticeably so when you keep them oob for a good while.
Hey there, I'm Michael and I am an Iron Man Junkie!
Iron Man POP! Collection (Production Pieces): COMPLETE
Iron Man Proto Count: 50
Iron Man Wacky Wobblers: IN PROGRESS
ISO: Gold Mark 2 Iron Man CHASE Wobbler, Gold Mark 1 Iron Man CHASE Wobbler, Gold and Silver 1/12 Freddy Stark Wobblers, and IRON MAN RELATED PROTOS
Check out my IG: @triifeckta


Iron Man POP! Collection (Production Pieces): COMPLETE
Iron Man Proto Count: 50
Iron Man Wacky Wobblers: IN PROGRESS
ISO: Gold Mark 2 Iron Man CHASE Wobbler, Gold Mark 1 Iron Man CHASE Wobbler, Gold and Silver 1/12 Freddy Stark Wobblers, and IRON MAN RELATED PROTOS
Check out my IG: @triifeckta


Who is online
Users browsing this forum: Google [Bot]


[/quote]