Keeping Pops mint?

We're not talking about soda, folks. This forum is dedicated to Funko's stylish Pop! series of vinyl figures, with or without springs.
Forum rules
This section is for general Pop discussion, not showing off your recent acquisitions. Please use the Dance Hall for collection addition pictures.

Please post Funko subscription box and item discussions in the Powered By Funko section.
CashMeOusside
Posts: 86
Joined: Mon Dec 11, 2017 2:08 pm

Keeping Pops mint?

Postby CashMeOusside » Sat Aug 18, 2018 9:05 pm

I know what the difference is between a mint and average condition box but what makes the figure itself less "mint"? I'm an OOB collector myself and some more rare Pops like Dr. Harleen are standing on my shelf without any form of protection whatsoever but I don't see how the figure can get less mint. Dust won't affect it right? And I guess canned air does the trick when eventually dust would heap up.

User avatar
ethaneee22
Posts: 139
Joined: Sat May 16, 2015 10:14 pm
Location: Florida
Contact:

Re: Keeping Pops mint?

Postby ethaneee22 » Sat Aug 18, 2018 9:32 pm

The only damage that can be done in my opinion is from sunlight or just being out in the open for a very very long time.
But with cleanings every other month, they should be just fine.
Image

User avatar
TJLAUTERBACH
Posts: 2968
Joined: Sat Feb 10, 2018 8:43 pm
Location: Baltimore

Re: Keeping Pops mint?

Postby TJLAUTERBACH » Sat Aug 18, 2018 9:47 pm

I put every pop in a pop protector and out of the sun. Feather duster the pop protectors from time to time.
Image

User avatar
Jezter
Collector of the Month
Collector of the Month
Posts: 5281
Joined: Sat Jul 12, 2014 10:53 am
Location: West Chester, PA

Re: Keeping Pops mint?

Postby Jezter » Sat Aug 18, 2018 9:53 pm

I would assume the only major damage that can be done to an OOB pop would be direct sunlight, or a room/attic/basement that is subject to extreme temp changes, like during the summer or winter. Otherwise I'd say just to dust them every couple of months and they would be fine. I'm sure some of the people who have been collecting these or items like these for 10 plus years could give a better account of how they last, I've only been collecting pops for a little over 4 years, and no issues yet from just standing on the shelves OOB.
Hey I'm John! :joker:

Pops!- 860ish
Dorbz: 35
Mystery Minis: 34
Sodas: 7
Vinyl Idolz: 2
Hikari: 1
Mini-Hikari: 1
Instagram: courtjezter

This Is Where A Really Neat Signature Is Going To Go....Eventually...Maybe.

User avatar
Valde
HOF 2022 & CotM
HOF 2022 & CotM
Posts: 5379
Joined: Wed Apr 23, 2014 4:43 pm
Location: Las Vegas
Contact:

Re: Keeping Pops mint?

Postby Valde » Sun Aug 19, 2018 12:26 am

Paint defects are about the biggest thing that makes me a Pop! not mint. It kind of sucks to see paint flaws on the face or even on the bottom of the head where the neck connects.
Grail: Super Freddy
Jason - va1de on Instagram
ImageImageImage

Jaybrd1095
Posts: 536
Joined: Wed May 09, 2018 3:07 pm

Re: Keeping Pops mint?

Postby Jaybrd1095 » Sun Aug 19, 2018 12:31 am

Defects add character, I collect for the nostalgia. Would not matter to me one bit if I got a hold of Tupac with a paint defect or not.

User avatar
datfunkojawn
Posts: 384
Joined: Mon Jul 25, 2016 11:35 pm
Location: Philadelphia, PA
Contact:

Re: Keeping Pops mint?

Postby datfunkojawn » Sun Aug 19, 2018 9:02 am

Away from direct sunlight is a +. Other than that fornthe box it best to minimize the amounts of time you take it in and out of the protector. Each time as careful as you may think you are it may cause tiny damages. I also clean my hands before touching. Sometimes your fingers have grease or oils on it.
Collecting since March '16 - Philadelphia, PA - My Motto: "Buy it NOW, Regret it LATER"
IG: datfunkojawn

ImageImageImage

User avatar
Strending625
Collector of the Month
Collector of the Month
Posts: 2858
Joined: Sun Dec 06, 2015 9:42 am
Location: Echo Base, Hoth
Contact:

Re: Keeping Pops mint?

Postby Strending625 » Sun Aug 19, 2018 1:08 pm

For OOB pops just use a swiffer duster or canned air to dust them. Try not to knock them off of the shelves. Pops with small, thin accessories can break easily when dropped. If you are storing them OOB in a box or plastic tub, try and keep something between layers so the paint doesn’t scuff. I have a lot of OOB pops in some big boxes but put layers of bubble wrap between so the paint didn’t scuff on them.
Brandon
Duty today for a funner tomorrow
Pops: More than my wife needs to know about lol

User avatar
SteakNEggs310
Posts: 170
Joined: Sun Jul 09, 2017 4:11 am

Re: Keeping Pops mint?

Postby SteakNEggs310 » Sun Aug 19, 2018 1:40 pm

I wonder if the cardboard will last like baseball cards do if protected. I've always been curious about that. How would that cardboard box look at let's say 40 or 60 years??? I guess only time will tell
Image

User avatar
MamboPop
Posts: 9
Joined: Sat Aug 18, 2018 6:04 pm

Re: Keeping Pops mint?

Postby MamboPop » Sun Aug 19, 2018 3:16 pm

What's the best way to remove dust stains especially on the face area?

Wet wipes? Wet cotton?
IG: MamboPop
:freddy3:

CashMeOusside
Posts: 86
Joined: Mon Dec 11, 2017 2:08 pm

Re: Keeping Pops mint?

Postby CashMeOusside » Sun Aug 19, 2018 7:48 pm

With direct sunlight you mean like litterally placing them by the window or something right?

User avatar
Sarcasticguy
Hall of Fame Class of 2023
Hall of Fame Class of 2023
Posts: 4535
Joined: Tue Aug 11, 2015 6:07 pm
Location: Phoenix, Arizona
Contact:

Re: Keeping Pops mint?

Postby Sarcasticguy » Sun Aug 19, 2018 8:17 pm

Valde wrote:Paint defects are about the biggest thing that makes me a Pop! not mint. It kind of sucks to see paint flaws on the face or even on the bottom of the head where the neck connects.


Because these flaws come from the factory.. wouldn't these be apart of the "minting" process? :-k

Now, with a non-devil's advocate opinion, I would say a non-mint OOB figure would be from damage, fading or scuffing.. some of which happens at the factory, unfortunately.
Hi, I'm Scott.
Instagram: @Sarcasticguy89
Image
ISO:
Any Fallout Protos
Aliens Ellen Ripley Rock Candy Proto
Furiosa and Normal Immortan Joe Protos
SDCC '13 Bloody Predator Pop!
Retro Freddy Thor | Retro Freddy Skeletor

User avatar
cptuff1969
Posts: 728
Joined: Thu Mar 08, 2018 2:32 pm
Location: Henderson Nevada
Contact:

Re: Keeping Pops mint?

Postby cptuff1969 » Fri Aug 24, 2018 1:38 am

As soon as I come home they go into a protector
Image Image[/quote]

User avatar
[llO_oll]7
Posts: 781
Joined: Fri Aug 11, 2017 8:20 pm
Location: Orange County, California

Re: Keeping Pops mint?

Postby [llO_oll]7 » Fri Aug 24, 2018 1:53 am

well for my oob collection they do sometime fall off the shelf getting scratches or dents on them. If you have the space for them, taking them out of the original box and keeping them in the insert with a clear protector is always a cool idea too.
Kevin @[llO_oll]7
ImageImage

User avatar
bspears82
Posts: 1142
Joined: Tue Jul 09, 2013 8:46 pm

Re: Keeping Pops mint?

Postby bspears82 » Fri Aug 24, 2018 6:32 am

I keep all the boxes in protectors and I go OOB. I place all of them in ball bat cases.
Image
Image

User avatar
TenTwoSix
Posts: 1312
Joined: Mon Aug 27, 2012 3:47 am

Re: Keeping Pops mint?

Postby TenTwoSix » Fri Aug 24, 2018 1:11 pm

Sometimes pops fall when OOB and get damaged. Happened to me before :(
Hi, I'm Jerry!

Image

User avatar
Thrillofthehunt
Posts: 1207
Joined: Mon Apr 18, 2016 10:21 am
Location: Phoenix, AZ

Re: Keeping Pops mint?

Postby Thrillofthehunt » Fri Aug 24, 2018 4:46 pm

I put all of my pops in a protector. as an old school comic collector, always putting everything in bags and boards, it's just my mentality lol There are plenty of websites, and places on ebay where you can buy the protectors in bulk. for roughly .50c to $1 per pop, why not just protect it from any accidental scuffs or creases? To me, it's worth it for the incremental cost seeing as how I already paid to buy the pop.
:freddy3: Image ImageImage

User avatar
Nemesis989
Posts: 2892
Joined: Thu May 04, 2017 5:51 pm
Location: Alberta, Canada

Re: Keeping Pops mint?

Postby Nemesis989 » Fri Aug 24, 2018 5:15 pm

SteakNEggs310 wrote:I wonder if the cardboard will last like baseball cards do if protected. I've always been curious about that. How would that cardboard box look at let's say 40 or 60 years??? I guess only time will tell


I assume they will look much the same as they do now, only yellower. I also bet that in 40 to 60 years a bunch of stickers will be flaking or straight up falling off. But maybe it depends on how you keep them......
Thank you everyone for this awesome community

User avatar
r2d2
Posts: 881
Joined: Sun May 25, 2014 12:08 pm
Location: Mexico City
Contact:

Re: Keeping Pops mint?

Postby r2d2 » Sat Aug 25, 2018 1:12 pm

Sarcasticguy wrote:
Valde wrote:Paint defects are about the biggest thing that makes me a Pop! not mint. It kind of sucks to see paint flaws on the face or even on the bottom of the head where the neck connects.


Because these flaws come from the factory.. wouldn't these be apart of the "minting" process? :-k

Now, with a non-devil's advocate opinion, I would say a non-mint OOB figure would be from damage, fading or scuffing.. some of which happens at the factory, unfortunately.


For me, it wouldn't matter in which stage of the Pop life the defect came in. It wouldn't be mint

User avatar
FearlessPhotog
Posts: 1048
Joined: Thu Aug 11, 2016 12:02 pm

Re: Keeping Pops mint?

Postby FearlessPhotog » Sun Aug 26, 2018 12:04 pm

Damage, no matter when it happened, would mean the piece is not mint. Now, paint errors or crappy glue job wouldn't necessary make a piece not mint.

User avatar
r2d2
Posts: 881
Joined: Sun May 25, 2014 12:08 pm
Location: Mexico City
Contact:

Re: Keeping Pops mint?

Postby r2d2 » Sun Aug 26, 2018 12:52 pm

FearlessPhotog wrote:Damage, no matter when it happened, would mean the piece is not mint. Now, paint errors or crappy glue job wouldn't necessary make a piece not mint.


Why not? If you could choose between a figure with paint errors or crappy glue job and one without it, which one would you choose?

User avatar
KidMarvel
Rookie Of The year
Rookie Of The year
Posts: 4146
Joined: Sun Mar 11, 2018 5:49 am
Location: Singapore
Contact:

Re: Keeping Pops mint?

Postby KidMarvel » Sun Aug 26, 2018 7:31 pm

Chips on the figure, fading paint due to sunlight, dust ea
setting into the material. Think those are the immediate ones I can think off!
Name: Randall
Collector of Pops, Dorbz, Minis, PSH, Hikaris and Vynl

IG: www.instagram.com/funkoforeveryone/
"A story behind every figure"
There's always room for more Disney Magic and Marvel Adventure
ImageImageImageImage
Image

User avatar
FearlessPhotog
Posts: 1048
Joined: Thu Aug 11, 2016 12:02 pm

Re: Keeping Pops mint?

Postby FearlessPhotog » Fri Aug 31, 2018 10:55 pm

r2d2 wrote:
FearlessPhotog wrote:Damage, no matter when it happened, would mean the piece is not mint. Now, paint errors or crappy glue job wouldn't necessary make a piece not mint.


Why not? If you could choose between a figure with paint errors or crappy glue job and one without it, which one would you choose?


because mint condition refers to damage on the pop or box. a bad paint job doesnt mean the pop is not mint, unless an external force cause the paint to be bad (like sun exposure). but thats just my opinion!

User avatar
andibgoode
Posts: 104
Joined: Mon Jul 30, 2018 6:08 am
Location: South Australia
Contact:

Re: Keeping Pops mint?

Postby andibgoode » Sat Sep 01, 2018 1:24 am

FearlessPhotog wrote:
r2d2 wrote:
FearlessPhotog wrote:Damage, no matter when it happened, would mean the piece is not mint. Now, paint errors or crappy glue job wouldn't necessary make a piece not mint.


Why not? If you could choose between a figure with paint errors or crappy glue job and one without it, which one would you choose?


because mint condition refers to damage on the pop or box. a bad paint job doesnt mean the pop is not mint, unless an external force cause the paint to be bad (like sun exposure). but thats just my opinion!


I’d agree with you! To me not mint = damage done after manufacturing etc. (for any item). Especially considering how common paint errors & the like are!

User avatar
FearlessPhotog
Posts: 1048
Joined: Thu Aug 11, 2016 12:02 pm

Re: Keeping Pops mint?

Postby FearlessPhotog » Sun Sep 09, 2018 11:02 am

andibgoode wrote:
FearlessPhotog wrote:
r2d2 wrote:
Why not? If you could choose between a figure with paint errors or crappy glue job and one without it, which one would you choose?


because mint condition refers to damage on the pop or box. a bad paint job doesnt mean the pop is not mint, unless an external force cause the paint to be bad (like sun exposure). but thats just my opinion!


I’d agree with you! To me not mint = damage done after manufacturing etc. (for any item). Especially considering how common paint errors & the like are!


exactly! if paint errors made something not mint, then i have news for funko collectors hahah....

T-Diamond Stylus
Posts: 267
Joined: Fri Oct 30, 2015 1:48 am
Location: NJ

Re: Keeping Pops mint?

Postby T-Diamond Stylus » Sun Sep 09, 2018 11:26 am

I'm OOB, mine fall and get scuffed. I just use a swiffer to clean from time to time. I'm not in collecting for money later on.
Image Image Image Image

User avatar
Strending625
Collector of the Month
Collector of the Month
Posts: 2858
Joined: Sun Dec 06, 2015 9:42 am
Location: Echo Base, Hoth
Contact:

Re: Keeping Pops mint?

Postby Strending625 » Sun Sep 09, 2018 11:31 am

If you are storing them together OOB just try to keep them from rubbing together otherwise you can get scuffs and paint transfer from other pops.
Brandon
Duty today for a funner tomorrow
Pops: More than my wife needs to know about lol

User avatar
Boymom4
Posts: 3339
Joined: Sun Jul 30, 2017 8:15 pm

Re: Keeping Pops mint?

Postby Boymom4 » Sun Sep 09, 2018 6:30 pm

andibgoode wrote:
FearlessPhotog wrote:
r2d2 wrote:
Why not? If you could choose between a figure with paint errors or crappy glue job and one without it, which one would you choose?


because mint condition refers to damage on the pop or box. a bad paint job doesnt mean the pop is not mint, unless an external force cause the paint to be bad (like sun exposure). but thats just my opinion!


I’d agree with you! To me not mint = damage done after manufacturing etc. (for any item). Especially considering how common paint errors & the like are!

Yes, I also agree with this. There are lots of pops that have bad paint jobs, etc (especially some of the older pops) and have never been removed from a perfect mint box, however the pop itself came directly from the manufacturing process like that. So I also feel like a pop being not mint means damage happened after manufacturing etc

User avatar
KidMarvel
Rookie Of The year
Rookie Of The year
Posts: 4146
Joined: Sun Mar 11, 2018 5:49 am
Location: Singapore
Contact:

Re: Keeping Pops mint?

Postby KidMarvel » Sun Sep 09, 2018 7:05 pm

Strending625 wrote:If you are storing them together OOB just try to keep them from rubbing together otherwise you can get scuffs and paint transfer from other pops.


Found out the hard way after a couple of mine fell like dominos and i had a chain of paint scuffs
Name: Randall
Collector of Pops, Dorbz, Minis, PSH, Hikaris and Vynl

IG: www.instagram.com/funkoforeveryone/
"A story behind every figure"
There's always room for more Disney Magic and Marvel Adventure
ImageImageImageImage
Image

War19872002
Posts: 593
Joined: Mon May 08, 2017 9:17 pm

Re: Keeping Pops mint?

Postby War19872002 » Wed Sep 12, 2018 10:43 pm

The paint jobs :(

User avatar
zaghawk
HoF 2020 & CotM
HoF 2020 & CotM
Posts: 2025
Joined: Fri Nov 07, 2014 1:43 am
Location: Bellevue, Wa
Contact:

Re: Keeping Pops mint?

Postby zaghawk » Wed Sep 12, 2018 11:20 pm

Can I just say the second the word “mint” is used by a pop collector I pretty much run the other direction.
Gavin



Image







FunKlub # 14297

User avatar
Battastic
Collector of the Month
Collector of the Month
Posts: 3751
Joined: Mon Feb 11, 2013 1:59 pm
Location: Piedmont, SC

Re: Keeping Pops mint?

Postby Battastic » Thu Sep 13, 2018 7:37 am

I once put a mint near my POPs, the box started changing colors and I freaked out. Never again, no matter how much the internet says POPs should have mints.
"If you can't have fun, if you can't laugh, if you can't enjoy it...it's not worth it." - Joey

Jortega321
Posts: 716
Joined: Thu Jun 15, 2017 2:31 am
Location: Jersey City, NJ
Contact:

Re: Keeping Pops mint?

Postby Jortega321 » Thu Sep 13, 2018 9:05 am

CashMeOusside wrote:I know what the difference is between a mint and average condition box but what makes the figure itself less "mint"? I'm an OOB collector myself and some more rare Pops like Dr. Harleen are standing on my shelf without any form of protection whatsoever but I don't see how the figure can get less mint. Dust won't affect it right? And I guess canned air does the trick when eventually dust would heap up.

Dust can build up and get pretty thick to the point you need more than a duster. Colors can fade too.
2013 NYCC
2014 1st Pop at NYCC
2014 NYCC
2015 NYCC
2016 NYCC
2017 NYCC
2018 NYCC
2018 1st Proto at NYCC Fugitive Party
2019 NY Toy Fair
2019 NYCC
2021 NYCC
2022 SMF1, SMF2 and SMF Soda
2022 NYCC
2022 Fright Night II
2023 NYCC

Image
http://www.instagram.com/jersey_jorge

User avatar
TriFeckTa
Posts: 2706
Joined: Tue Sep 20, 2016 3:11 pm
Location: Little Saigon, California
Contact:

Re: Keeping Pops mint?

Postby TriFeckTa » Thu Sep 13, 2018 9:12 am

What makes a pop less mint to me is if it came out of the factory with major flaws. Also sun-bleached pops obviously are not mint. Another thing is that metallic pop paintjobs will fade, which is very noticeably so when you keep them oob for a good while.
Hey there, I'm Michael and I am an Iron Man Junkie!
Iron Man POP! Collection (Production Pieces): COMPLETE
Iron Man Proto Count: 50
Iron Man Wacky Wobblers: IN PROGRESS

ISO: Gold Mark 2 Iron Man CHASE Wobbler, Gold Mark 1 Iron Man CHASE Wobbler, Gold and Silver 1/12 Freddy Stark Wobblers, and IRON MAN RELATED PROTOS

Check out my IG: @triifeckta
ImageImage


Return to “Pop!”

Who is online

Users browsing this forum: Baidu [Spider]