NoOtherOptions wrote:I'd bet it was changed due to ease of tooling. But yeah I don't mind the old mold.
moonkat2020 wrote:Lol I agreed! They were more Pop style then they are now. I like both styles but the old style had a cute charm about it. Glad to know I'm not alone in this was of thinking!
MikeySanz wrote:NoOtherOptions wrote:I'd bet it was changed due to ease of tooling. But yeah I don't mind the old mold.
What do you mean? Same costs for a brand new mold every time?
NoOtherOptions wrote:MikeySanz wrote:NoOtherOptions wrote:I'd bet it was changed due to ease of tooling. But yeah I don't mind the old mold.
What do you mean? Same costs for a brand new mold every time?
Might have had a higher defect rate; or adaptation to new features might have cost more. (ie Thor's helmet might not have came out in the proportions they wanted). I don't know the exact story I just know some general manufacturing issues that could have played in is all.
mactds wrote:A new Pop Classics line to bring back that super minimalistic style.
I love how many new pops have such accurate details, but also love the occasional classic simple style.
pommefille wrote:Yeah, sometimes some of the new ones seem a little less... Pop!y to me.
MikeySanz wrote:NoOtherOptions wrote:MikeySanz wrote:
What do you mean? Same costs for a brand new mold every time?
Might have had a higher defect rate; or adaptation to new features might have cost more. (ie Thor's helmet might not have came out in the proportions they wanted). I don't know the exact story I just know some general manufacturing issues that could have played in is all.
Aaaah I see! I don’t disagree, I could definitely see that being an issue. Mhm... so would it worth doing for the fun of it, or is the market past the point to even be considered!? I had Jiren from DBS in mind, his only differentiating features are his ears, not a huge hurdle I don’t think and I for one would love it.

NoOtherOptions wrote:MikeySanz wrote:NoOtherOptions wrote:
Might have had a higher defect rate; or adaptation to new features might have cost more. (ie Thor's helmet might not have came out in the proportions they wanted). I don't know the exact story I just know some general manufacturing issues that could have played in is all.
Aaaah I see! I don’t disagree, I could definitely see that being an issue. Mhm... so would it worth doing for the fun of it, or is the market past the point to even be considered!? I had Jiren from DBS in mind, his only differentiating features are his ears, not a huge hurdle I don’t think and I for one would love it.
Typically plants only run one mold at a time in a lineup. W hich is why you see restocks of characters or stuff get's vaulted is probably because it's not worth it to plug the mold back in. What I mean to say is they produce 500 batmans; switch mold 500 supermans; etc. It's not like 1 batman 1 superman. I'm sure they COULD do it; but it would probably need to be done at a scale that makes them money.
Classier wrote:The old pose still seems to pop up now and then. For example, Captain America from the Infinity War line has the classic pose.Spoiler: show

MikeySanz wrote:NoOtherOptions wrote:MikeySanz wrote:
Aaaah I see! I don’t disagree, I could definitely see that being an issue. Mhm... so would it worth doing for the fun of it, or is the market past the point to even be considered!? I had Jiren from DBS in mind, his only differentiating features are his ears, not a huge hurdle I don’t think and I for one would love it.
Typically plants only run one mold at a time in a lineup. W hich is why you see restocks of characters or stuff get's vaulted is probably because it's not worth it to plug the mold back in. What I mean to say is they produce 500 batmans; switch mold 500 supermans; etc. It's not like 1 batman 1 superman. I'm sure they COULD do it; but it would probably need to be done at a scale that makes them money.
Interesting! I want to know more! This is the kind of information that helps me sleep at night
NoOtherOptions wrote:MikeySanz wrote:NoOtherOptions wrote:
Typically plants only run one mold at a time in a lineup. W hich is why you see restocks of characters or stuff get's vaulted is probably because it's not worth it to plug the mold back in. What I mean to say is they produce 500 batmans; switch mold 500 supermans; etc. It's not like 1 batman 1 superman. I'm sure they COULD do it; but it would probably need to be done at a scale that makes them money.
Interesting! I want to know more! This is the kind of information that helps me sleep at night
Yeah; you can see it in why Nintendo had a delay getting certain products out the door (NES classic; Switch; SNES classic). You have plants that allow you to buy time; say you buy 500 production hours which is fine for say 5k units. But you run through those 5k and need another; but the plant has sold out all their production time and they only have one mold or you have another run of 5k processing for a different item. You can't just stop at 2500 and run the other 5k; you have to finish the run or drastically increase your costs because then you have to retool all your machines twice. Your alternatives are to wait; or move the mold to another plant. But it takes time to setup the presses etc. Then on top of that you have to expect a % doesn't work out and are rejected for QC issues. A hiccup anywhere along the line directly impacts your production costs.
Kyvinylzjohnson wrote:Probably helps ward off the fakes by adding the new characteristics
MikeySanz wrote:NoOtherOptions wrote:MikeySanz wrote:
Interesting! I want to know more! This is the kind of information that helps me sleep at night
Yeah; you can see it in why Nintendo had a delay getting certain products out the door (NES classic; Switch; SNES classic). You have plants that allow you to buy time; say you buy 500 production hours which is fine for say 5k units. But you run through those 5k and need another; but the plant has sold out all their production time and they only have one mold or you have another run of 5k processing for a different item. You can't just stop at 2500 and run the other 5k; you have to finish the run or drastically increase your costs because then you have to retool all your machines twice. Your alternatives are to wait; or move the mold to another plant. But it takes time to setup the presses etc. Then on top of that you have to expect a % doesn't work out and are rejected for QC issues. A hiccup anywhere along the line directly impacts your production costs.
Wow! Yeah Nintendo never saw that massive demand coming! I wonder how the plant(s) Funko is using operates, it would definitely be kool to take a tour of one! Making a more detailed/articulated figure definitely seems to be the way to go for Funko nowadaysMaybe in the past when they were smaller every penny mattered and thus the importance of a single mold.
NoOtherOptions wrote:MikeySanz wrote:NoOtherOptions wrote:
Yeah; you can see it in why Nintendo had a delay getting certain products out the door (NES classic; Switch; SNES classic). You have plants that allow you to buy time; say you buy 500 production hours which is fine for say 5k units. But you run through those 5k and need another; but the plant has sold out all their production time and they only have one mold or you have another run of 5k processing for a different item. You can't just stop at 2500 and run the other 5k; you have to finish the run or drastically increase your costs because then you have to retool all your machines twice. Your alternatives are to wait; or move the mold to another plant. But it takes time to setup the presses etc. Then on top of that you have to expect a % doesn't work out and are rejected for QC issues. A hiccup anywhere along the line directly impacts your production costs.
Wow! Yeah Nintendo never saw that massive demand coming! I wonder how the plant(s) Funko is using operates, it would definitely be kool to take a tour of one! Making a more detailed/articulated figure definitely seems to be the way to go for Funko nowadaysMaybe in the past when they were smaller every penny mattered and thus the importance of a single mold.
TBH I think that Nintendo operates a lot like Funko; smaller batch functionally similar items made to create hype. sometimes I think they do get caught off guard though (like the NES classic). I don't think you'll ever get a Funko factory tour as they're in China and may not look so luxurious haha.
MikeySanz wrote:Anybody else miss the old molds? I may be in the minority here but sometimes I wish Funko would bring back the squatty mold for a release here and there. Some of my favorite pops and ones I enjoy looking at the most are still the old DC pops, all squatting! I would definitely not mind a DBS SDCC exclusive original mold this year! Just a thought!![]()
![]()
![]()
![]()

Rickakatuna wrote:MikeySanz wrote:Anybody else miss the old molds? I may be in the minority here but sometimes I wish Funko would bring back the squatty mold for a release here and there. Some of my favorite pops and ones I enjoy looking at the most are still the old DC pops, all squatting! I would definitely not mind a DBS SDCC exclusive original mold this year! Just a thought!![]()
![]()
![]()
![]()
Yeah I like the original pose mold and dbs mold of jiren would be cool. That being said the new action poses are pretty nice too.
MikeySanz wrote:Anybody else miss the old molds? I may be in the minority here but sometimes I wish Funko would bring back the squatty mold for a release here and there. Some of my favorite pops and ones I enjoy looking at the most are still the old DC pops, all squatting! I would definitely not mind a DBS SDCC exclusive original mold this year! Just a thought!![]()
![]()
![]()
![]()
MikeySanz wrote:Rickakatuna wrote:MikeySanz wrote:Anybody else miss the old molds? I may be in the minority here but sometimes I wish Funko would bring back the squatty mold for a release here and there. Some of my favorite pops and ones I enjoy looking at the most are still the old DC pops, all squatting! I would definitely not mind a DBS SDCC exclusive original mold this year! Just a thought!![]()
![]()
![]()
![]()
Yeah I like the original pose mold and dbs mold of jiren would be cool. That being said the new action poses are pretty nice too.
Energy Blast Dragon Ball pops should be a thing! I’d be so lit for every release!

dorbz wrote:MikeySanz wrote:Anybody else miss the old molds? I may be in the minority here but sometimes I wish Funko would bring back the squatty mold for a release here and there. Some of my favorite pops and ones I enjoy looking at the most are still the old DC pops, all squatting! I would definitely not mind a DBS SDCC exclusive original mold this year! Just a thought!![]()
![]()
![]()
![]()
I´m with you. Mostly prefer the old school Pops. Funko reissued some of the old molds with the DC Silhouette line but that´s about it.


emoagogo wrote:The new molds really show how far funko has come. I love the old molds too, they have that classic feel to them. Either way 10/10 for coining the term "squatty pops"

Cccustomspop wrote:I understand the nostalgia for the original molds, but personally I usually prefer the more dynamic poses. Especially for female characters, the squatty pose isn’t all that flattering.
dcooperfl wrote:I do love the original simplicity in the molds. That was the draw for me early on. Probably also why we both like Dorbz so much.
MikeySanz wrote:dcooperfl wrote:I do love the original simplicity in the molds. That was the draw for me early on. Probably also why we both like Dorbz so much.
Wonder if Dorbz will someday “evolve” !

d3postman wrote:I'm along all points on the mold spectrum. I respect the old molds for sure. Simplicity is often perfection. However, I do love some of the complexity of the newer molds. It shows advancement and integration of many lines of talent now at Funko
Very well said!!



Users browsing this forum: Google [Bot]