Original Molds

We're not talking about soda, folks. This forum is dedicated to Funko's stylish Pop! series of vinyl figures, with or without springs.
Forum rules
This section is for general Pop discussion, not showing off your recent acquisitions. Please use the Dance Hall for collection addition pictures.

Please post Funko subscription box and item discussions in the Powered By Funko section.
User avatar
MikeySanz
Posts: 419
Joined: Wed Apr 26, 2017 7:42 pm
Contact:

Original Molds

Postby MikeySanz » Wed Mar 07, 2018 2:53 pm

Anybody else miss the old molds? I may be in the minority here but sometimes I wish Funko would bring back the squatty mold for a release here and there. Some of my favorite pops and ones I enjoy looking at the most are still the old DC pops, all squatting! I would definitely not mind a DBS SDCC exclusive original mold this year! Just a thought! :freddy2: :freddy2: :freddy1: :freddy3: :bounce:

NoOtherOptions
Posts: 899
Joined: Sat Feb 27, 2016 4:10 pm

Re: Original Molds

Postby NoOtherOptions » Wed Mar 07, 2018 3:02 pm

I'd bet it was changed due to ease of tooling. But yeah I don't mind the old mold.

moonkat2020
Posts: 162
Joined: Wed May 17, 2017 12:15 pm

Re: Original Molds

Postby moonkat2020 » Wed Mar 07, 2018 3:09 pm

Lol I agreed! They were more Pop style then they are now. I like both styles but the old style had a cute charm about it. Glad to know I'm not alone in this was of thinking!

User avatar
MikeySanz
Posts: 419
Joined: Wed Apr 26, 2017 7:42 pm
Contact:

Re: Original Molds

Postby MikeySanz » Wed Mar 07, 2018 3:20 pm

NoOtherOptions wrote:I'd bet it was changed due to ease of tooling. But yeah I don't mind the old mold.


What do you mean? Same costs for a brand new mold every time?

User avatar
MikeySanz
Posts: 419
Joined: Wed Apr 26, 2017 7:42 pm
Contact:

Re: Original Molds

Postby MikeySanz » Wed Mar 07, 2018 3:22 pm

moonkat2020 wrote:Lol I agreed! They were more Pop style then they are now. I like both styles but the old style had a cute charm about it. Glad to know I'm not alone in this was of thinking!


Right the old style just makes me happy lol

NoOtherOptions
Posts: 899
Joined: Sat Feb 27, 2016 4:10 pm

Re: Original Molds

Postby NoOtherOptions » Wed Mar 07, 2018 3:28 pm

MikeySanz wrote:
NoOtherOptions wrote:I'd bet it was changed due to ease of tooling. But yeah I don't mind the old mold.


What do you mean? Same costs for a brand new mold every time?


Might have had a higher defect rate; or adaptation to new features might have cost more. (ie Thor's helmet might not have came out in the proportions they wanted). I don't know the exact story I just know some general manufacturing issues that could have played in is all.

User avatar
mactds
Posts: 2341
Joined: Thu May 26, 2016 8:33 pm
Contact:

Re: Original Molds

Postby mactds » Wed Mar 07, 2018 3:39 pm

A new Pop Classics line to bring back that super minimalistic style.

I love how many new pops have such accurate details, but also love the occasional classic simple style.
Hi, I'm Trevor
Current Pop Count: 310
Instagram: https://www.instagram.com/mactds/

Image

User avatar
pommefille
Posts: 221
Joined: Mon Jun 13, 2016 7:31 pm
Location: Cary NC
Contact:

Re: Original Molds

Postby pommefille » Wed Mar 07, 2018 3:43 pm

Yeah, sometimes some of the new ones seem a little less... Pop!y to me.
----ig: kavka twitter: kavka fb: kavka----

User avatar
MikeySanz
Posts: 419
Joined: Wed Apr 26, 2017 7:42 pm
Contact:

Re: Original Molds

Postby MikeySanz » Wed Mar 07, 2018 3:49 pm

NoOtherOptions wrote:
MikeySanz wrote:
NoOtherOptions wrote:I'd bet it was changed due to ease of tooling. But yeah I don't mind the old mold.


What do you mean? Same costs for a brand new mold every time?


Might have had a higher defect rate; or adaptation to new features might have cost more. (ie Thor's helmet might not have came out in the proportions they wanted). I don't know the exact story I just know some general manufacturing issues that could have played in is all.


Aaaah I see! I don’t disagree, I could definitely see that being an issue. Mhm... so would it worth doing for the fun of it, or is the market past the point to even be considered!? I had Jiren from DBS in mind, his only differentiating features are his ears, not a huge hurdle I don’t think and I for one would love it.

User avatar
MikeySanz
Posts: 419
Joined: Wed Apr 26, 2017 7:42 pm
Contact:

Re: Original Molds

Postby MikeySanz » Wed Mar 07, 2018 3:50 pm

mactds wrote:A new Pop Classics line to bring back that super minimalistic style.

I love how many new pops have such accurate details, but also love the occasional classic simple style.


Pop classics! I like that!

User avatar
MikeySanz
Posts: 419
Joined: Wed Apr 26, 2017 7:42 pm
Contact:

Re: Original Molds

Postby MikeySanz » Wed Mar 07, 2018 3:51 pm

pommefille wrote:Yeah, sometimes some of the new ones seem a little less... Pop!y to me.


less Pop!y lol Agreed!

User avatar
kingdomcustoms
Posts: 622
Joined: Wed Jan 17, 2018 9:33 am
Location: Criciuma
Contact:

Re: Original Molds

Postby kingdomcustoms » Wed Mar 07, 2018 3:59 pm

I much prefer the newer Pops, the detail and likeness to characters is much better. However, some of the older simpler Pops do have a certain charm to them, but its also because of age and value a lot of the time. Sonic's a cracking example, as the newer one is so so much better (less creepy), but who would turn the OG one away?
:freddy2:
Pop Count: ~300; Latest: Spirit Mufasa
Dorbz Count: 70; Latest: Huckleberry Hound 8-pack
Rock Candy's: 24; Latest: Belle
Favourite Pop's: Hades Chase, Pain & Panic, Lord Drakkon
Favourite Dorbz: Alice 4-pack, Green Arrow/Black Canary, Penelope Pitstop
Favourite Rock Candy's: Sirius, Bellatrix, and Jessica Rabbit
Custom Count: 25 Pops, 5 PSH, 48 Dorbz, 17 Misc; Most Recent: Kermit PSH

NoOtherOptions
Posts: 899
Joined: Sat Feb 27, 2016 4:10 pm

Re: Original Molds

Postby NoOtherOptions » Thu Mar 08, 2018 8:35 am

MikeySanz wrote:
NoOtherOptions wrote:
MikeySanz wrote:
What do you mean? Same costs for a brand new mold every time?


Might have had a higher defect rate; or adaptation to new features might have cost more. (ie Thor's helmet might not have came out in the proportions they wanted). I don't know the exact story I just know some general manufacturing issues that could have played in is all.


Aaaah I see! I don’t disagree, I could definitely see that being an issue. Mhm... so would it worth doing for the fun of it, or is the market past the point to even be considered!? I had Jiren from DBS in mind, his only differentiating features are his ears, not a huge hurdle I don’t think and I for one would love it.


Typically plants only run one mold at a time in a lineup. W hich is why you see restocks of characters or stuff get's vaulted is probably because it's not worth it to plug the mold back in. What I mean to say is they produce 500 batmans; switch mold 500 supermans; etc. It's not like 1 batman 1 superman. I'm sure they COULD do it; but it would probably need to be done at a scale that makes them money.

User avatar
Classier
Posts: 2451
Joined: Mon Dec 19, 2016 12:28 pm
Location: Spokane, WA

Re: Original Molds

Postby Classier » Thu Mar 08, 2018 10:19 am

The old pose still seems to pop up now and then. For example, Captain America from the Infinity War line has the classic pose.
Spoiler: show
Image
Image

User avatar
MikeySanz
Posts: 419
Joined: Wed Apr 26, 2017 7:42 pm
Contact:

Re: Original Molds

Postby MikeySanz » Thu Mar 08, 2018 12:23 pm

NoOtherOptions wrote:
MikeySanz wrote:
NoOtherOptions wrote:
Might have had a higher defect rate; or adaptation to new features might have cost more. (ie Thor's helmet might not have came out in the proportions they wanted). I don't know the exact story I just know some general manufacturing issues that could have played in is all.


Aaaah I see! I don’t disagree, I could definitely see that being an issue. Mhm... so would it worth doing for the fun of it, or is the market past the point to even be considered!? I had Jiren from DBS in mind, his only differentiating features are his ears, not a huge hurdle I don’t think and I for one would love it.


Typically plants only run one mold at a time in a lineup. W hich is why you see restocks of characters or stuff get's vaulted is probably because it's not worth it to plug the mold back in. What I mean to say is they produce 500 batmans; switch mold 500 supermans; etc. It's not like 1 batman 1 superman. I'm sure they COULD do it; but it would probably need to be done at a scale that makes them money.


Interesting! I want to know more! This is the kind of information that helps me sleep at night lol

User avatar
MikeySanz
Posts: 419
Joined: Wed Apr 26, 2017 7:42 pm
Contact:

Re: Original Molds

Postby MikeySanz » Thu Mar 08, 2018 12:29 pm

Classier wrote:The old pose still seems to pop up now and then. For example, Captain America from the Infinity War line has the classic pose.
Spoiler: show
Image


Oh wow!

User avatar
MegaPool
Posts: 190
Joined: Mon Jun 12, 2017 10:57 am
Location: San Diego, CA
Contact:

Re: Original Molds

Postby MegaPool » Thu Mar 08, 2018 12:35 pm

I agree, I miss the old molds, they were simple, but I liked how each kinda of had there own personality even though they all looked the same. IMO
Hi, I'm JohnPaul IG:@M3GATRONUS

Image

NoOtherOptions
Posts: 899
Joined: Sat Feb 27, 2016 4:10 pm

Re: Original Molds

Postby NoOtherOptions » Thu Mar 08, 2018 1:15 pm

MikeySanz wrote:
NoOtherOptions wrote:
MikeySanz wrote:
Aaaah I see! I don’t disagree, I could definitely see that being an issue. Mhm... so would it worth doing for the fun of it, or is the market past the point to even be considered!? I had Jiren from DBS in mind, his only differentiating features are his ears, not a huge hurdle I don’t think and I for one would love it.


Typically plants only run one mold at a time in a lineup. W hich is why you see restocks of characters or stuff get's vaulted is probably because it's not worth it to plug the mold back in. What I mean to say is they produce 500 batmans; switch mold 500 supermans; etc. It's not like 1 batman 1 superman. I'm sure they COULD do it; but it would probably need to be done at a scale that makes them money.


Interesting! I want to know more! This is the kind of information that helps me sleep at night lol


Yeah; you can see it in why Nintendo had a delay getting certain products out the door (NES classic; Switch; SNES classic). You have plants that allow you to buy time; say you buy 500 production hours which is fine for say 5k units. But you run through those 5k and need another; but the plant has sold out all their production time and they only have one mold or you have another run of 5k processing for a different item. You can't just stop at 2500 and run the other 5k; you have to finish the run or drastically increase your costs because then you have to retool all your machines twice. Your alternatives are to wait; or move the mold to another plant. But it takes time to setup the presses etc. Then on top of that you have to expect a % doesn't work out and are rejected for QC issues. A hiccup anywhere along the line directly impacts your production costs.

User avatar
Kyvinylzjohnson
Posts: 147
Joined: Thu May 18, 2017 9:35 pm
Location: San Diego

Re: Original Molds

Postby Kyvinylzjohnson » Thu Mar 08, 2018 1:37 pm

Probably helps ward off the fakes by adding the new characteristics

User avatar
MikeySanz
Posts: 419
Joined: Wed Apr 26, 2017 7:42 pm
Contact:

Re: Original Molds

Postby MikeySanz » Fri Mar 09, 2018 3:30 pm

NoOtherOptions wrote:
MikeySanz wrote:
NoOtherOptions wrote:
Typically plants only run one mold at a time in a lineup. W hich is why you see restocks of characters or stuff get's vaulted is probably because it's not worth it to plug the mold back in. What I mean to say is they produce 500 batmans; switch mold 500 supermans; etc. It's not like 1 batman 1 superman. I'm sure they COULD do it; but it would probably need to be done at a scale that makes them money.


Interesting! I want to know more! This is the kind of information that helps me sleep at night lol


Yeah; you can see it in why Nintendo had a delay getting certain products out the door (NES classic; Switch; SNES classic). You have plants that allow you to buy time; say you buy 500 production hours which is fine for say 5k units. But you run through those 5k and need another; but the plant has sold out all their production time and they only have one mold or you have another run of 5k processing for a different item. You can't just stop at 2500 and run the other 5k; you have to finish the run or drastically increase your costs because then you have to retool all your machines twice. Your alternatives are to wait; or move the mold to another plant. But it takes time to setup the presses etc. Then on top of that you have to expect a % doesn't work out and are rejected for QC issues. A hiccup anywhere along the line directly impacts your production costs.


Wow! Yeah Nintendo never saw that massive demand coming! I wonder how the plant(s) Funko is using operates, it would definitely be kool to take a tour of one! Making a more detailed/articulated figure definitely seems to be the way to go for Funko nowadays lol Maybe in the past when they were smaller every penny mattered and thus the importance of a single mold.

NoOtherOptions
Posts: 899
Joined: Sat Feb 27, 2016 4:10 pm

Re: Original Molds

Postby NoOtherOptions » Fri Mar 09, 2018 3:53 pm

Kyvinylzjohnson wrote:Probably helps ward off the fakes by adding the new characteristics



I think most of the pops are probably forged immediately; I think most of them are just remolded or stolen molds from the plants. The giveaway is usually in the packaging and paint as those are typically costlier.

NoOtherOptions
Posts: 899
Joined: Sat Feb 27, 2016 4:10 pm

Re: Original Molds

Postby NoOtherOptions » Fri Mar 09, 2018 3:55 pm

MikeySanz wrote:
NoOtherOptions wrote:
MikeySanz wrote:
Interesting! I want to know more! This is the kind of information that helps me sleep at night lol


Yeah; you can see it in why Nintendo had a delay getting certain products out the door (NES classic; Switch; SNES classic). You have plants that allow you to buy time; say you buy 500 production hours which is fine for say 5k units. But you run through those 5k and need another; but the plant has sold out all their production time and they only have one mold or you have another run of 5k processing for a different item. You can't just stop at 2500 and run the other 5k; you have to finish the run or drastically increase your costs because then you have to retool all your machines twice. Your alternatives are to wait; or move the mold to another plant. But it takes time to setup the presses etc. Then on top of that you have to expect a % doesn't work out and are rejected for QC issues. A hiccup anywhere along the line directly impacts your production costs.


Wow! Yeah Nintendo never saw that massive demand coming! I wonder how the plant(s) Funko is using operates, it would definitely be kool to take a tour of one! Making a more detailed/articulated figure definitely seems to be the way to go for Funko nowadays lol Maybe in the past when they were smaller every penny mattered and thus the importance of a single mold.


TBH I think that Nintendo operates a lot like Funko; smaller batch functionally similar items made to create hype. sometimes I think they do get caught off guard though (like the NES classic). I don't think you'll ever get a Funko factory tour as they're in China and may not look so luxurious haha.

User avatar
MikeySanz
Posts: 419
Joined: Wed Apr 26, 2017 7:42 pm
Contact:

Re: Original Molds

Postby MikeySanz » Fri Mar 09, 2018 4:10 pm

NoOtherOptions wrote:
MikeySanz wrote:
NoOtherOptions wrote:
Yeah; you can see it in why Nintendo had a delay getting certain products out the door (NES classic; Switch; SNES classic). You have plants that allow you to buy time; say you buy 500 production hours which is fine for say 5k units. But you run through those 5k and need another; but the plant has sold out all their production time and they only have one mold or you have another run of 5k processing for a different item. You can't just stop at 2500 and run the other 5k; you have to finish the run or drastically increase your costs because then you have to retool all your machines twice. Your alternatives are to wait; or move the mold to another plant. But it takes time to setup the presses etc. Then on top of that you have to expect a % doesn't work out and are rejected for QC issues. A hiccup anywhere along the line directly impacts your production costs.


Wow! Yeah Nintendo never saw that massive demand coming! I wonder how the plant(s) Funko is using operates, it would definitely be kool to take a tour of one! Making a more detailed/articulated figure definitely seems to be the way to go for Funko nowadays lol Maybe in the past when they were smaller every penny mattered and thus the importance of a single mold.


TBH I think that Nintendo operates a lot like Funko; smaller batch functionally similar items made to create hype. sometimes I think they do get caught off guard though (like the NES classic). I don't think you'll ever get a Funko factory tour as they're in China and may not look so luxurious haha.


I was thinking the same thing!! lol I’d fly out to China! However I could see the not so luxurious being an issue haha

User avatar
Rickakatuna
Posts: 2512
Joined: Fri Apr 15, 2016 11:01 pm
Location: Surprise, Arizona
Contact:

Re: Original Molds

Postby Rickakatuna » Fri Mar 09, 2018 4:38 pm

MikeySanz wrote:Anybody else miss the old molds? I may be in the minority here but sometimes I wish Funko would bring back the squatty mold for a release here and there. Some of my favorite pops and ones I enjoy looking at the most are still the old DC pops, all squatting! I would definitely not mind a DBS SDCC exclusive original mold this year! Just a thought! :freddy2: :freddy2: :freddy1: :freddy3: :bounce:

Yeah I like the original pose mold and dbs mold of jiren would be cool. That being said the new action poses are pretty nice too.
Hi Im Ricky
Im into Anime, Marvel, Dc, Disney, Fantastik Plastik, Rick & Morty, Freddy funko and Ad Icons
Pops:700+
Dorbz:30+
Been collecting since 2014
ISO: Dragon Ball Protos and my hero academia
Image

User avatar
MikeySanz
Posts: 419
Joined: Wed Apr 26, 2017 7:42 pm
Contact:

Re: Original Molds

Postby MikeySanz » Fri Mar 09, 2018 4:56 pm

Rickakatuna wrote:
MikeySanz wrote:Anybody else miss the old molds? I may be in the minority here but sometimes I wish Funko would bring back the squatty mold for a release here and there. Some of my favorite pops and ones I enjoy looking at the most are still the old DC pops, all squatting! I would definitely not mind a DBS SDCC exclusive original mold this year! Just a thought! :freddy2: :freddy2: :freddy1: :freddy3: :bounce:

Yeah I like the original pose mold and dbs mold of jiren would be cool. That being said the new action poses are pretty nice too.


Energy Blast Dragon Ball pops should be a thing! I’d be so lit for every release!

dorbz
Posts: 118
Joined: Wed May 17, 2017 3:01 am
Location: Berlin

Re: Original Molds

Postby dorbz » Fri Mar 09, 2018 5:47 pm

MikeySanz wrote:Anybody else miss the old molds? I may be in the minority here but sometimes I wish Funko would bring back the squatty mold for a release here and there. Some of my favorite pops and ones I enjoy looking at the most are still the old DC pops, all squatting! I would definitely not mind a DBS SDCC exclusive original mold this year! Just a thought! :freddy2: :freddy2: :freddy1: :freddy3: :bounce:


I´m with you. Mostly prefer the old school Pops. Funko reissued some of the old molds with the DC Silhouette line but that´s about it.

User avatar
Rickakatuna
Posts: 2512
Joined: Fri Apr 15, 2016 11:01 pm
Location: Surprise, Arizona
Contact:

Re: Original Molds

Postby Rickakatuna » Fri Mar 09, 2018 7:53 pm

MikeySanz wrote:
Rickakatuna wrote:
MikeySanz wrote:Anybody else miss the old molds? I may be in the minority here but sometimes I wish Funko would bring back the squatty mold for a release here and there. Some of my favorite pops and ones I enjoy looking at the most are still the old DC pops, all squatting! I would definitely not mind a DBS SDCC exclusive original mold this year! Just a thought! :freddy2: :freddy2: :freddy1: :freddy3: :bounce:

Yeah I like the original pose mold and dbs mold of jiren would be cool. That being said the new action poses are pretty nice too.


Energy Blast Dragon Ball pops should be a thing! I’d be so lit for every release!

They kind of are with the new goku black.
Hi Im Ricky
Im into Anime, Marvel, Dc, Disney, Fantastik Plastik, Rick & Morty, Freddy funko and Ad Icons
Pops:700+
Dorbz:30+
Been collecting since 2014
ISO: Dragon Ball Protos and my hero academia
Image

User avatar
MikeySanz
Posts: 419
Joined: Wed Apr 26, 2017 7:42 pm
Contact:

Re: Original Molds

Postby MikeySanz » Sat Mar 10, 2018 12:27 pm

dorbz wrote:
MikeySanz wrote:Anybody else miss the old molds? I may be in the minority here but sometimes I wish Funko would bring back the squatty mold for a release here and there. Some of my favorite pops and ones I enjoy looking at the most are still the old DC pops, all squatting! I would definitely not mind a DBS SDCC exclusive original mold this year! Just a thought! :freddy2: :freddy2: :freddy1: :freddy3: :bounce:


I´m with you. Mostly prefer the old school Pops. Funko reissued some of the old molds with the DC Silhouette line but that´s about it.


Yeah those were pretty recent, they were okay!

User avatar
The Head
Posts: 2714
Joined: Sat Oct 17, 2015 3:04 pm
Location: Garpax FIRED!!! Kinda...

Re: Original Molds

Postby The Head » Sat Mar 10, 2018 2:03 pm

I go both ways (heyo!!). I like the uniformity of the old molds, but also really like action pose pops and newer style as well. I haven't displayed too much out of box yet, but I have a feeling they might look a little funny next to each other. When I finally display my pops, I may need to set them up almost like a timeline to show when they introduced new formats.

User avatar
levixkelly
Posts: 862
Joined: Sat May 13, 2017 3:18 pm
Location: Kent, WA
Contact:

Re: Original Molds

Postby levixkelly » Mon Mar 12, 2018 5:09 am

I like both, but I do like the original molds a little bit more.
Hi, I'm Levi
Instagram:
@levikelly90
Twitter: @levikelly90

Image Image

User avatar
emoagogo
HoF 2023 & Spirit
HoF 2023 & Spirit
Posts: 2391
Joined: Tue May 09, 2017 2:16 pm
Location: San Diego
Contact:

Re: Original Molds

Postby emoagogo » Mon Mar 12, 2018 7:52 am

The new molds really show how far funko has come. I love the old molds too, they have that classic feel to them. Either way 10/10 for coining the term "squatty pops" lol
Image

Emo or Emilio is fine.
ISO: Pixar Protos
IG: emoagogo

User avatar
MikeySanz
Posts: 419
Joined: Wed Apr 26, 2017 7:42 pm
Contact:

Re: Original Molds

Postby MikeySanz » Mon Mar 12, 2018 9:24 pm

emoagogo wrote:The new molds really show how far funko has come. I love the old molds too, they have that classic feel to them. Either way 10/10 for coining the term "squatty pops" lol


I agree! I can’t take full credit for that term lol I remember long ago when my once friend told me they looked like as if they were “struggling” and I was never able to look at them the same way

User avatar
Cccustomspop
Posts: 1166
Joined: Mon Mar 06, 2017 2:13 am
Location: Salt Lake City
Contact:

Re: Original Molds

Postby Cccustomspop » Mon Mar 12, 2018 10:04 pm

I understand the nostalgia for the original molds, but personally I usually prefer the more dynamic poses. Especially for female characters, the squatty pose isn’t all that flattering.
Image
Instagram: cccustomspop
FB: fb.com/cccustomspop

User avatar
dcooperfl
Posts: 1418
Joined: Thu Jul 16, 2015 2:00 am
Location: Austin, TX

Re: Original Molds

Postby dcooperfl » Mon Mar 12, 2018 10:08 pm

I do love the original simplicity in the molds. That was the draw for me early on. Probably also why we both like Dorbz so much.
Damien | Austin, TX | @dcooperfl

User avatar
MikeySanz
Posts: 419
Joined: Wed Apr 26, 2017 7:42 pm
Contact:

Re: Original Molds

Postby MikeySanz » Mon Mar 12, 2018 10:15 pm

Cccustomspop wrote:I understand the nostalgia for the original molds, but personally I usually prefer the more dynamic poses. Especially for female characters, the squatty pose isn’t all that flattering.


lol Yes unflattering forsure! The dynamic poses with the clear stands holding them in the air are definitely some of my favorite! Leaping Deadpool and Iron man are awesome!

User avatar
MikeySanz
Posts: 419
Joined: Wed Apr 26, 2017 7:42 pm
Contact:

Re: Original Molds

Postby MikeySanz » Mon Mar 12, 2018 10:18 pm

dcooperfl wrote:I do love the original simplicity in the molds. That was the draw for me early on. Probably also why we both like Dorbz so much.


Wonder if Dorbz will someday “evolve” !

User avatar
dcooperfl
Posts: 1418
Joined: Thu Jul 16, 2015 2:00 am
Location: Austin, TX

Re: Original Molds

Postby dcooperfl » Tue Mar 13, 2018 1:06 am

MikeySanz wrote:
dcooperfl wrote:I do love the original simplicity in the molds. That was the draw for me early on. Probably also why we both like Dorbz so much.


Wonder if Dorbz will someday “evolve” !


I hope not. Besides, I think the nature of the Dorbz wouldn’t lend itself to evolving.
Damien | Austin, TX | @dcooperfl

User avatar
d3postman
Posts: 832
Joined: Thu Jul 07, 2016 11:04 pm
Location: Boise, ID
Contact:

Re: Original Molds

Postby d3postman » Tue Mar 13, 2018 1:11 am

I'm along all points on the mold spectrum. I respect the old molds for sure. Simplicity is often perfection. However, I do love some of the complexity of the newer molds. It shows advancement and integration of many lines of talent now at Funko
Image

Funko Fundays: 2015, 2019, 2021

SDCC: 2014, 2015, 2016, 2017, 2018, 2019, 2022

FDO: FDO8

User avatar
MikeySanz
Posts: 419
Joined: Wed Apr 26, 2017 7:42 pm
Contact:

Re: Original Molds

Postby MikeySanz » Tue Mar 13, 2018 1:16 am

d3postman wrote:I'm along all points on the mold spectrum. I respect the old molds for sure. Simplicity is often perfection. However, I do love some of the complexity of the newer molds. It shows advancement and integration of many lines of talent now at Funko


=D> =D> =D> Very well said!!

User avatar
o2thedbld5
Posts: 1132
Joined: Wed Aug 09, 2017 2:47 pm
Location: Orange County
Contact:

Re: Original Molds

Postby o2thedbld5 » Tue Mar 13, 2018 1:17 am

The squatting stance actually would make some of them stand better too. There are many of them nowadays that have really skinny legs and even with the stand they look weird.
This be Aud, o2thedbld, odd!
Fav pop: Thumper :bunny:
ISO: The Jesus from The Big Lebowski, Audrey Hepburn Wacky Wobbler, Mars Attacks Martian

ImageImageImage


Return to “Pop!”

Who is online

Users browsing this forum: No registered users