Transferring Stickers

We're not talking about soda, folks. This forum is dedicated to Funko's stylish Pop! series of vinyl figures, with or without springs.
Forum rules
This section is for general Pop discussion, not showing off your recent acquisitions. Please use the Dance Hall for collection addition pictures.

Please post Funko subscription box and item discussions in the Powered By Funko section.
rdgmjv11
Posts: 603
Joined: Sun Sep 07, 2014 12:45 pm

Transferring Stickers

Postby rdgmjv11 » Thu Sep 15, 2016 12:30 pm

Just ordered a Duck Dodgers Chase from BigBadToys.com. Just in case my box comes damaged, I plan to swap boxes with my standard Duck Dodgers box. My question is - how do I swap out the sticker, step by step? I've seen discussions of people doing it, but want to know exactly how to go about doing so for my own records.

Thanks!
399 POPs and counting...
My Collection: http://www.poppriceguide.com/guide/member/collection/rdgmjv11/3HWTZ8ZV4OQFKAH8/
Grails Needed: The Grady Twins (The Shining)

anm00727
Posts: 423
Joined: Sat Jan 16, 2016 11:36 pm
Location: CanEHda
Contact:

Re: Transferring Stickers

Postby anm00727 » Thu Sep 15, 2016 12:43 pm

I use a hairdryer on medium or low to heat up the sticker. Peel off sticker delicately, possibly using an exact to lift it up initially.
IG: funko.max
Started collecting: Jan 01, 2016
POP!s: 350

Fundays: 2018

ISO:
- Pops: Freddy Boba Fett [LE24], Freddy Clone Trooper [LE12]
- Minis: Lurtz, Eowen, Witch King, Nazgul, Gimli
- Wobblers: LOTR/Hobbit

rdgmjv11
Posts: 603
Joined: Sun Sep 07, 2014 12:45 pm

Re: Transferring Stickers

Postby rdgmjv11 » Thu Sep 15, 2016 12:56 pm

anm00727 wrote:I use a hairdryer on medium or low to heat up the sticker. Peel off sticker delicately, possibly using an exact to lift it up initially.


Would a box cutter work, for peeling it off?

And I imagine applying it to the new box is as simple as placing it in the correct spot?
399 POPs and counting...
My Collection: http://www.poppriceguide.com/guide/member/collection/rdgmjv11/3HWTZ8ZV4OQFKAH8/
Grails Needed: The Grady Twins (The Shining)

User avatar
nyel24
Posts: 1150
Joined: Thu May 08, 2014 5:47 pm

Re: Transferring Stickers

Postby nyel24 » Thu Sep 15, 2016 1:08 pm

i probably wouldn't use a box cutter to peel it off.
Image

rdgmjv11
Posts: 603
Joined: Sun Sep 07, 2014 12:45 pm

Re: Transferring Stickers

Postby rdgmjv11 » Thu Sep 15, 2016 1:16 pm

nyel24 wrote:i probably wouldn't use a box cutter to peel it off.


I mean after using the hair dryer. Sorry, should've been more specific.
399 POPs and counting...
My Collection: http://www.poppriceguide.com/guide/member/collection/rdgmjv11/3HWTZ8ZV4OQFKAH8/
Grails Needed: The Grady Twins (The Shining)

User avatar
Sarcasticguy
Hall of Fame Class of 2023
Hall of Fame Class of 2023
Posts: 4535
Joined: Tue Aug 11, 2015 6:07 pm
Location: Phoenix, Arizona
Contact:

Re: Transferring Stickers

Postby Sarcasticguy » Thu Sep 15, 2016 1:20 pm

Definitely use a hair dryer to loosen the glue, then maybe a pair of tweezers or an exacto knife to get under the sticker and lift it off.
Hi, I'm Scott.
Instagram: @Sarcasticguy89
Image
ISO:
Any Fallout Protos
Aliens Ellen Ripley Rock Candy Proto
Furiosa and Normal Immortan Joe Protos
SDCC '13 Bloody Predator Pop!
Retro Freddy Thor | Retro Freddy Skeletor

rdgmjv11
Posts: 603
Joined: Sun Sep 07, 2014 12:45 pm

Re: Transferring Stickers

Postby rdgmjv11 » Thu Sep 15, 2016 1:24 pm

Sarcasticguy wrote:Definitely use a hair dryer to loosen the glue, then maybe a pair of tweezers or an exacto knife to get under the sticker and lift it off.


Perfect. I can do that.

About how long, for the hair dryer? And do I need to "glue" the sticker back to the new box, or will there still be enough adhesive for it to stick?
399 POPs and counting...
My Collection: http://www.poppriceguide.com/guide/member/collection/rdgmjv11/3HWTZ8ZV4OQFKAH8/
Grails Needed: The Grady Twins (The Shining)

User avatar
meangene
HoF 2020 & CotM
HoF 2020 & CotM
Posts: 880
Joined: Thu Jun 06, 2013 9:07 pm
Location: Orlando
Contact:

Re: Transferring Stickers

Postby meangene » Thu Sep 15, 2016 1:26 pm

Just use a hairdryer and peel it off carefully. You shouldn't use a box cutter. Good luck!
Gene

___________________________________________
Instagram meangene924

anm00727
Posts: 423
Joined: Sat Jan 16, 2016 11:36 pm
Location: CanEHda
Contact:

Re: Transferring Stickers

Postby anm00727 » Thu Sep 15, 2016 1:32 pm

You should apply the sticker on the new box right away, and it should be gravy.

If by chance it loses its adhesive Ness, you can buy a can of spray adhesive and do a light coat on the sticker (at the sticky part obviousyl)
IG: funko.max
Started collecting: Jan 01, 2016
POP!s: 350

Fundays: 2018

ISO:
- Pops: Freddy Boba Fett [LE24], Freddy Clone Trooper [LE12]
- Minis: Lurtz, Eowen, Witch King, Nazgul, Gimli
- Wobblers: LOTR/Hobbit

rdgmjv11
Posts: 603
Joined: Sun Sep 07, 2014 12:45 pm

Re: Transferring Stickers

Postby rdgmjv11 » Thu Sep 15, 2016 1:36 pm

anm00727 wrote:You should apply the sticker on the new box right away, and it should be gravy.

If by chance it loses its adhesive Ness, you can buy a can of spray adhesive and do a light coat on the sticker (at the sticky part obviousyl)


Great. Thanks!
399 POPs and counting...
My Collection: http://www.poppriceguide.com/guide/member/collection/rdgmjv11/3HWTZ8ZV4OQFKAH8/
Grails Needed: The Grady Twins (The Shining)

User avatar
treswright
Posts: 6045
Joined: Mon May 25, 2015 4:11 am
Location: Dallas, TX
Contact:

Re: Transferring Stickers

Postby treswright » Thu Sep 15, 2016 2:00 pm

anm00727 wrote:You should apply the sticker on the new box right away, and it should be gravy.

If by chance it loses its adhesive Ness, you can buy a can of spray adhesive and do a light coat on the sticker (at the sticky part obviousyl)


I've used spray adhesive before on stickers that fell off the boxes. Works great.
Howdy, I'm Tres :-)

Image

snapcracklePOP
Posts: 10
Joined: Fri Jan 29, 2016 12:53 pm

Re: Transferring Stickers

Postby snapcracklePOP » Thu Sep 15, 2016 2:29 pm

When I've had trouble with stickers, I've even just swapped out the whole window. A little more work, but pretty clean.

rdgmjv11
Posts: 603
Joined: Sun Sep 07, 2014 12:45 pm

Re: Transferring Stickers

Postby rdgmjv11 » Thu Sep 15, 2016 2:39 pm

snapcracklePOP wrote:When I've had trouble with stickers, I've even just swapped out the whole window. A little more work, but pretty clean.


How do you go about doing that?
399 POPs and counting...
My Collection: http://www.poppriceguide.com/guide/member/collection/rdgmjv11/3HWTZ8ZV4OQFKAH8/
Grails Needed: The Grady Twins (The Shining)

snapcracklePOP
Posts: 10
Joined: Fri Jan 29, 2016 12:53 pm

Re: Transferring Stickers

Postby snapcracklePOP » Thu Sep 15, 2016 7:38 pm

The few times I've done it, I used a razor blade on the inside of the window seam to separate the glue or you carefully peel them apart from one another. To put a new one on is a little more tricky, you can use double sided tape or super glue and go around the edges of the window or box to ensure they aren't visible and squeeze between your fingers until secure.

I'm definitely a fan of removing the sticker first over the whole window method, but its really nice when you also have a damaged window.

User avatar
Hopesdenial
Posts: 1428
Joined: Wed May 30, 2012 11:59 pm

Re: Transferring Stickers

Postby Hopesdenial » Thu Sep 15, 2016 9:34 pm

Definitely a scary situation. If your nail is long enough, I suppose you can do that to lift the sticker after heating.
Image Image

"We come to this place for magic. We come to funkofunatic.com to laugh, to cry, to care. Because we need that, all of us."

Board name origin - I was an emo singer and guitarist; I'm not trying to sound mean lol

User avatar
treswright
Posts: 6045
Joined: Mon May 25, 2015 4:11 am
Location: Dallas, TX
Contact:

Re: Transferring Stickers

Postby treswright » Thu Sep 15, 2016 10:05 pm

snapcracklePOP wrote:The few times I've done it, I used a razor blade on the inside of the window seam to separate the glue or you carefully peel them apart from one another. To put a new one on is a little more tricky, you can use double sided tape or super glue and go around the edges of the window or box to ensure they aren't visible and squeeze between your fingers until secure.

I'm definitely a fan of removing the sticker first over the whole window method, but its really nice when you also have a damaged window.


Put the whole box in the freezer for an hour and the window will pop right out of the box.
Howdy, I'm Tres :-)

Image

User avatar
booboo79
Collector of the Month
Collector of the Month
Posts: 1159
Joined: Sat Oct 10, 2015 2:39 pm
Location: New York, NY
Contact:

Re: Transferring Stickers

Postby booboo79 » Fri Sep 16, 2016 8:52 am

treswright wrote:
anm00727 wrote:You should apply the sticker on the new box right away, and it should be gravy.

If by chance it loses its adhesive Ness, you can buy a can of spray adhesive and do a light coat on the sticker (at the sticky part obviousyl)


I've used spray adhesive before on stickers that fell off the boxes. Works great.


Is there a specific brand of spray adhesive you prefer to use and where can it be purchased? Thanks in advance!
Hi, I'm Charlie!
Instagram: @CharlieRestreps


Image Image Image Image Image


User avatar
meangene
HoF 2020 & CotM
HoF 2020 & CotM
Posts: 880
Joined: Thu Jun 06, 2013 9:07 pm
Location: Orlando
Contact:

Re: Transferring Stickers

Postby meangene » Fri Sep 16, 2016 9:13 am

treswright wrote:
snapcracklePOP wrote:The few times I've done it, I used a razor blade on the inside of the window seam to separate the glue or you carefully peel them apart from one another. To put a new one on is a little more tricky, you can use double sided tape or super glue and go around the edges of the window or box to ensure they aren't visible and squeeze between your fingers until secure.

I'm definitely a fan of removing the sticker first over the whole window method, but its really nice when you also have a damaged window.


Put the whole box in the freezer for an hour and the window will pop right out of the box.



I think I'm going to try this one just for fun lol :compress:
Gene

___________________________________________
Instagram meangene924

User avatar
treswright
Posts: 6045
Joined: Mon May 25, 2015 4:11 am
Location: Dallas, TX
Contact:

Re: Transferring Stickers

Postby treswright » Fri Sep 16, 2016 9:17 am

booboo79 wrote:Is there a specific brand of spray adhesive you prefer to use and where can it be purchased? Thanks in advance!


Sure, no problem! I get the 3M stuff from Walmart, it's this:

https://www.walmart.com/ip/19412027?wml ... 3=&veh=sem

It's not cheap but a can lasts a long time. I use it a lot for the scenes and dioramas I make to glue paper to foam core. I've also used it to glue photos to paper, for kid's school projects, even to glue vintage trading cards back onto loose backings.

If you're gluing something like these box stickers, then place the sticker face down on a scrap piece of paper or cardboard. Use a toothpick to hold it down so it doesn't blow away when you spray it (from the can pressure). Hold the can about 10" away and just hit it with a quick burst. Let the glue "tack up" for a minute or so and then put the sticker in place.

Do this outdoors or in your garage because the stuff does have an odor.

After you're done, turn the can upside down, point it into a trash can or out into the yard or something and spray until nothing but air comes out. This clears the nozzle so you can use it again and again and again :-) I do this for spray paint too. Works great. I have cans that are many years old that I still use.
Howdy, I'm Tres :-)

Image

User avatar
treswright
Posts: 6045
Joined: Mon May 25, 2015 4:11 am
Location: Dallas, TX
Contact:

Re: Transferring Stickers

Postby treswright » Fri Sep 16, 2016 9:21 am

meangene wrote:I think I'm going to try this one just for fun lol :compress:


Absolutely lol That's actually how I've learned 90% of my modeling and building techniques, experimenting with stuff I don't care about first just to see what happens :-)
Howdy, I'm Tres :-)

Image

User avatar
booboo79
Collector of the Month
Collector of the Month
Posts: 1159
Joined: Sat Oct 10, 2015 2:39 pm
Location: New York, NY
Contact:

Re: Transferring Stickers

Postby booboo79 » Fri Sep 16, 2016 10:02 am

treswright wrote:
booboo79 wrote:Is there a specific brand of spray adhesive you prefer to use and where can it be purchased? Thanks in advance!


Sure, no problem! I get the 3M stuff from Walmart, it's this:

https://www.walmart.com/ip/19412027?wml ... 3=&veh=sem

It's not cheap but a can lasts a long time. I use it a lot for the scenes and dioramas I make to glue paper to foam core. I've also used it to glue photos to paper, for kid's school projects, even to glue vintage trading cards back onto loose backings.

If you're gluing something like these box stickers, then place the sticker face down on a scrap piece of paper or cardboard. Use a toothpick to hold it down so it doesn't blow away when you spray it (from the can pressure). Hold the can about 10" away and just hit it with a quick burst. Let the glue "tack up" for a minute or so and then put the sticker in place.

Do this outdoors or in your garage because the stuff does have an odor.

After you're done, turn the can upside down, point it into a trash can or out into the yard or something and spray until nothing but air comes out. This clears the nozzle so you can use it again and again and again :-) I do this for spray paint too. Works great. I have cans that are many years old that I still use.


Oh man, this is SO SO helpful!! Thanks so much, Tres!
Hi, I'm Charlie!
Instagram: @CharlieRestreps


Image Image Image Image Image


anm00727
Posts: 423
Joined: Sat Jan 16, 2016 11:36 pm
Location: CanEHda
Contact:

Re: Transferring Stickers

Postby anm00727 » Fri Sep 16, 2016 10:51 am

booboo79 wrote:
treswright wrote:
anm00727 wrote:You should apply the sticker on the new box right away, and it should be gravy.

If by chance it loses its adhesive Ness, you can buy a can of spray adhesive and do a light coat on the sticker (at the sticky part obviousyl)


I've used spray adhesive before on stickers that fell off the boxes. Works great.


Is there a specific brand of spray adhesive you prefer to use and where can it be purchased? Thanks in advance!


No preferred brand, since I have only used 1 can so far (these last quite a white). The one I used is Krylon, though I assume others work well too like 3M
IG: funko.max
Started collecting: Jan 01, 2016
POP!s: 350

Fundays: 2018

ISO:
- Pops: Freddy Boba Fett [LE24], Freddy Clone Trooper [LE12]
- Minis: Lurtz, Eowen, Witch King, Nazgul, Gimli
- Wobblers: LOTR/Hobbit

User avatar
treswright
Posts: 6045
Joined: Mon May 25, 2015 4:11 am
Location: Dallas, TX
Contact:

Re: Transferring Stickers

Postby treswright » Fri Sep 16, 2016 10:54 am

booboo79 wrote:Oh man, this is SO SO helpful!! Thanks so much, Tres!


You're very welcome! :-)
Howdy, I'm Tres :-)

Image

User avatar
brooklyn_geek
Posts: 2134
Joined: Thu Jun 18, 2015 11:24 pm
Location: Brooklyn, NY of Course!
Contact:

Re: Transferring Stickers

Postby brooklyn_geek » Mon Oct 17, 2016 10:13 pm

I'm going to have to experiment and try this...I have a couple of loose stickers I wanna move

ditbu13oi
Posts: 242
Joined: Wed Jan 06, 2016 12:00 pm
Location: Bay Area
Contact:

Re: Transferring Stickers

Postby ditbu13oi » Wed Oct 19, 2016 1:01 am

treswright wrote:
booboo79 wrote:Is there a specific brand of spray adhesive you prefer to use and where can it be purchased? Thanks in advance!


Sure, no problem! I get the 3M stuff from Walmart, it's this:

https://www.walmart.com/ip/19412027?wml ... 3=&veh=sem

It's not cheap but a can lasts a long time. I use it a lot for the scenes and dioramas I make to glue paper to foam core. I've also used it to glue photos to paper, for kid's school projects, even to glue vintage trading cards back onto loose backings.

If you're gluing something like these box stickers, then place the sticker face down on a scrap piece of paper or cardboard. Use a toothpick to hold it down so it doesn't blow away when you spray it (from the can pressure). Hold the can about 10" away and just hit it with a quick burst. Let the glue "tack up" for a minute or so and then put the sticker in place.

Do this outdoors or in your garage because the stuff does have an odor.

After you're done, turn the can upside down, point it into a trash can or out into the yard or something and spray until nothing but air comes out. This clears the nozzle so you can use it again and again and again :-) I do this for spray paint too. Works great. I have cans that are many years old that I still use.


Very useful information. Thanks for the tip!

User avatar
TriFeckTa
Posts: 2706
Joined: Tue Sep 20, 2016 3:11 pm
Location: Little Saigon, California
Contact:

Re: Transferring Stickers

Postby TriFeckTa » Thu Oct 20, 2016 8:44 am

i Need start using spray adhesive lol. I always used a gluestick and it works, but i imagine spray adhesive would work better.
Hey there, I'm Michael and I am an Iron Man Junkie!
Iron Man POP! Collection (Production Pieces): COMPLETE
Iron Man Proto Count: 50
Iron Man Wacky Wobblers: IN PROGRESS

ISO: Gold Mark 2 Iron Man CHASE Wobbler, Gold Mark 1 Iron Man CHASE Wobbler, Gold and Silver 1/12 Freddy Stark Wobblers, and IRON MAN RELATED PROTOS

Check out my IG: @triifeckta
ImageImage


Return to “Pop!”

Who is online

Users browsing this forum: Google [Bot]