Transferring Stickers
Forum rules
This section is for general Pop discussion, not showing off your recent acquisitions. Please use the Dance Hall for collection addition pictures.
Please post Funko subscription box and item discussions in the Powered By Funko section.
This section is for general Pop discussion, not showing off your recent acquisitions. Please use the Dance Hall for collection addition pictures.
Please post Funko subscription box and item discussions in the Powered By Funko section.
-
rdgmjv11
- Posts: 603
- Joined: Sun Sep 07, 2014 12:45 pm
Transferring Stickers
Just ordered a Duck Dodgers Chase from BigBadToys.com. Just in case my box comes damaged, I plan to swap boxes with my standard Duck Dodgers box. My question is - how do I swap out the sticker, step by step? I've seen discussions of people doing it, but want to know exactly how to go about doing so for my own records.
Thanks!
Thanks!
399 POPs and counting...
My Collection: http://www.poppriceguide.com/guide/member/collection/rdgmjv11/3HWTZ8ZV4OQFKAH8/
Grails Needed: The Grady Twins (The Shining)
My Collection: http://www.poppriceguide.com/guide/member/collection/rdgmjv11/3HWTZ8ZV4OQFKAH8/
Grails Needed: The Grady Twins (The Shining)
-
anm00727
- Posts: 423
- Joined: Sat Jan 16, 2016 11:36 pm
- Location: CanEHda
- Contact:
Re: Transferring Stickers
I use a hairdryer on medium or low to heat up the sticker. Peel off sticker delicately, possibly using an exact to lift it up initially.
IG: funko.max
Started collecting: Jan 01, 2016
POP!s: 350
Fundays: 2018
ISO:
- Pops: Freddy Boba Fett [LE24], Freddy Clone Trooper [LE12]
- Minis: Lurtz, Eowen, Witch King, Nazgul, Gimli
- Wobblers: LOTR/Hobbit
Started collecting: Jan 01, 2016
POP!s: 350
Fundays: 2018
ISO:
- Pops: Freddy Boba Fett [LE24], Freddy Clone Trooper [LE12]
- Minis: Lurtz, Eowen, Witch King, Nazgul, Gimli
- Wobblers: LOTR/Hobbit
-
rdgmjv11
- Posts: 603
- Joined: Sun Sep 07, 2014 12:45 pm
Re: Transferring Stickers
anm00727 wrote:I use a hairdryer on medium or low to heat up the sticker. Peel off sticker delicately, possibly using an exact to lift it up initially.
Would a box cutter work, for peeling it off?
And I imagine applying it to the new box is as simple as placing it in the correct spot?
399 POPs and counting...
My Collection: http://www.poppriceguide.com/guide/member/collection/rdgmjv11/3HWTZ8ZV4OQFKAH8/
Grails Needed: The Grady Twins (The Shining)
My Collection: http://www.poppriceguide.com/guide/member/collection/rdgmjv11/3HWTZ8ZV4OQFKAH8/
Grails Needed: The Grady Twins (The Shining)
- nyel24
- Posts: 1150
- Joined: Thu May 08, 2014 5:47 pm
-
rdgmjv11
- Posts: 603
- Joined: Sun Sep 07, 2014 12:45 pm
Re: Transferring Stickers
nyel24 wrote:i probably wouldn't use a box cutter to peel it off.
I mean after using the hair dryer. Sorry, should've been more specific.
399 POPs and counting...
My Collection: http://www.poppriceguide.com/guide/member/collection/rdgmjv11/3HWTZ8ZV4OQFKAH8/
Grails Needed: The Grady Twins (The Shining)
My Collection: http://www.poppriceguide.com/guide/member/collection/rdgmjv11/3HWTZ8ZV4OQFKAH8/
Grails Needed: The Grady Twins (The Shining)
- Sarcasticguy
- Hall of Fame Class of 2023

- Posts: 4535
- Joined: Tue Aug 11, 2015 6:07 pm
- Location: Phoenix, Arizona
- Contact:
Re: Transferring Stickers
Definitely use a hair dryer to loosen the glue, then maybe a pair of tweezers or an exacto knife to get under the sticker and lift it off.
Hi, I'm Scott.
Instagram: @Sarcasticguy89

ISO:
Any Fallout Protos
Aliens Ellen Ripley Rock Candy Proto
Furiosa and Normal Immortan Joe Protos
SDCC '13 Bloody Predator Pop!
Retro Freddy Thor | Retro Freddy Skeletor
Instagram: @Sarcasticguy89

ISO:
Any Fallout Protos
Aliens Ellen Ripley Rock Candy Proto
Furiosa and Normal Immortan Joe Protos
SDCC '13 Bloody Predator Pop!
Retro Freddy Thor | Retro Freddy Skeletor
-
rdgmjv11
- Posts: 603
- Joined: Sun Sep 07, 2014 12:45 pm
Re: Transferring Stickers
Sarcasticguy wrote:Definitely use a hair dryer to loosen the glue, then maybe a pair of tweezers or an exacto knife to get under the sticker and lift it off.
Perfect. I can do that.
About how long, for the hair dryer? And do I need to "glue" the sticker back to the new box, or will there still be enough adhesive for it to stick?
399 POPs and counting...
My Collection: http://www.poppriceguide.com/guide/member/collection/rdgmjv11/3HWTZ8ZV4OQFKAH8/
Grails Needed: The Grady Twins (The Shining)
My Collection: http://www.poppriceguide.com/guide/member/collection/rdgmjv11/3HWTZ8ZV4OQFKAH8/
Grails Needed: The Grady Twins (The Shining)
- meangene
- HoF 2020 & CotM

- Posts: 880
- Joined: Thu Jun 06, 2013 9:07 pm
- Location: Orlando
- Contact:
Re: Transferring Stickers
Just use a hairdryer and peel it off carefully. You shouldn't use a box cutter. Good luck!
Gene
___________________________________________
Instagram meangene924
___________________________________________
Instagram meangene924
-
anm00727
- Posts: 423
- Joined: Sat Jan 16, 2016 11:36 pm
- Location: CanEHda
- Contact:
Re: Transferring Stickers
You should apply the sticker on the new box right away, and it should be gravy.
If by chance it loses its adhesive Ness, you can buy a can of spray adhesive and do a light coat on the sticker (at the sticky part obviousyl)
If by chance it loses its adhesive Ness, you can buy a can of spray adhesive and do a light coat on the sticker (at the sticky part obviousyl)
IG: funko.max
Started collecting: Jan 01, 2016
POP!s: 350
Fundays: 2018
ISO:
- Pops: Freddy Boba Fett [LE24], Freddy Clone Trooper [LE12]
- Minis: Lurtz, Eowen, Witch King, Nazgul, Gimli
- Wobblers: LOTR/Hobbit
Started collecting: Jan 01, 2016
POP!s: 350
Fundays: 2018
ISO:
- Pops: Freddy Boba Fett [LE24], Freddy Clone Trooper [LE12]
- Minis: Lurtz, Eowen, Witch King, Nazgul, Gimli
- Wobblers: LOTR/Hobbit
-
rdgmjv11
- Posts: 603
- Joined: Sun Sep 07, 2014 12:45 pm
Re: Transferring Stickers
anm00727 wrote:You should apply the sticker on the new box right away, and it should be gravy.
If by chance it loses its adhesive Ness, you can buy a can of spray adhesive and do a light coat on the sticker (at the sticky part obviousyl)
Great. Thanks!
399 POPs and counting...
My Collection: http://www.poppriceguide.com/guide/member/collection/rdgmjv11/3HWTZ8ZV4OQFKAH8/
Grails Needed: The Grady Twins (The Shining)
My Collection: http://www.poppriceguide.com/guide/member/collection/rdgmjv11/3HWTZ8ZV4OQFKAH8/
Grails Needed: The Grady Twins (The Shining)
- treswright
- Posts: 6045
- Joined: Mon May 25, 2015 4:11 am
- Location: Dallas, TX
- Contact:
Re: Transferring Stickers
anm00727 wrote:You should apply the sticker on the new box right away, and it should be gravy.
If by chance it loses its adhesive Ness, you can buy a can of spray adhesive and do a light coat on the sticker (at the sticky part obviousyl)
I've used spray adhesive before on stickers that fell off the boxes. Works great.
Howdy, I'm Tres 


-
snapcracklePOP
- Posts: 10
- Joined: Fri Jan 29, 2016 12:53 pm
Re: Transferring Stickers
When I've had trouble with stickers, I've even just swapped out the whole window. A little more work, but pretty clean.
-
rdgmjv11
- Posts: 603
- Joined: Sun Sep 07, 2014 12:45 pm
Re: Transferring Stickers
snapcracklePOP wrote:When I've had trouble with stickers, I've even just swapped out the whole window. A little more work, but pretty clean.
How do you go about doing that?
399 POPs and counting...
My Collection: http://www.poppriceguide.com/guide/member/collection/rdgmjv11/3HWTZ8ZV4OQFKAH8/
Grails Needed: The Grady Twins (The Shining)
My Collection: http://www.poppriceguide.com/guide/member/collection/rdgmjv11/3HWTZ8ZV4OQFKAH8/
Grails Needed: The Grady Twins (The Shining)
-
snapcracklePOP
- Posts: 10
- Joined: Fri Jan 29, 2016 12:53 pm
Re: Transferring Stickers
The few times I've done it, I used a razor blade on the inside of the window seam to separate the glue or you carefully peel them apart from one another. To put a new one on is a little more tricky, you can use double sided tape or super glue and go around the edges of the window or box to ensure they aren't visible and squeeze between your fingers until secure.
I'm definitely a fan of removing the sticker first over the whole window method, but its really nice when you also have a damaged window.
I'm definitely a fan of removing the sticker first over the whole window method, but its really nice when you also have a damaged window.
- Hopesdenial
- Posts: 1428
- Joined: Wed May 30, 2012 11:59 pm
Re: Transferring Stickers
Definitely a scary situation. If your nail is long enough, I suppose you can do that to lift the sticker after heating.

"We come to this place for magic. We come to funkofunatic.com to laugh, to cry, to care. Because we need that, all of us."
Board name origin - I was an emo singer and guitarist; I'm not trying to sound mean
- treswright
- Posts: 6045
- Joined: Mon May 25, 2015 4:11 am
- Location: Dallas, TX
- Contact:
Re: Transferring Stickers
snapcracklePOP wrote:The few times I've done it, I used a razor blade on the inside of the window seam to separate the glue or you carefully peel them apart from one another. To put a new one on is a little more tricky, you can use double sided tape or super glue and go around the edges of the window or box to ensure they aren't visible and squeeze between your fingers until secure.
I'm definitely a fan of removing the sticker first over the whole window method, but its really nice when you also have a damaged window.
Put the whole box in the freezer for an hour and the window will pop right out of the box.
Howdy, I'm Tres 


- booboo79
- Collector of the Month

- Posts: 1159
- Joined: Sat Oct 10, 2015 2:39 pm
- Location: New York, NY
- Contact:
Re: Transferring Stickers
treswright wrote:anm00727 wrote:You should apply the sticker on the new box right away, and it should be gravy.
If by chance it loses its adhesive Ness, you can buy a can of spray adhesive and do a light coat on the sticker (at the sticky part obviousyl)
I've used spray adhesive before on stickers that fell off the boxes. Works great.
Is there a specific brand of spray adhesive you prefer to use and where can it be purchased? Thanks in advance!
Hi, I'm Charlie!
Instagram: @CharlieRestreps

Instagram: @CharlieRestreps

- meangene
- HoF 2020 & CotM

- Posts: 880
- Joined: Thu Jun 06, 2013 9:07 pm
- Location: Orlando
- Contact:
Re: Transferring Stickers
treswright wrote:snapcracklePOP wrote:The few times I've done it, I used a razor blade on the inside of the window seam to separate the glue or you carefully peel them apart from one another. To put a new one on is a little more tricky, you can use double sided tape or super glue and go around the edges of the window or box to ensure they aren't visible and squeeze between your fingers until secure.
I'm definitely a fan of removing the sticker first over the whole window method, but its really nice when you also have a damaged window.
Put the whole box in the freezer for an hour and the window will pop right out of the box.
I think I'm going to try this one just for fun
Gene
___________________________________________
Instagram meangene924
___________________________________________
Instagram meangene924
- treswright
- Posts: 6045
- Joined: Mon May 25, 2015 4:11 am
- Location: Dallas, TX
- Contact:
Re: Transferring Stickers
booboo79 wrote:Is there a specific brand of spray adhesive you prefer to use and where can it be purchased? Thanks in advance!
Sure, no problem! I get the 3M stuff from Walmart, it's this:
https://www.walmart.com/ip/19412027?wml ... 3=&veh=sem
It's not cheap but a can lasts a long time. I use it a lot for the scenes and dioramas I make to glue paper to foam core. I've also used it to glue photos to paper, for kid's school projects, even to glue vintage trading cards back onto loose backings.
If you're gluing something like these box stickers, then place the sticker face down on a scrap piece of paper or cardboard. Use a toothpick to hold it down so it doesn't blow away when you spray it (from the can pressure). Hold the can about 10" away and just hit it with a quick burst. Let the glue "tack up" for a minute or so and then put the sticker in place.
Do this outdoors or in your garage because the stuff does have an odor.
After you're done, turn the can upside down, point it into a trash can or out into the yard or something and spray until nothing but air comes out. This clears the nozzle so you can use it again and again and again
I do this for spray paint too. Works great. I have cans that are many years old that I still use.Howdy, I'm Tres 


- treswright
- Posts: 6045
- Joined: Mon May 25, 2015 4:11 am
- Location: Dallas, TX
- Contact:
Re: Transferring Stickers
meangene wrote:I think I'm going to try this one just for fun![]()
Absolutely

Howdy, I'm Tres 


- booboo79
- Collector of the Month

- Posts: 1159
- Joined: Sat Oct 10, 2015 2:39 pm
- Location: New York, NY
- Contact:
Re: Transferring Stickers
treswright wrote:booboo79 wrote:Is there a specific brand of spray adhesive you prefer to use and where can it be purchased? Thanks in advance!
Sure, no problem! I get the 3M stuff from Walmart, it's this:
https://www.walmart.com/ip/19412027?wml ... 3=&veh=sem
It's not cheap but a can lasts a long time. I use it a lot for the scenes and dioramas I make to glue paper to foam core. I've also used it to glue photos to paper, for kid's school projects, even to glue vintage trading cards back onto loose backings.
If you're gluing something like these box stickers, then place the sticker face down on a scrap piece of paper or cardboard. Use a toothpick to hold it down so it doesn't blow away when you spray it (from the can pressure). Hold the can about 10" away and just hit it with a quick burst. Let the glue "tack up" for a minute or so and then put the sticker in place.
Do this outdoors or in your garage because the stuff does have an odor.
After you're done, turn the can upside down, point it into a trash can or out into the yard or something and spray until nothing but air comes out. This clears the nozzle so you can use it again and again and againI do this for spray paint too. Works great. I have cans that are many years old that I still use.
Oh man, this is SO SO helpful!! Thanks so much, Tres!
Hi, I'm Charlie!
Instagram: @CharlieRestreps

Instagram: @CharlieRestreps

-
anm00727
- Posts: 423
- Joined: Sat Jan 16, 2016 11:36 pm
- Location: CanEHda
- Contact:
Re: Transferring Stickers
booboo79 wrote:treswright wrote:anm00727 wrote:You should apply the sticker on the new box right away, and it should be gravy.
If by chance it loses its adhesive Ness, you can buy a can of spray adhesive and do a light coat on the sticker (at the sticky part obviousyl)
I've used spray adhesive before on stickers that fell off the boxes. Works great.
Is there a specific brand of spray adhesive you prefer to use and where can it be purchased? Thanks in advance!
No preferred brand, since I have only used 1 can so far (these last quite a white). The one I used is Krylon, though I assume others work well too like 3M
IG: funko.max
Started collecting: Jan 01, 2016
POP!s: 350
Fundays: 2018
ISO:
- Pops: Freddy Boba Fett [LE24], Freddy Clone Trooper [LE12]
- Minis: Lurtz, Eowen, Witch King, Nazgul, Gimli
- Wobblers: LOTR/Hobbit
Started collecting: Jan 01, 2016
POP!s: 350
Fundays: 2018
ISO:
- Pops: Freddy Boba Fett [LE24], Freddy Clone Trooper [LE12]
- Minis: Lurtz, Eowen, Witch King, Nazgul, Gimli
- Wobblers: LOTR/Hobbit
- treswright
- Posts: 6045
- Joined: Mon May 25, 2015 4:11 am
- Location: Dallas, TX
- Contact:
Re: Transferring Stickers
booboo79 wrote:Oh man, this is SO SO helpful!! Thanks so much, Tres!
You're very welcome!

Howdy, I'm Tres 


- brooklyn_geek
- Posts: 2134
- Joined: Thu Jun 18, 2015 11:24 pm
- Location: Brooklyn, NY of Course!
- Contact:
Re: Transferring Stickers
I'm going to have to experiment and try this...I have a couple of loose stickers I wanna move
-
ditbu13oi
- Posts: 242
- Joined: Wed Jan 06, 2016 12:00 pm
- Location: Bay Area
- Contact:
Re: Transferring Stickers
treswright wrote:booboo79 wrote:Is there a specific brand of spray adhesive you prefer to use and where can it be purchased? Thanks in advance!
Sure, no problem! I get the 3M stuff from Walmart, it's this:
https://www.walmart.com/ip/19412027?wml ... 3=&veh=sem
It's not cheap but a can lasts a long time. I use it a lot for the scenes and dioramas I make to glue paper to foam core. I've also used it to glue photos to paper, for kid's school projects, even to glue vintage trading cards back onto loose backings.
If you're gluing something like these box stickers, then place the sticker face down on a scrap piece of paper or cardboard. Use a toothpick to hold it down so it doesn't blow away when you spray it (from the can pressure). Hold the can about 10" away and just hit it with a quick burst. Let the glue "tack up" for a minute or so and then put the sticker in place.
Do this outdoors or in your garage because the stuff does have an odor.
After you're done, turn the can upside down, point it into a trash can or out into the yard or something and spray until nothing but air comes out. This clears the nozzle so you can use it again and again and againI do this for spray paint too. Works great. I have cans that are many years old that I still use.
Very useful information. Thanks for the tip!
- TriFeckTa
- Posts: 2706
- Joined: Tue Sep 20, 2016 3:11 pm
- Location: Little Saigon, California
- Contact:
Re: Transferring Stickers
i Need start using spray adhesive
. I always used a gluestick and it works, but i imagine spray adhesive would work better.
Hey there, I'm Michael and I am an Iron Man Junkie!
Iron Man POP! Collection (Production Pieces): COMPLETE
Iron Man Proto Count: 50
Iron Man Wacky Wobblers: IN PROGRESS
ISO: Gold Mark 2 Iron Man CHASE Wobbler, Gold Mark 1 Iron Man CHASE Wobbler, Gold and Silver 1/12 Freddy Stark Wobblers, and IRON MAN RELATED PROTOS
Check out my IG: @triifeckta


Iron Man POP! Collection (Production Pieces): COMPLETE
Iron Man Proto Count: 50
Iron Man Wacky Wobblers: IN PROGRESS
ISO: Gold Mark 2 Iron Man CHASE Wobbler, Gold Mark 1 Iron Man CHASE Wobbler, Gold and Silver 1/12 Freddy Stark Wobblers, and IRON MAN RELATED PROTOS
Check out my IG: @triifeckta


Who is online
Users browsing this forum: No registered users
