Box separated at the seam

It don't mean a thing if it ain't got a spring. Come inside and chat about Funko Wacky Wobblers (bobble heads, for the less sophisticated).
User avatar
ahaubert80
Posts: 732
Joined: Sat May 24, 2014 2:16 am
Location: Columbus, OH

Box separated at the seam

Postby ahaubert80 » Wed Jul 02, 2014 6:20 pm

So today I received my first Wacky Wobbler in the mail
13791

Everything looks great except the box has separated at the seam.

1379413795

The eBay seller listed him as being in perfect condition with the box in mint condition as well. The figure looks great and the box is in great shape other than the split seam. I got a great deal on him so I don't plan on raising too big of a fuss over it and I'm going to keep him.

I think it should be fine to just run a small line of glue across the split seam and everything should patch up fine, right? Is there any particular brand of glue that works best for this kind of repair? Also, any idea about what that writing says?
My name is Andrew and I have a Pop addiction.

Hoping to find a Bloody Chase variant Leatherface Pop to complete my Horror Chases.

Pop Count: 150

User avatar
kevintree
Hall of Fame Class of 2020
Hall of Fame Class of 2020
Posts: 1822
Joined: Fri Jan 18, 2013 2:23 pm
Location: California, USA

Re: Box separated at the seam

Postby kevintree » Wed Jul 02, 2014 6:23 pm

That's happened to one of my POP! boxes before. I just used a thin line of Elmer's all-purpose glue and put a book on it
kevin/tree
instagram.com/funkotree

kevinbuddha
Hall of Fame Class of 2007
Hall of Fame Class of 2007
Posts: 9418
Joined: Mon Apr 28, 2003 11:06 am
Location: Minnesota-where Sleestaks run free!

Re: Box separated at the seam

Postby kevinbuddha » Wed Jul 02, 2014 6:25 pm

Glue is good on the boxes!
Minnesota.....where the Sleestaks & Pakuni run free!

Funko's Official Historian

User avatar
gruppetstudios
Posts: 2055
Joined: Sun Nov 18, 2012 1:54 pm
Location: New Hampshire

Re: Box separated at the seam

Postby gruppetstudios » Wed Jul 02, 2014 6:55 pm

Burn it
I'm the Gruppeteer! I host Cartoons VS Cancer! I like Pokemon a LOT!
Image
(The portraits in the top left and right corners were done by Rob Renzetti and Mr. Warburton respectively!)

User avatar
MadLove
HoF 2019 & CotM
HoF 2019 & CotM
Posts: 3644
Joined: Wed Aug 22, 2012 6:47 pm
Location: Seattle, WA
Contact:

Re: Box separated at the seam

Postby MadLove » Wed Jul 02, 2014 7:12 pm

Double sided tape.
Image
They/Them
ISO PROTOS: Labyrinth Jareth w/ riding crop, Harley Bombshell Rock Candy and David from The Lost Boys Mystery Mini.

User avatar
Funko Pop! Fan16
Posts: 4125
Joined: Fri Feb 15, 2013 9:29 am
Location: Bean Station, TN

Re: Box separated at the seam

Postby Funko Pop! Fan16 » Wed Jul 02, 2014 7:15 pm

Sorry to see that Andrew, I would use a Claire said, double sided tape.
I would use glue, but if your like me, you would get it everywhere.
Jonathan is HERE!
ImageImageImageImage

User avatar
ahaubert80
Posts: 732
Joined: Sat May 24, 2014 2:16 am
Location: Columbus, OH

Re: Box separated at the seam

Postby ahaubert80 » Wed Jul 02, 2014 7:55 pm

I was actually thinking of the best type of glue to use. I am not afraid to get myself a little messy and I've had great results by putting the glue on my fingers or the tips of razor blades for proper application on some previous art projects. Double sided tape could work too, but it would be impossible to call the box "near mint" if there was tape on the box instead of glue.
My name is Andrew and I have a Pop addiction.

Hoping to find a Bloody Chase variant Leatherface Pop to complete my Horror Chases.

Pop Count: 150

edorice
Hall of Fame Class of 2015
Hall of Fame Class of 2015
Posts: 7104
Joined: Tue Jan 24, 2012 3:54 pm

Re: Box separated at the seam

Postby edorice » Wed Jul 02, 2014 8:02 pm

Just glue it.

User avatar
TulaBug
Posts: 8369
Joined: Thu Sep 06, 2012 7:51 pm
Location: MD

Re: Box separated at the seam

Postby TulaBug » Wed Jul 02, 2014 8:04 pm

I use rubber cement. I put a little bit on each side and let it dry a minute until it is just tacky. Then seal it back together. Someone who majored in Graphic Design taught me that trick.
Stacey

SPIRIT AWARD 2013

User avatar
lovetheangels
Hall of Fame Class of 2010
Hall of Fame Class of 2010
Posts: 2877
Joined: Mon Jul 24, 2006 11:57 pm
Location: Southern Cali

Re: Box separated at the seam

Postby lovetheangels » Wed Jul 02, 2014 8:06 pm

Use the small hot glue gun. I had that happen a bunch of times. You can get a cheap small glue gun at Walmart. It heats up and falls right into place really well. Easy peasy
Ken here
Image

Bills83
Posts: 192
Joined: Sun Sep 30, 2012 3:44 pm
Location: Utah

Re: Box separated at the seam

Postby Bills83 » Wed Jul 02, 2014 8:12 pm

Defective box!? Put that on ebay for $300.00!!!
4355
Hi I'm Zak!!

User avatar
Scotty
HOF 2026 + ROTY
HOF 2026 + ROTY
Posts: 3117
Joined: Thu Aug 09, 2012 2:41 pm
Location: Baltimore, MD

Re: Box separated at the seam

Postby Scotty » Wed Jul 02, 2014 10:16 pm

Rubber cement is my preferred glue for paper/cardboard. The way Stacey described it is the best way to LOCK it together--it's called dry mounting. Be very careful. When you let the glue dry (on both sides) and then touch it together, it locks in place almost immediately--that is, no sliding it around to get into position. The way we used to do this was let the glue dry, then put a piece of tracing paper between the two pieces being glued together; then line up the pieces and slide the tracing paper out. If you're worried about screwing it up, just don't let the glue dry before pressing it together.

If you want more info on this (like this wasn't already too much) just shoot me a PM.
Image Image
2013 Rookie of the Year - COTM May 2014 - HOF Class of 2026

User avatar
TulaBug
Posts: 8369
Joined: Thu Sep 06, 2012 7:51 pm
Location: MD

Re: Box separated at the seam

Postby TulaBug » Wed Jul 02, 2014 10:29 pm

Scotty wrote:Rubber cement is my preferred glue for paper/cardboard. The way Stacey described it is the best way to LOCK it together--it's called dry mounting. Be very careful. When you let the glue dry (on both sides) and then touch it together, it locks in place almost immediately--that is, no sliding it around to get into position. The way we used to do this was let the glue dry, then put a piece of tracing paper between the two pieces being glued together; then line up the pieces and slide the tracing paper out. If you're worried about screwing it up, just don't let the glue dry before pressing it together.

If you want more info on this (like this wasn't already too much) just shoot me a PM.

Hey, aren't you the guy who taught me that trick?
Stacey

SPIRIT AWARD 2013

User avatar
jake1977jr
Posts: 1273
Joined: Sat Mar 24, 2012 11:08 pm
Location: Fayetteville,Pennsylvania

Re: Box separated at the seam

Postby jake1977jr » Wed Jul 02, 2014 11:33 pm

I have so many Pop boxes that are like that.I think they use cheap glue from the factory to be honest.I just run a small thin line of super glue down my boxes,and then they never come apart again.

User avatar
arisensun
Posts: 354
Joined: Tue Jan 14, 2014 8:40 am

Re: Box separated at the seam

Postby arisensun » Thu Jul 03, 2014 12:18 am

I had to repair Greedo and I used rubber cement mixture.
Image

User avatar
mindblowin02
Hall of Fame Class of 2012
Hall of Fame Class of 2012
Posts: 5009
Joined: Sun Jan 06, 2008 7:28 pm
Location: socal
Contact:

Re: Box separated at the seam

Postby mindblowin02 » Thu Jul 03, 2014 11:34 pm

Superglue with the brush tip works like a charm

User avatar
agentaa
Posts: 661
Joined: Tue Jan 01, 2013 5:21 pm
Location: Salt Lake City, UT
Contact:

Re: Box separated at the seam

Postby agentaa » Thu Jul 03, 2014 11:46 pm

I used gorilla glue on one of my boxes just two little dots and it's like brand new!
Austin SW8 My YouTube channel is AgentAA Toys
Image

User avatar
ahaubert80
Posts: 732
Joined: Sat May 24, 2014 2:16 am
Location: Columbus, OH

Re: Box separated at the seam

Postby ahaubert80 » Thu Jul 03, 2014 11:55 pm

Thanks for the tips everyone!
My name is Andrew and I have a Pop addiction.

Hoping to find a Bloody Chase variant Leatherface Pop to complete my Horror Chases.

Pop Count: 150

User avatar
TulaBug
Posts: 8369
Joined: Thu Sep 06, 2012 7:51 pm
Location: MD

Re: Box separated at the seam

Postby TulaBug » Fri Jul 04, 2014 1:32 am

ahaubert80 wrote:Thanks for the tips everyone!


Tell us what you end up doing. I'm curious since you have so many choices. lol
Stacey

SPIRIT AWARD 2013

DisneyDork123

Re: Box separated at the seam

Postby DisneyDork123 » Fri Jul 04, 2014 2:12 am

Yup, I'd use a hot glue gun. Good luck!

User avatar
bobbleboy
Hall of Fame Class of 2008
Hall of Fame Class of 2008
Posts: 2495
Joined: Sat Jul 12, 2003 8:38 pm
Location: San Francisco, CA
Contact:

Re: Box separated at the seam

Postby bobbleboy » Sun Jul 06, 2014 10:50 pm

gruppetstudios wrote:Burn it


I'm with this guy. :roflmao:

kevinbuddha
Hall of Fame Class of 2007
Hall of Fame Class of 2007
Posts: 9418
Joined: Mon Apr 28, 2003 11:06 am
Location: Minnesota-where Sleestaks run free!

Re: Box separated at the seam

Postby kevinbuddha » Sun Jul 06, 2014 11:35 pm

agentaa wrote:I used gorilla glue on one of my boxes just two little dots and it's like brand new!


I use gorilla glue also.
Minnesota.....where the Sleestaks & Pakuni run free!

Funko's Official Historian


Return to “Wacky Wobblers”

Who is online

Users browsing this forum: Baidu [Spider]