40" Freddy question
- itchykorean
- Hall of Fame Class of 2005

- Posts: 2424
- Joined: Sat Apr 26, 2003 2:36 pm
- Location: H-Town, Home Of The 2x MLB CHAMPS!
- Contact:
40" Freddy question
Anyone having problems with the big fella? The right shoe on my Freddy seems to be caving in on the top (where the shoe meets his pants). Freddy won't stand up straight anymore. If at all. :cry: Must be his giant, heavy head of his.
Original Funko FunKlub Member 0004
Hall Of Fame Class 2005 - #5
Hall Of Fame Class 2005 - #5
- jarkbark
- Hall of Fame Class of 2008

- Posts: 1326
- Joined: Sat Apr 26, 2003 8:31 am
- Location: Chicago
-
SIKE_O
-
THEGODBEAST
Re: 40" Freddy question
itchykorean wrote:Anyone having problems with the big fella? The right shoe on my Freddy seems to be caving in on the top (where the shoe meets his pants). Freddy won't stand up straight anymore. If at all. :cry: Must be his giant, heavy head of his.
That SUCKS! :cry: :cry: :cry: That is a TON of $ for a giant wobbler that won't stand. :cry: :cry: :cry: I bet if you lived in Alaska it might not be warping from the wieght. :? I am sure it is the climate of TX that is making it warp or at I guess the sheer wieght.
I hope Funko can figure out how to fix the problem or at least replace it or refund your $$$.
TGB
-
TEXASWOBBLER
- FFJim
- HoF 2007 & CotY

- Posts: 3024
- Joined: Tue Aug 24, 2004 11:19 am
- Location: Michigan
Oh no, not again!
I ordered a 33" USS Enterprise model from Unobtainium LTD a few years ago. Shortly after they started shipping the models, customers started reporting issues with sagging, so the company halted shipments to investigate.
Over a year later, after constant reassurances that a solution had been found, they went belly up, leaving many collectors out over $1200 each for models they never received or with models that were drooping.
That was a lot more dramatic case, of course, but I don't want my $350 Freddy to start sagging. He's way too young for that!
I ordered a 33" USS Enterprise model from Unobtainium LTD a few years ago. Shortly after they started shipping the models, customers started reporting issues with sagging, so the company halted shipments to investigate.
Over a year later, after constant reassurances that a solution had been found, they went belly up, leaving many collectors out over $1200 each for models they never received or with models that were drooping.
That was a lot more dramatic case, of course, but I don't want my $350 Freddy to start sagging. He's way too young for that!
-
Augie
- mrcory5000
- Hall of Fame Class of 2006

- Posts: 3741
- Joined: Sun Apr 27, 2003 8:08 pm
- Location: House of 5000
- Contact:
I feel your pain, Itchy. For the past couple months my Freddy looked like it was leaning forward, but it was so gradual, I wasn't really sure. Then 2 weekends ago I heard a loud noise coming from the living room, and once I went out to see what the noise was all about, I found Freddy on the floor with his head several feet away from his body. I put him back together, but because of his forward lean, and warped feet, he has been facing the wall with a towel seperating his head and the wall. I talked to Shawn over at Funko, and he recommended I lay him outside on a warm day on a towel, so the warmth can revitalize his body. Unfortunately in Minnesota, we have about one warm day each year, so I'll be waiting a while.
-
SIKE_O
Cory use a blow dryer and a little muscle. It is easy as cake, I do it to Wobblers/spastiks all the time. here is what you do. take it either out side or in the bathtub, use the blow dryer (hair dryer) to heat up the plastic at the crease, then when it is soft bend it back. when you have it positioned the way you want pour COLD water over it. either out of the bath tub or garden hose but you must hold it how you want it to stay while the cold water is running over it. It will work like Butter! DO NOT DROP THE BLOW DRYER IN THE WATER, I can not be responsable for such things. The probalem is that over time this will just happen again so a support needs to be made.
-
shannon
-
MyRidesHere
SIKE_O wrote:Cory use a blow dryer and a little muscle. It is easy as cake, I do it to Wobblers/spastiks all the time. here is what you do. take it either out side or in the bathtub, use the blow dryer (hair dryer) to heat up the plastic at the crease, then when it is soft bend it back. when you have it positioned the way you want pour COLD water over it. either out of the bath tub or garden hose but you must hold it how you want it to stay while the cold water is running over it. It will work like Butter! DO NOT DROP THE BLOW DRYER IN THE WATER, I can not be responsable for such things. The probalem is that over time this will just happen again so a support needs to be made.
Last time I tried this I accidentally ripped the base off! :P
Seriously, I am really bummed to be hearing this, so far my freddy seems ok, knock on pvc.
-
netherlands1124
-
netherlands1124
- itchykorean
- Hall of Fame Class of 2005

- Posts: 2424
- Joined: Sat Apr 26, 2003 2:36 pm
- Location: H-Town, Home Of The 2x MLB CHAMPS!
- Contact:
-
wackywobblerdan
- mrcory5000
- Hall of Fame Class of 2006

- Posts: 3741
- Joined: Sun Apr 27, 2003 8:08 pm
- Location: House of 5000
- Contact:
-
SIKE_O
Who is online
Users browsing this forum: No registered users

I forgot about Count Funkula