I did not know that (making a Wobbler)
- FFJim
- HoF 2007 & CotY

- Posts: 3024
- Joined: Tue Aug 24, 2004 11:19 am
- Location: Michigan
I did not know that (making a Wobbler)
Pictured below is the iron-cast mold used to produce Abracadabra heads, which I purchased recently. Although it looks rough on the outside, the inside is finely finished with all the detailing necessary to shape the head.
After looking in the holes on the bottom, I couldn't help but wonder: how the heck does this thing work? There is no way to open the head, so how would you get the plastic out?
I contacted Brian. After a couple of email exchanges, I had the answer. Plastic is poured into the hole. Then, while the plastic is still warm and pliable, it is pulled back out through the hole. So, for a short time, our beloved toys are rubbery plastic. I did not know that! The plastic hardens outside the mold, and you have the piece, ready for the next step.
For anyone who has ever seen a Funko piece sculpted in wax, that's what is used to create castings such as this one. If you have a wax version, you have an unproduced toy, because the wax has to be melted to get it out of the mold.
After looking in the holes on the bottom, I couldn't help but wonder: how the heck does this thing work? There is no way to open the head, so how would you get the plastic out?
I contacted Brian. After a couple of email exchanges, I had the answer. Plastic is poured into the hole. Then, while the plastic is still warm and pliable, it is pulled back out through the hole. So, for a short time, our beloved toys are rubbery plastic. I did not know that! The plastic hardens outside the mold, and you have the piece, ready for the next step.
For anyone who has ever seen a Funko piece sculpted in wax, that's what is used to create castings such as this one. If you have a wax version, you have an unproduced toy, because the wax has to be melted to get it out of the mold.
- icemanfan44
- Collector of the Month

- Posts: 3932
- Joined: Tue Jan 05, 2010 9:59 am
- Location: San Antonio, Texas
Re: I did not know that
what a cool piece to have. I know Grego has some odd production stuff having to do with painting hand painted protos. Its always cool to have a little something from behind the curtain.

They Call me Bear!
COTM 5/12
- funkystark
- Hall of Fame Class of 2011

- Posts: 9641
- Joined: Tue Jan 22, 2008 2:55 pm
- Location: Kitchener, Ontario
Re: I did not know that
Very interesting, thanks for the tidbit Jim.
- Justicewarrior88
- Posts: 1725
- Joined: Mon Apr 09, 2012 1:04 pm
- Location: The stars at night are big and bright, (ClapClapClapClap) Deep in the heart of Texas!
-
dustman94
- Hall of Fame Class of 2011

- Posts: 3575
- Joined: Mon Apr 28, 2008 8:06 pm
- Location: HELL
Re: I did not know that
TO BE HONEST I KNEW THAT, GREAT PIECE JIM
- FunkoH
- Posts: 1073
- Joined: Wed Jul 18, 2012 11:31 pm
- Location: New jersey
Re: I did not know that (making a Wobbler)
Very cool! Tanks for posting. I think we should have a"history" section where people can post about this kind of stuff, and others can look up things
Heili aka FunkoH
- FunkoNewb
- Spirit Award

- Posts: 6018
- Joined: Mon Nov 14, 2011 10:03 pm
- Location: Sacramento, CA
Re: I did not know that (making a Wobbler)
Learning something new every day! Thanks for the info Jim, very interesting.
Mike, ISO Freddy Spider-Man wobbler proto and Green GITD Infredible Hulk wobbler.
IG: mikemcc83
IG: mikemcc83
- Reverend
- HoF 2013 & CotY

- Posts: 5327
- Joined: Fri Feb 19, 2010 11:14 pm
- Location: El Chuco, Tejas
Re: I did not know that (making a Wobbler)
Very cool Jim, I was lucky enough to hold one of these last week at Kevin's house. I was not a Funko mold but looked the same. I would of though it would of had been a split mold. Very interesting
ISO Pop Spastik Tiki protos, ALL OF THEM!
REAL MEN DON'T KEEP SCORE!
SELL OUTS NEED TO RESTOCK SO THEY CAN SELL OUT AGAIN!
Pot meet KETTLE
My mom named me Jacob/Unfortunately that's not all I get called

Haters going to hate so let the cry babies cry!
Pot meet KETTLE
Brian@Funko wrote:GO boxless..it is more fun!
My mom named me Jacob/Unfortunately that's not all I get called

Haters going to hate so let the cry babies cry!
- HiMyNameIsSean
- HoF 2018 & CotM

- Posts: 1131
- Joined: Mon Jun 18, 2012 12:44 am
- Location: Lodi, CA
Re: I did not know that (making a Wobbler)
This is such an awesome item to have! And very cool info, I didnt know that!
Hi My Name Is Sean!



- yoohooal
- Hall of Fame Class of 2007

- Posts: 5554
- Joined: Tue Jun 24, 2003 4:01 pm
- Location: Mount Dora, Florida
- dotpattern
- Posts: 181
- Joined: Tue Nov 08, 2011 10:31 pm
- Location: New York, NY
- Contact:
Re: I did not know that (making a Wobbler)
Is this the same kind of process on this cool video? pouring the plastic into molds at 1:20 http://www.youtube.com/watch?v=5cHuU_cKD0M&t=30s
a l e c
- Alleycat
- HoF 2008 & CotY

- Posts: 9818
- Joined: Tue Mar 08, 2005 12:49 pm
- Location: Maitland, Florida
Re: I did not know that (making a Wobbler)
Looks more like Chastitycadabra to me. Very cool, Jim. Great addition to the Funko Museum
.
Craig here......
Craig here......
- sophie_dee11
- Posts: 1545
- Joined: Wed Feb 22, 2012 9:01 am
- Location: QLD, Australia
Re: I did not know that (making a Wobbler)
That's really awesome! Thanks for sharing, Jim!
- chester
- Hall of Fame Class of 2009

- Posts: 3926
- Joined: Mon Jul 07, 2003 11:53 pm
- Location: Ferndale/Michigan
Re: I did not know that (making a Wobbler)
That is some cool info. Jim.
Hello everyone! In case you don't know my name is Paul(Chester if your nasty)
- FFJim
- HoF 2007 & CotY

- Posts: 3024
- Joined: Tue Aug 24, 2004 11:19 am
- Location: Michigan
Re: I did not know that (making a Wobbler)
The YouTube video for some other company's toy production really helped fill in lingering questions I had. The "spin cycle" was a key element. Thanks for posting that.
- dotpattern
- Posts: 181
- Joined: Tue Nov 08, 2011 10:31 pm
- Location: New York, NY
- Contact:
Re: I did not know that (making a Wobbler)
I think they're using a softer plastic than vinyl on the video. That's my number one request is to see just a little sneak peak at the funko factory line, or even a similar operation. Is there a room full of people hand painting or a line of robot machines masking and spray painting? Trade secrets.
a l e c
Who is online
Users browsing this forum: No registered users


