HELP!!! Wobbler Mechanic needed. Pay low. Appreciation high.

It don't mean a thing if it ain't got a spring. Come inside and chat about Funko Wacky Wobblers (bobble heads, for the less sophisticated).
Wacky Nut

HELP!!! Wobbler Mechanic needed. Pay low. Appreciation high.

Postby Wacky Nut » Sun Aug 08, 2004 10:48 am

I have two 20" Wobblers that don't sit flat. The reason is that there are rods extending through the wobblers that are too long and push a bulge out on the bottom. There is a hole in the bottom of the base about the same size as the rod. The only thought I've had is to somehow cut a 1/2" of the rod. I don't know what to use to cut the rod since it would have to fit into that small hole. Any ideas? Any alternate suggestions? Does anyone else have this same problem?

User avatar
Sluggo
Hall of Fame Class of 2008
Hall of Fame Class of 2008
Posts: 1585
Joined: Sun Apr 27, 2003 5:05 pm

Postby Sluggo » Sun Aug 08, 2004 12:27 pm

Wacky Nut I've seen this problem on other 20" pieces too. I had a Bone Daddy that was so bad I sent it back to Tower Records for replacement. I wonder if that rod is even necessary? If not you could enlarge the hole just big enough to slip it out and then warm up the base just enough to make the plastic plyable and then flatten it back out. Well any way good luck my friend from a fellow Hoosier.

Sluggo
"Pixie & Dixie and Mr. Jinx, Please!"
"Just a pillow of the community"

User avatar
gregoman
Hall of Fame Class of 2006
Hall of Fame Class of 2006
Posts: 1952
Joined: Tue Jan 06, 2004 1:39 pm
Location: basement of the Alamo
Contact:

Postby gregoman » Sun Aug 08, 2004 2:14 pm

Sounds serius Doctor...Will he make it??
I'm invisible!

kevinbuddha
Hall of Fame Class of 2007
Hall of Fame Class of 2007
Posts: 9418
Joined: Mon Apr 28, 2003 11:06 am
Location: Minnesota-where Sleestaks run free!

Postby kevinbuddha » Sun Aug 08, 2004 5:01 pm

I had that problem with three of my 20" wobblers. I sent that back to the seller and had replacements sent out. I am sorry that I do not know what else to tell you besides that option. Best of luck to you!
Minnesota.....where the Sleestaks & Pakuni run free!

Funko's Official Historian

User avatar
Krusty
Hall of Fame Class of 2006
Hall of Fame Class of 2006
Posts: 609
Joined: Tue Jun 24, 2003 3:45 pm

Postby Krusty » Sun Aug 08, 2004 6:18 pm

I had that problem with my 20" Underdog, and I resolved it simply by getting some of those adhesive pads that you can put on the bottom of chairs of tables. I put three of the pads on the base, equidistant from each other, and they act as a tripod. It now sits perfectly flat and still (except for the head, of course!).

K

kevinbuddha
Hall of Fame Class of 2007
Hall of Fame Class of 2007
Posts: 9418
Joined: Mon Apr 28, 2003 11:06 am
Location: Minnesota-where Sleestaks run free!

Postby kevinbuddha » Sun Aug 08, 2004 8:08 pm

Excellent solution Len! I will try that with my Underdog, he's a little off balance.
Minnesota.....where the Sleestaks & Pakuni run free!

Funko's Official Historian


Return to “Wacky Wobblers”

Who is online

Users browsing this forum: No registered users