24 INCH RATS
-
dustman94
- Hall of Fame Class of 2011

- Posts: 3575
- Joined: Mon Apr 28, 2008 8:06 pm
- Location: HELL
24 INCH RATS
LET ME KNOW WHAT YOU THINK. I GOT MY 24" RAT AND I HAVE A FEW ROUGH SPOTS AND HAVE A FEW MAGIC MARKER TOUCH-UPS ON THE PAINT. I KNOW THEY ARE GOING TO COLLECT DUST ANDTHE ROUGH SPOTS HARD TO CLEAN. WOULD IT BE A BAD IDEA TO EITHER WAX MY RAT WITH CAR WAX (NOT THE FLAT AREAS) OR I WAS THINKING OF SPRAYING A CLEAR COAT ON IT. THE CLEAR COAT SHOULD BE SATIN, BUTTTTTTTTTTTTTT I LOVE GLOSS. I KNOW WAXING OR SATIN WOULDN'T HURT THE VALVE BUT WHAT ABOUT HIGH GLOSS?
- Rat Fink Dennis
- Hall of Fame Class of 2010

- Posts: 6748
- Joined: Wed Feb 14, 2007 3:14 pm
- Location: ATL, GA
Re: 24 INCH RATS
They all seem to have a few imperfections here and there, but I wouldn't touch it. Then again, your Rat do what you want. 
ROTY CC 2007
COTM January 2008
COTY CC 2008
HOF CC 2010
LEMMY WOBBLER FOR '11
Founding member of the "WOW MOM" Crew '08

COTM January 2008
COTY CC 2008
HOF CC 2010
LEMMY WOBBLER FOR '11
Founding member of the "WOW MOM" Crew '08

- Enik
- Posts: 989
- Joined: Fri Jul 18, 2008 11:07 am
- Location: Annapolis MD area
Re: 24 INCH RATS
dustman94 wrote:...WOULD IT BE A BAD IDEA TO EITHER WAX MY RAT...
oh, you meant... um never mind
A lot of statue/garage kit owners swear by Future floor wax to protect & seal. (and its shiny
Mark
- Funkolicious
- Collector of the Month

- Posts: 1921
- Joined: Wed Feb 28, 2007 6:57 pm
- Location: Helotes, TEXAS
Re: 24 INCH RATS
If you must clear coat your rat then I would suggest using a water based acrylic. The type you thin with water and spray on using an airbrush. There is no telling how the spray can type of clear coats will react with the metallic paint being used on the banks.
"Rookie of the Year" 2008
"COTM" Oct. 2008
"COTM" Oct. 2008
-
dustman94
- Hall of Fame Class of 2011

- Posts: 3575
- Joined: Mon Apr 28, 2008 8:06 pm
- Location: HELL
Re: 24 INCH RATS
I WAS GOING TO USE A WATER BASE SANDING SEALER TO PROTECT THE PAINT AND IT LOCKS OUT THE PVC OILS, THEN CLEAR COAT IT WATER BASE.
- Funkolicious
- Collector of the Month

- Posts: 1921
- Joined: Wed Feb 28, 2007 6:57 pm
- Location: Helotes, TEXAS
Re: 24 INCH RATS
dustman94 wrote:I WAS GOING TO USE A WATER BASE SANDING SEALER TO PROTECT THE PAINT AND IT LOCKS OUT THE PVC OILS, THEN CLEAR COAT IT WATER BASE.
That should work out just fine. The Bamboo Lou custom car I did for Al was constantly leaking oil the entire time I had it, I thought it would never stop.
"Rookie of the Year" 2008
"COTM" Oct. 2008
"COTM" Oct. 2008
-
dustman94
- Hall of Fame Class of 2011

- Posts: 3575
- Joined: Mon Apr 28, 2008 8:06 pm
- Location: HELL
Re: 24 INCH RATS
Funkolicious wrote:dustman94 wrote:I WAS GOING TO USE A WATER BASE SANDING SEALER TO PROTECT THE PAINT AND IT LOCKS OUT THE PVC OILS, THEN CLEAR COAT IT WATER BASE.
That should work out just fine. The Bamboo Lou custom car I did for Al was constantly leaking oil the entire time I had it, I thought it would never stop.
HAD A MOTORCYCLE LIKE THAT, I THINK IT WAS BUILT IN MILWAUKEE
- FranckOz
- Posts: 845
- Joined: Sat Apr 25, 2009 9:15 am
- Location: Darwin, AUSTRALIA
Re: 24 INCH RATS
Water based Acrylic sealers are definately the way to go. I use them all the time for my paintings.
Wax based sealers/polish can often have a turpentine based emulsifier/dryer which will eventually eat away at plastics and acrylics.
Those rats are the bomb !!!!
Wax based sealers/polish can often have a turpentine based emulsifier/dryer which will eventually eat away at plastics and acrylics.
Those rats are the bomb !!!!
Who is online
Users browsing this forum: No registered users
