The Physics of Pops

We're not talking about soda, folks. This forum is dedicated to Funko's stylish Pop! series of vinyl figures, with or without springs.
Forum rules
This section is for general Pop discussion, not showing off your recent acquisitions. Please use the Dance Hall for collection addition pictures.

Please post Funko subscription box and item discussions in the Powered By Funko section.
User avatar
dork_knight
HoF 2025 + Spirit
HoF 2025 + Spirit
Posts: 2958
Joined: Tue May 09, 2017 4:58 pm
Location: Vallejo, CA
Contact:

The Physics of Pops

Postby dork_knight » Mon Jul 30, 2018 7:25 pm

I recently watched a review video of the Ant-Man pops and the reviewer noted that the Hank Pym masked and unmasked pops had the same sculpt for the body, but they were both different sizes.

Do you suppose this is because the weights of the pop head?

How do sculpting artist know that their design is balance and can stand on 2 feet? I've always wondered this :P
Bah Weep Gragnah Weep Nini Bong!
FunKlub Member:2016000002828
Funko Collectibles Count:4000+
Pokémon GO! Pokédex: 807 | Trainer Name: DorkKn1ght

A few fellow Funko Funatics and I started a podcast: http://www.buzzsprout.com/1015576
FB: Dave Metran | IG: @dork_knight46 | TW: @davemetran

User avatar
Classier
Posts: 2451
Joined: Mon Dec 19, 2016 12:28 pm
Location: Spokane, WA

Re: The Physics of Pops

Postby Classier » Mon Jul 30, 2018 7:27 pm

It’s probably lots of trial and error when it comes to figuring out poses and their stability.
Image

User avatar
TriFeckTa
Posts: 2706
Joined: Tue Sep 20, 2016 3:11 pm
Location: Little Saigon, California
Contact:

Re: The Physics of Pops

Postby TriFeckTa » Mon Jul 30, 2018 9:06 pm

Very interesting that you brought that up, that gets me thinking about how the prototypes that we receive/buy play into this process. For the most part all of my prototypes stand pretty well, so my guess is that they prefect all the technical aspects prior to producing the proto.
Hey there, I'm Michael and I am an Iron Man Junkie!
Iron Man POP! Collection (Production Pieces): COMPLETE
Iron Man Proto Count: 50
Iron Man Wacky Wobblers: IN PROGRESS

ISO: Gold Mark 2 Iron Man CHASE Wobbler, Gold Mark 1 Iron Man CHASE Wobbler, Gold and Silver 1/12 Freddy Stark Wobblers, and IRON MAN RELATED PROTOS

Check out my IG: @triifeckta
ImageImage

User avatar
dork_knight
HoF 2025 + Spirit
HoF 2025 + Spirit
Posts: 2958
Joined: Tue May 09, 2017 4:58 pm
Location: Vallejo, CA
Contact:

Re: The Physics of Pops

Postby dork_knight » Mon Jul 30, 2018 9:10 pm

TriFeckTa wrote:Very interesting that you brought that up, that gets me thinking about how the prototypes that we receive/buy play into this process. For the most part all of my prototypes stand pretty well, so my guess is that they prefect all the technical aspects prior to producing the proto.


Yes! I'm not familiar with sculpting software, but I'm wondering if there is something in the software that lets the artist know if something is balanced?
Bah Weep Gragnah Weep Nini Bong!
FunKlub Member:2016000002828
Funko Collectibles Count:4000+
Pokémon GO! Pokédex: 807 | Trainer Name: DorkKn1ght

A few fellow Funko Funatics and I started a podcast: http://www.buzzsprout.com/1015576
FB: Dave Metran | IG: @dork_knight46 | TW: @davemetran

User avatar
HarryPOPter
Posts: 1022
Joined: Tue Jul 25, 2017 12:53 pm
Contact:

Re: The Physics of Pops

Postby HarryPOPter » Tue Jul 31, 2018 2:11 pm

That's very interesting and something I never thought about. I'm sure they have measurements already about how much weight can be on top in proportion to the rest of the pop, probably must be some software like everyone else said. I know that there are some pops with smaller bodies that have a stand too so I wonder how they decide which pops will have a stand instead of redoing the pop
Jenny
For more fun on IG: @harrypopter

Harry Potter. Disney villains.

Fundays 2017 :freddy1:

User avatar
hailmary25
Posts: 5595
Joined: Tue Mar 10, 2015 10:46 am
Location: Philadelphia
Contact:

Re: The Physics of Pops

Postby hailmary25 » Tue Jul 31, 2018 2:26 pm

I am sure they are experts on this now. That they know which pops need a little balance disk and which don't.
Image
Signed Pops:101
MM: 116
Pops :554
First Pop: Jax Teller
Most Recent: Signed DW Silence
Top Pop: Cobweb Bilbo
Image

User avatar
Jezter
Collector of the Month
Collector of the Month
Posts: 5281
Joined: Sat Jul 12, 2014 10:53 am
Location: West Chester, PA

Re: The Physics of Pops

Postby Jezter » Tue Jul 31, 2018 2:33 pm

I agree with what everyone has said thus far. That said, obviously some factory issues cause problems for pops and they will come with crooked feet or ones slightly out of balance so they fall over easy. Those are frustrating, but I've had worse issues with the skinny pops bending in the middle, which is extremely frustrating when adjusting them with the hot water treatment doesn't seem to last.

I admit though I've never thought about the designing aspect of figuring out how they know they will balance. Maybe someone who works for Funko can chime in and educate us! :D
Hey I'm John! :joker:

Pops!- 860ish
Dorbz: 35
Mystery Minis: 34
Sodas: 7
Vinyl Idolz: 2
Hikari: 1
Mini-Hikari: 1
Instagram: courtjezter

This Is Where A Really Neat Signature Is Going To Go....Eventually...Maybe.

User avatar
CptWhizbang
Posts: 216
Joined: Sat Jul 06, 2013 10:28 pm

Re: The Physics of Pops

Postby CptWhizbang » Tue Jul 31, 2018 4:15 pm

ngl I think Funko would much rather consumers and fans think the company has never performed a single balancing or stability test on their POPs than have to admit they have run these tests on different sculpts and then knowingly bring to market female POPs that lean 80-60+ degrees on their stands...
Current POPs: 219
Current Pocket POPs: 20
Current Dorbz: 54

Marvel Dream POP List: Metallic BuckyCap w/gun POP, Classic Black Widow POP, Nomad (Steve Rogers) POP
Marvel Dream Dorbz List: CA:TFA Dorbz, Golden Age Bucky Dorbz, CA:CW Dorbz Ride with Steve, Sam, Bucky, and VW Bug

User avatar
jagpop
Posts: 3466
Joined: Thu Apr 14, 2016 3:24 pm
Location: So Cal

Re: The Physics of Pops

Postby jagpop » Tue Jul 31, 2018 4:28 pm

TriFeckTa wrote:Very interesting that you brought that up, that gets me thinking about how the prototypes that we receive/buy play into this process. For the most part all of my prototypes stand pretty well, so my guess is that they prefect all the technical aspects prior to producing the proto.

Funny you mention that all your protos are basically well balanced. Same with mine but when it comes to the production piece, some are not on par with the proto. I wonder what was missed during the process. Proto stands properly, production piece doesn't.
Image

I am not in danger, I am the danger! A guy opens his door and gets shot and you think that of me? No. I am the one who knocks!

User avatar
TriFeckTa
Posts: 2706
Joined: Tue Sep 20, 2016 3:11 pm
Location: Little Saigon, California
Contact:

Re: The Physics of Pops

Postby TriFeckTa » Thu Aug 02, 2018 2:10 pm

jagpop wrote:
TriFeckTa wrote:Very interesting that you brought that up, that gets me thinking about how the prototypes that we receive/buy play into this process. For the most part all of my prototypes stand pretty well, so my guess is that they prefect all the technical aspects prior to producing the proto.

Funny you mention that all your protos are basically well balanced. Same with mine but when it comes to the production piece, some are not on par with the proto. I wonder what was missed during the process. Proto stands properly, production piece doesn't.

I honestly think it has to do with quality control, because once they approve the proto and start mass producing the pop, some or many are bound to suffer in terms of quality.
Hey there, I'm Michael and I am an Iron Man Junkie!
Iron Man POP! Collection (Production Pieces): COMPLETE
Iron Man Proto Count: 50
Iron Man Wacky Wobblers: IN PROGRESS

ISO: Gold Mark 2 Iron Man CHASE Wobbler, Gold Mark 1 Iron Man CHASE Wobbler, Gold and Silver 1/12 Freddy Stark Wobblers, and IRON MAN RELATED PROTOS

Check out my IG: @triifeckta
ImageImage


Return to “Pop!”

Who is online

Users browsing this forum: No registered users