Star Wars pop bases
Forum rules
This section is for general Pop discussion, not showing off your recent acquisitions. Please use the Dance Hall for collection addition pictures.
Please post Funko subscription box and item discussions in the Powered By Funko section.
This section is for general Pop discussion, not showing off your recent acquisitions. Please use the Dance Hall for collection addition pictures.
Please post Funko subscription box and item discussions in the Powered By Funko section.
- gunner jed
- Posts: 286
- Joined: Sat May 05, 2018 5:35 pm
- Location: London, UK
- Contact:
Star Wars pop bases
What’s the best way to get the new Star Wars pops off their bases? I’ve tried boiling water and a hairdryer but still can’t get her off
Twitter: @filmaddict123
YouTube: http://www.youtube.com/c/jedwagman (I make cool marvel movie mashups and edits)




YouTube: http://www.youtube.com/c/jedwagman (I make cool marvel movie mashups and edits)




-
N POP
- Posts: 169
- Joined: Wed May 02, 2018 6:28 pm
Re: Star Wars pop bases
I don’t have any tips, but I’m with you in not wanting those bases on my pops.
- racheva
- Posts: 1449
- Joined: Wed Nov 25, 2015 2:51 pm
- Location: ny
- Contact:
Re: Star Wars pop bases
I’ve literally used a knife. It’s brutal.
SDCC 2011-2023; Fundays 2016-2022; NYCC 2014-2022; Fright Night II 2022; SWCO 2017; D23 Expo 2015/2017


- bpc908
- Posts: 142
- Joined: Thu Oct 13, 2016 12:13 am
- Location: San Tan Valley, AZ
- Contact:
Re: Star Wars pop bases
Is there any reason that Funko is now gluing the pops to their bases now?
- Classier
- Posts: 2451
- Joined: Mon Dec 19, 2016 12:28 pm
- Location: Spokane, WA
Re: Star Wars pop bases
bpc908 wrote:Is there any reason that Funko is now gluing the pops to their bases now?
Hasbro probably didn’t like that they were optional before.

- gunner jed
- Posts: 286
- Joined: Sat May 05, 2018 5:35 pm
- Location: London, UK
- Contact:
Re: Star Wars pop bases
racheva wrote:I’ve literally used a knife. It’s brutal.
What, to slice the feet off the base?? Did the pop end up all in one piece off the base?
Twitter: @filmaddict123
YouTube: http://www.youtube.com/c/jedwagman (I make cool marvel movie mashups and edits)




YouTube: http://www.youtube.com/c/jedwagman (I make cool marvel movie mashups and edits)




-
yanban
- Posts: 1222
- Joined: Wed Feb 07, 2018 6:01 pm
Re: Star Wars pop bases
Question - when did they start gluing them? I am in In box collector so don't have occasion often to notice,
- zwahelian
- Posts: 1084
- Joined: Sat Sep 03, 2016 12:43 am
- Location: San Diego
Re: Star Wars pop bases
I think this is a good question to ask during the weekly Q&A session on Thursday. I thought Funko had the license to make bobble head figures...not specifically bobble head figures that are attached to the base. Time to start a petition 

IG: funkh0e
Started collecting: July 2016 | Pop! Star Wars: 83 | Pop! Marvel: TBA | Pop! Heroes: 45 | Pop! Rides: 3 | Total Pop!s: 1,000+
Grail: NYCC Qui Gon Jinn, Indy's Ride, Holo Qui Gon, Flocked Wicket
- Dumplingbox
- Posts: 203
- Joined: Sun May 21, 2017 9:48 pm
- Location: Los Angeles, CA
- Contact:
Re: Star Wars pop bases
I would think you need to cut it off and then carefully sand it down cleanly.
"Ain't no thing like me, except me!" - Rocket


- TJLAUTERBACH
- Posts: 2968
- Joined: Sat Feb 10, 2018 8:43 pm
- Location: Baltimore
Re: Star Wars pop bases
Not sure how it would work on a pop but a steamer will reactivate most glue to be able to seperate. If don't have access to a steamer maybe an iron with steam. Just thinking of alternatives that might work.

- racheva
- Posts: 1449
- Joined: Wed Nov 25, 2015 2:51 pm
- Location: ny
- Contact:
Re: Star Wars pop bases
gunner jed wrote:racheva wrote:I’ve literally used a knife. It’s brutal.
What, to slice the feet off the base?? Did the pop end up all in one piece off the base?
I worked the knife under the feet and kinda jimmied the feet up and off. Some worked better than others and some I haven't been able to do yet. Some paint sometimes gets left on the base, but the pop itself looks fine.
SDCC 2011-2023; Fundays 2016-2022; NYCC 2014-2022; Fright Night II 2022; SWCO 2017; D23 Expo 2015/2017


- DocRamon
- Posts: 1357
- Joined: Mon Feb 13, 2012 3:24 pm
- Location: Texas
Re: Star Wars pop bases
Boil some water in a small dish and dunk the base in. I usually have the water level come up to about the character’s knees. This loosens the glue and softens the plastic. I do NOT recommend using a knife to pry the character off, because it’s too easy to damage the figure or hurt yourself -- personal experience. Instead, I use a LEGO separator.

This helps you wedge under the feet, but it’s literally designed to treat plastic with a gentle touch. As you wedge under, you’ll find where the peg sticks into the character’s foot -- usually the heel, sometimes the middle. Try to get under the foot everywhere around that peg. The peg will be the hard part, because you’ll mostly be relying on the warm water and brute force.
Continue to heat water, dunk, and pry. It might take several times. Use the LEGO separator to wedge under and push up, and LIGHTLY pull on the figure's body if you need to get a little more force. After you can dislodge the peg from one foot, the second one usually comes pretty quickly after. You’ll likely be left with glue residue on the base and/or figure.
I’ve used this method with MANY of the glued characters so far. All have come off nicely... eventually. Do not expect this to be a quick 5-minute process. Some characters will take a long time. The yellow Resistance BB Unit is hell.
Good luck!

This helps you wedge under the feet, but it’s literally designed to treat plastic with a gentle touch. As you wedge under, you’ll find where the peg sticks into the character’s foot -- usually the heel, sometimes the middle. Try to get under the foot everywhere around that peg. The peg will be the hard part, because you’ll mostly be relying on the warm water and brute force.
Continue to heat water, dunk, and pry. It might take several times. Use the LEGO separator to wedge under and push up, and LIGHTLY pull on the figure's body if you need to get a little more force. After you can dislodge the peg from one foot, the second one usually comes pretty quickly after. You’ll likely be left with glue residue on the base and/or figure.
I’ve used this method with MANY of the glued characters so far. All have come off nicely... eventually. Do not expect this to be a quick 5-minute process. Some characters will take a long time. The yellow Resistance BB Unit is hell.
Good luck!
- ShockWaveZ55
- Posts: 562
- Joined: Tue Jan 26, 2016 9:49 pm
- Location: SoCal
Re: Star Wars pop bases
DocRamon wrote:Boil some water in a small dish and dunk the base in. I usually have the water level come up to about the character’s knees. This loosens the glue and softens the plastic. I do NOT recommend using a knife to pry the character off, because it’s too easy to damage the figure or hurt yourself -- personal experience. Instead, I use a LEGO separator.
This helps you wedge under the feet, but it’s literally designed to treat plastic with a gentle touch. As you wedge under, you’ll find where the peg sticks into the character’s foot -- usually the heel, sometimes the middle. Try to get under the foot everywhere around that peg. The peg will be the hard part, because you’ll mostly be relying on the warm water and brute force.
Continue to heat water, dunk, and pry. It might take several times. Use the LEGO separator to wedge under and push up, and LIGHTLY pull on the figure's body if you need to get a little more force. After you can dislodge the peg from one foot, the second one usually comes pretty quickly after. You’ll likely be left with glue residue on the base and/or figure.
I’ve used this method with MANY of the glued characters so far. All have come off nicely... eventually. Do not expect this to be a quick 5-minute process. Some characters will take a long time. The yellow Resistance BB Unit is hell.
Good luck!
Fantastic advice! Dipping in boiling water usually does the trick for me but never though of using a lego seperator for the hard to pry pops!
- Ar7
- Posts: 340
- Joined: Tue May 09, 2017 12:21 am
- Location: San Diego
Re: Star Wars pop bases
DocRamon wrote:Boil some water in a small dish and dunk the base in. I usually have the water level come up to about the character’s knees. This loosens the glue and softens the plastic. I do NOT recommend using a knife to pry the character off, because it’s too easy to damage the figure or hurt yourself -- personal experience. Instead, I use a LEGO separator.
This helps you wedge under the feet, but it’s literally designed to treat plastic with a gentle touch. As you wedge under, you’ll find where the peg sticks into the character’s foot -- usually the heel, sometimes the middle. Try to get under the foot everywhere around that peg. The peg will be the hard part, because you’ll mostly be relying on the warm water and brute force.
Continue to heat water, dunk, and pry. It might take several times. Use the LEGO separator to wedge under and push up, and LIGHTLY pull on the figure's body if you need to get a little more force. After you can dislodge the peg from one foot, the second one usually comes pretty quickly after. You’ll likely be left with glue residue on the base and/or figure.
I’ve used this method with MANY of the glued characters so far. All have come off nicely... eventually. Do not expect this to be a quick 5-minute process. Some characters will take a long time. The yellow Resistance BB Unit is hell.
Good luck!
This is more than a pro tip. This is professional advice. Very well put together. Thanks for sharing your bumps and bruises to help us avoid making similar mistakes. Time for some warm water, patience, and stealing one of my son’s many LEGO separator-thingies. <— That’s the real name, by the way.
Did someone say, Disney POP!s?
Funko Fundays 2015, 2016, 2017, 2018, 2022!
Funko Fundays 2015, 2016, 2017, 2018, 2022!
- gunner jed
- Posts: 286
- Joined: Sat May 05, 2018 5:35 pm
- Location: London, UK
- Contact:
Re: Star Wars pop bases
DocRamon wrote:Boil some water in a small dish and dunk the base in. I usually have the water level come up to about the character’s knees. This loosens the glue and softens the plastic. I do NOT recommend using a knife to pry the character off, because it’s too easy to damage the figure or hurt yourself -- personal experience. Instead, I use a LEGO separator.
This helps you wedge under the feet, but it’s literally designed to treat plastic with a gentle touch. As you wedge under, you’ll find where the peg sticks into the character’s foot -- usually the heel, sometimes the middle. Try to get under the foot everywhere around that peg. The peg will be the hard part, because you’ll mostly be relying on the warm water and brute force.
Continue to heat water, dunk, and pry. It might take several times. Use the LEGO separator to wedge under and push up, and LIGHTLY pull on the figure's body if you need to get a little more force. After you can dislodge the peg from one foot, the second one usually comes pretty quickly after. You’ll likely be left with glue residue on the base and/or figure.
I’ve used this method with MANY of the glued characters so far. All have come off nicely... eventually. Do not expect this to be a quick 5-minute process. Some characters will take a long time. The yellow Resistance BB Unit is hell.
Good luck!
I tried boiling water and didn’t work but I’ll try again with the Lego piece- got loads of them and never use them!
Twitter: @filmaddict123
YouTube: http://www.youtube.com/c/jedwagman (I make cool marvel movie mashups and edits)




YouTube: http://www.youtube.com/c/jedwagman (I make cool marvel movie mashups and edits)




-
DubJay81
- Posts: 329
- Joined: Thu Oct 05, 2017 8:31 pm
- Location: New York City
- Contact:
Re: Star Wars pop bases
I’ve always wondered why this was so. Is it because they gave Funko the license for Star Wars they want all there “Products” on the Star Wars base to stand out? There the same size Pops so why not just leave them out totally. Don’t have many SW Pops due to my OCD I love to collect sets and if I get into SW I’ll be literally broke
.
Keep spreading that Funko Love...

New York Comic 2014/15/16/17/18/19/20(Virtual)
NYC Fugitive Event 2018/2019

New York Comic 2014/15/16/17/18/19/20(Virtual)
NYC Fugitive Event 2018/2019
- gunner jed
- Posts: 286
- Joined: Sat May 05, 2018 5:35 pm
- Location: London, UK
- Contact:
Re: Star Wars pop bases
DocRamon wrote:Boil some water in a small dish and dunk the base in. I usually have the water level come up to about the character’s knees. This loosens the glue and softens the plastic. I do NOT recommend using a knife to pry the character off, because it’s too easy to damage the figure or hurt yourself -- personal experience. Instead, I use a LEGO separator.
This helps you wedge under the feet, but it’s literally designed to treat plastic with a gentle touch. As you wedge under, you’ll find where the peg sticks into the character’s foot -- usually the heel, sometimes the middle. Try to get under the foot everywhere around that peg. The peg will be the hard part, because you’ll mostly be relying on the warm water and brute force.
Continue to heat water, dunk, and pry. It might take several times. Use the LEGO separator to wedge under and push up, and LIGHTLY pull on the figure's body if you need to get a little more force. After you can dislodge the peg from one foot, the second one usually comes pretty quickly after. You’ll likely be left with glue residue on the base and/or figure.
I’ve used this method with MANY of the glued characters so far. All have come off nicely... eventually. Do not expect this to be a quick 5-minute process. Some characters will take a long time. The yellow Resistance BB Unit is hell.
Good luck!
Thank you so much for this! It worked!!! The Lego piece was really helpful. The second foot was actually harder than the first (although it had a bigger peg)
Twitter: @filmaddict123
YouTube: http://www.youtube.com/c/jedwagman (I make cool marvel movie mashups and edits)




YouTube: http://www.youtube.com/c/jedwagman (I make cool marvel movie mashups and edits)




- HarryG5O
- Posts: 493
- Joined: Sat May 07, 2016 11:36 am
Re: Star Wars pop bases
The fact they glue the feet on the base is so annoying sometimes. Love the Lego separator thing idea though. Might give that a go 
You like my Savitar Avitar?!
Pops: 253
Marvel: 146
DC: 33
Star Wars: 48
Doctor Who: 19
Harry Potter: 3
Minecraft: 1
1st Pop: The Flash (CW)
100th Pop: Ron Weasley
200th Pop: Cap America (Quantum)
Latest Pop: Ben Kenobi
Favourite Pop: General Greivous
My collection: https://www.poppriceguide.com/guide/mem ... P8OEP3ZBE/

Pops: 253
Marvel: 146
DC: 33
Star Wars: 48
Doctor Who: 19
Harry Potter: 3
Minecraft: 1
1st Pop: The Flash (CW)
100th Pop: Ron Weasley
200th Pop: Cap America (Quantum)
Latest Pop: Ben Kenobi
Favourite Pop: General Greivous
My collection: https://www.poppriceguide.com/guide/mem ... P8OEP3ZBE/

-
yanban
- Posts: 1222
- Joined: Wed Feb 07, 2018 6:01 pm
Re: Star Wars pop bases
DocRamon wrote:Boil some water in a small dish and dunk the base in. I usually have the water level come up to about the character’s knees. This loosens the glue and softens the plastic. I do NOT recommend using a knife to pry the character off, because it’s too easy to damage the figure or hurt yourself -- personal experience. Instead, I use a LEGO separator.
This helps you wedge under the feet, but it’s literally designed to treat plastic with a gentle touch. As you wedge under, you’ll find where the peg sticks into the character’s foot -- usually the heel, sometimes the middle. Try to get under the foot everywhere around that peg. The peg will be the hard part, because you’ll mostly be relying on the warm water and brute force.
Continue to heat water, dunk, and pry. It might take several times. Use the LEGO separator to wedge under and push up, and LIGHTLY pull on the figure's body if you need to get a little more force. After you can dislodge the peg from one foot, the second one usually comes pretty quickly after. You’ll likely be left with glue residue on the base and/or figure.
I’ve used this method with MANY of the glued characters so far. All have come off nicely... eventually. Do not expect this to be a quick 5-minute process. Some characters will take a long time. The yellow Resistance BB Unit is hell.
Good luck!
I have to be honest - I never even knew the lego separator existed. Thanks so much for the advice!
- FlinksPoppinPics
- Posts: 612
- Joined: Fri Dec 28, 2018 2:07 pm
- Location: Baltimore, MD
- Contact:
Who is online
Users browsing this forum: Baidu [Spider], Google [Bot]











