Pop Bobblehead Without a Spring

We're not talking about soda, folks. This forum is dedicated to Funko's stylish Pop! series of vinyl figures, with or without springs.
Forum rules
This section is for general Pop discussion, not showing off your recent acquisitions. Please use the Dance Hall for collection addition pictures.

Please post Funko subscription box and item discussions in the Powered By Funko section.
User avatar
thewerepuppygrr
Posts: 160
Joined: Wed Feb 26, 2014 7:57 am

Pop Bobblehead Without a Spring

Postby thewerepuppygrr » Thu Apr 12, 2018 4:39 am

So I took one of my Marvel pops out of the box for a better look, only to find that the pop doesn't have a spring - just a head resting next to the body! I guess now I'm going to have to source a suitable spring and carefully attach it.

Has anyone else had this problem? I've collected for many years and it's a new one for me!

User avatar
CaseyJones14
HOF 2022 & CotM & CotY
HOF 2022 & CotM & CotY
Posts: 10409
Joined: Wed May 11, 2016 12:32 pm
Location: Dorbztown, USA

Re: Pop Bobblehead Without a Spring

Postby CaseyJones14 » Thu Apr 12, 2018 10:32 am

Huh that's strange. Which Pop was it? I've had some Pop heads "pop" off where the glue didn't hold, but I've never seen a Pop completely missing a spring.
Image
Brett - caseyj0nes14 on Instagram
ISO - Dorbz and McNugget Protos!

ch_aeiro
Posts: 524
Joined: Fri Mar 25, 2016 3:03 pm

Re: Pop Bobblehead Without a Spring

Postby ch_aeiro » Thu Apr 12, 2018 10:39 am

That’s a new one. Was the head already detached before you opened the box?

I think most pop bobble heads use the same spring, you could easily find one for a few bucks.
Hi, I'm Kristi!

User avatar
treswright
Posts: 6045
Joined: Mon May 25, 2015 4:11 am
Location: Dallas, TX
Contact:

Re: Pop Bobblehead Without a Spring

Postby treswright » Thu Apr 12, 2018 10:45 am

ch_aeiro wrote:I think most pop bobble heads use the same spring, you could easily find one for a few bucks.


Having done quite a few LED customs I can definitely state that the springs are NOT all the same. The neck posts vary in size and the spring size along with them. I learned this the hard way when trying to swap the Rocket with Groot head onto the Rocket with jetpack body.
Howdy, I'm Tres :-)

Image

ch_aeiro
Posts: 524
Joined: Fri Mar 25, 2016 3:03 pm

Re: Pop Bobblehead Without a Spring

Postby ch_aeiro » Thu Apr 12, 2018 10:48 am

treswright wrote:
ch_aeiro wrote:I think most pop bobble heads use the same spring, you could easily find one for a few bucks.


Having done quite a few LED customs I can definitely state that the springs are NOT all the same. The neck posts vary in size and the spring size along with them. I learned this the hard way when trying to swap the Rocket with Groot head onto the Rocket with jetpack body.


Oops bad info. I’ve never actually taken part a bobble head so I was basing it off assumptions not experience.
Hi, I'm Kristi!

User avatar
Mizarkie
Posts: 476
Joined: Sat Mar 24, 2018 3:52 am
Location: Bay Area, CA

Re: Pop Bobblehead Without a Spring

Postby Mizarkie » Thu Apr 12, 2018 12:03 pm

Yea im curious which pop it was. Most likely it was just a QC error that wasn't caught. Like others, ive had the head fall off from the spring but never the spring completely gone.
“There is nothing more reassuring than realizing the world is CRAZIER than you are.”

ImageImage

User avatar
jkcohen626
Posts: 1915
Joined: Sat Jul 30, 2016 11:57 pm

Re: Pop Bobblehead Without a Spring

Postby jkcohen626 » Thu Apr 12, 2018 12:31 pm

Is this a newish POP? If it's newer or not vaulted, you might be able to email support@funko.com and they'll send a replacement.
Image Image Image Image
First Funko Product: Captain Rex Wobbler
First POP: Deadpool

SpikePop
Posts: 5
Joined: Thu Apr 12, 2018 12:05 am
Location: Chicago

Re: Pop Bobblehead Without a Spring

Postby SpikePop » Thu Apr 12, 2018 5:55 pm

If it's a rarer one I would definitely get in touch with funko, or the distributor you got it from to see if there's anyway to get a replacement pop or at least the materials to fix it. I'm sure they'd be willing to help out with that.
:freddy4:

User avatar
emoagogo
HoF 2023 & Spirit
HoF 2023 & Spirit
Posts: 2391
Joined: Tue May 09, 2017 2:16 pm
Location: San Diego
Contact:

Re: Pop Bobblehead Without a Spring

Postby emoagogo » Thu Apr 12, 2018 6:11 pm

That’s crazy, should be a simple diy though. Just got find a common marvel pop and start surgery.
Image

Emo or Emilio is fine.
ISO: Pixar Protos
IG: emoagogo


Return to “Pop!”

Who is online

Users browsing this forum: No registered users