Acrylic Stands On All Pops

We're not talking about soda, folks. This forum is dedicated to Funko's stylish Pop! series of vinyl figures, with or without springs.
Forum rules
This section is for general Pop discussion, not showing off your recent acquisitions. Please use the Dance Hall for collection addition pictures.

Please post Funko subscription box and item discussions in the Powered By Funko section.
User avatar
Shinfo13
Posts: 1124
Joined: Sun Jan 17, 2016 10:48 pm
Location: San Dimas, CA

Acrylic Stands On All Pops

Postby Shinfo13 » Fri Jan 12, 2018 2:07 am

Pretty sure it has been covered before , but as an OOB collector I'd really love if Funko switched to adding detachable clear acrylic stands to any and all Pops instead of just nitpicking certain lines/characters. I get tat some molds require it while others (like the marvel line) generally have beefy legs and feet to rely on, but it couldn't hurt.

On a similar note, if that never happens, I'd be just as happy if we could get some sort of mark or wording on each acrylic stand just so we know what character they belong to. My fiance and I are OCD so all our Pops are in order by subject and then lines so we're constantly moving them around on our shelves as we buy new stuff. I always manage to end up with 1 or 2 stands to something random that I then have to try and figure out like some sort of puzzle. I know neither of these will probably never happen but I can dream and just make it my goal to mark the stands myself for now.
Current Pop count: 280
Current Dorbz Count: 16
Newest Pop: SSGSS Kamehameha Goku
Favorite Pop: SS2 Gohan
ISO: Not even sure anymore

Image

User avatar
draemar
Posts: 762
Joined: Tue Mar 10, 2015 3:55 pm
Location: Canada

Re: Acrylic Stands On All Pops

Postby draemar » Fri Jan 12, 2018 2:19 am

I don't know if they could do that without raising the price of all pops. That's a lot of work for not a lot of value added... especially if they're making stands for each specific pop with the names printed on the bottom. If it was just 1 generic stand that could be used for every single pop, it'd be much easier. However, seeing as many collectors are in box collectors, the stand won't even be used.

For the stands that are for specific pops, I do agree it'd be easier to have an identifying mark in case you are moving or whatnot. I also agree that even pops that shouldn't need stands might benefit from having them since they're either very top heavy or the feet don't sit perfectly on a flat surface and cause it to topple over
ImageImageImage

User avatar
cypress
Posts: 297
Joined: Fri Jan 05, 2018 2:34 pm
Location: South Florida
Contact:

Re: Acrylic Stands On All Pops

Postby cypress » Fri Jan 12, 2018 10:07 am

Having a stand for every pop even if it was generic wouldn't be so bad. They used stands for the last Rick and Morty pop's. Honestly I didn't use them because they stand just fine. But I tried taking out a Spiderman Homecoming that has a bobble head last night and it would stand up. Head was too heavy and kept falling over. I had to put it back in the box. Frustrating.
Instagram: cypress561

My Pop Price Guide
Pop Count: 116

Image

User avatar
Zorn88
Posts: 269
Joined: Thu Aug 25, 2016 1:39 pm

Re: Acrylic Stands On All Pops

Postby Zorn88 » Fri Jan 12, 2018 10:24 am

I have never really understood why the Star Wars lines all have uniform bases and nothing else does. Though it is my favorite franchise to collect, so I'm not complaining :)

User avatar
Kitzka
HoF 2017 & CotM
HoF 2017 & CotM
Posts: 3319
Joined: Sun Dec 25, 2011 4:45 pm
Location: Northern NJ

Re: Acrylic Stands On All Pops

Postby Kitzka » Fri Jan 12, 2018 10:34 am

Zorn88 wrote:I have never really understood why the Star Wars lines all have uniform bases and nothing else does. Though it is my favorite franchise to collect, so I'm not complaining :)


it's part of he agreement was lucas/disney.
Image

Looking for Care Bear Protos

User avatar
NightmareMermaid
Collector of the Month
Collector of the Month
Posts: 5299
Joined: Sun Jul 01, 2012 7:52 pm
Contact:

Re: Acrylic Stands On All Pops

Postby NightmareMermaid » Fri Jan 12, 2018 11:19 am

I'm an oob collector and I don't even use the stands that come with some Pop!s. I've tried using them, but find that they don't always help. Plus even though they're clear, I still don't like seeing them beneath the Pop!. I just fix whatever the issue is with hot water and then put museum putty on their feet so they won't fall over.
Marie
❄❄❄ Need 30th anniversary mermaid Ariel, RBtI Ariel Rock Candy, and The Oregon Duck protos ❄❄❄
#PartOfYourWorld
Image

User avatar
Sarcasticguy
Hall of Fame Class of 2023
Hall of Fame Class of 2023
Posts: 4535
Joined: Tue Aug 11, 2015 6:07 pm
Location: Phoenix, Arizona
Contact:

Re: Acrylic Stands On All Pops

Postby Sarcasticguy » Fri Jan 12, 2018 11:38 am

draemar wrote:I don't know if they could do that without raising the price of all pops. That's a lot of work for not a lot of value added... especially if they're making stands for each specific pop with the names printed on the bottom. If it was just 1 generic stand that could be used for every single pop, it'd be much easier. However, seeing as many collectors are in box collectors, the stand won't even be used.

For the stands that are for specific pops, I do agree it'd be easier to have an identifying mark in case you are moving or whatnot. I also agree that even pops that shouldn't need stands might benefit from having them since they're either very top heavy or the feet don't sit perfectly on a flat surface and cause it to topple over


I see your point, but also don't think it's that much harder to carve in a peg for the feet and supply a generic base. They've increased the level of detail across all figures without an increase in figure cost, so I think something like this would be pretty moot.
Hi, I'm Scott.
Instagram: @Sarcasticguy89
Image
ISO:
Any Fallout Protos
Aliens Ellen Ripley Rock Candy Proto
Furiosa and Normal Immortan Joe Protos
SDCC '13 Bloody Predator Pop!
Retro Freddy Thor | Retro Freddy Skeletor

User avatar
garpike
Posts: 53
Joined: Wed Nov 18, 2015 9:07 am
Location: Cincinnati Ohio
Contact:

Re: Acrylic Stands On All Pops

Postby garpike » Fri Jan 12, 2018 1:14 pm

I would LOVE to have stands for McCree and Santa.
I can't get either to stand up!
:(
:freddy3: I'm here for the loads of insider information.

User avatar
The Head
Posts: 2714
Joined: Sat Oct 17, 2015 3:04 pm
Location: Garpax FIRED!!! Kinda...

Re: Acrylic Stands On All Pops

Postby The Head » Fri Jan 12, 2018 2:49 pm

NightmareMermaid wrote:I'm an oob collector and I don't even use the stands that come with some Pop!s. I've tried using them, but find that they don't always help. Plus even though they're clear, I still don't like seeing them beneath the Pop!. I just fix whatever the issue is with hot water and then put museum putty on their feet so they won't fall over.


I'm about to go almost 100% OOB and the whole issue with top heaviness was really stressing me out because even those with the stands, like you said, often lean in an annoying way. The museum puddy is a great idea!! Might need to buy stock in that stuff! lol

User avatar
Gothamite
Posts: 949
Joined: Tue Mar 14, 2017 3:43 pm

Re: Acrylic Stands On All Pops

Postby Gothamite » Fri Jan 12, 2018 2:58 pm

draemar wrote:I don't know if they could do that without raising the price of all pops.


Those Star Wars stands are much bigger than the thin clear stands yet Star Wars Pops are the same price as other Pops, so I don't think adding thin clear stands to all Pops would really impact the price of Pops. If anything, Funko probably makes less money per Star Wars product due to licensing fees, yet I don't see them getting out of the Star Wars business.
Last edited by Gothamite on Fri Jan 12, 2018 3:26 pm, edited 1 time in total.

User avatar
wenhol8710
Posts: 2086
Joined: Sat Sep 20, 2014 2:18 pm
Location: Flood City, PA
Contact:

Re: Acrylic Stands On All Pops

Postby wenhol8710 » Fri Jan 12, 2018 3:07 pm

I have so many Pops that didn't include stands but still refuse to stand, even after boiling and reshaping their feet. My Bombshell Wonder Woman is the one of the worst ones, and I can't figure out why she didn't get a stand when a lot of the others in that line did. Museum putty does work really well, but my shelves get rearranged fairly often to make room for new pieces and it's annoying to have to keep unsticking/resticking Pops.

Awhile back I bought some clear action figure stands from Entertainment Earth and while they worked decently, I still had to museum putty/hot glue the Pops to those since they didn't have holes in the bottom of their feet. It would be great if Funko would just include the clear stands in everything.
wenhol8710 on Instagram

User avatar
alf_ie
Posts: 588
Joined: Wed May 07, 2014 6:50 pm
Location: San Diego, CA

Re: Acrylic Stands On All Pops

Postby alf_ie » Fri Jan 12, 2018 3:09 pm

This boils down to personal preference. And if the cost was passed down to the customer, I am sure a lot of people will be unhappy.

Perhaps a stand-alone (pun intended) figure stand item made by Funko that is sold-separately would help your situation? ...much like the clear Pop Stacks.

Hey Funko, if I can't get any royalties from the idea, how bout a pack of 100? Thanks in advance! ^ __ ^
Fundays
2014 San Diego
2015 San Diego
2016 San Diego
2017 San Diego
2022 San Diego
2023 San Diego

Funkoween
2016 San Diego

Making Fun Movie Premiere
2018 Hollywood

FunKon
2021 Hollywood

Mask-O-Raid
2023 San Diego

IN SEARCH OF: 2011 Funko Freddy Flav any color
IN SEARCH OF: 2023 Funko Freddy Lex Luthor

User avatar
Gothamite
Posts: 949
Joined: Tue Mar 14, 2017 3:43 pm

Re: Acrylic Stands On All Pops

Postby Gothamite » Fri Jan 12, 2018 3:24 pm

alf_ie wrote:This boils down to personal preference. And if the cost was passed down to the customer, I am sure a lot of people will be unhappy.


Again, why would the price go up? Pops with stands aren't more expensive than Pops w/o stands.

User avatar
Shinfo13
Posts: 1124
Joined: Sun Jan 17, 2016 10:48 pm
Location: San Dimas, CA

Re: Acrylic Stands On All Pops

Postby Shinfo13 » Fri Jan 12, 2018 3:34 pm

Personally, if they had to increase the price per Pop just to throw in a stand I'd be all for it. It'll never happen though when they know an overwhelming percentage of their customers prefer in-box collecting. Perhaps the the best solution that I didn't think about was Funko merely making generic stands without pegs available for purchase in bulk quantities and leave people the option to use hot glue or museum putty. I actually took an old stand from one of my Sailor Moon Pops that the peg broke off of and puttied Starfire to it because her hair is longer than her feet making her top heavy and prone to falling alot.
Current Pop count: 280
Current Dorbz Count: 16
Newest Pop: SSGSS Kamehameha Goku
Favorite Pop: SS2 Gohan
ISO: Not even sure anymore

Image

User avatar
CaseyJones14
HOF 2022 & CotM & CotY
HOF 2022 & CotM & CotY
Posts: 10409
Joined: Wed May 11, 2016 12:32 pm
Location: Dorbztown, USA

Re: Acrylic Stands On All Pops

Postby CaseyJones14 » Fri Jan 12, 2018 3:35 pm

I love stands, but only if a Pop falls forwards. Since I use risers I'll just lean them up against if they fall backwards, but if they fall forwards ugh :(
Image
Brett - caseyj0nes14 on Instagram
ISO - Dorbz and McNugget Protos!

User avatar
toro423
HoF 2016 & CotM
HoF 2016 & CotM
Posts: 3793
Joined: Wed Jan 11, 2012 6:28 pm
Location: the SFV, CA
Contact:

Re: Acrylic Stands On All Pops

Postby toro423 » Fri Jan 12, 2018 4:59 pm

garpike wrote:I would LOVE to have stands for McCree and Santa.
I can't get either to stand up!
:(

They re-released McCree with stands. I have found both the reg McCree and USA McCree with a stand.
Hi, Im Ed. OOB is the way to GO!
IG: eltoro423

User avatar
jimma
Posts: 1399
Joined: Thu Sep 08, 2016 3:43 pm
Location: Massachusetts
Contact:

Re: Acrylic Stands On All Pops

Postby jimma » Fri Jan 12, 2018 5:57 pm

Absolute agreement! I have many pops i have to prop up :mad:
ImageImageImageImage

WildberryPOPtarts33
Posts: 948
Joined: Wed May 04, 2016 1:22 pm
Contact:

Re: Acrylic Stands On All Pops

Postby WildberryPOPtarts33 » Fri Jan 12, 2018 6:11 pm

I'd pay a little more to have stands put in with all the pops. We are talking about the little clear stands right?
My name is Morgan. Former admin at KY Funko League of Awesomeness, collector of all things Spider-Gwen, Wonder Woman, and anime.
ISO Asuna proto
@superfunkobros

Image
Funklub #13467 :freddy4:

chelo019
Posts: 68
Joined: Sat Aug 12, 2017 7:55 pm

Re: Acrylic Stands On All Pops

Postby chelo019 » Fri Jan 12, 2018 6:15 pm

I agree with you.

User avatar
garpike
Posts: 53
Joined: Wed Nov 18, 2015 9:07 am
Location: Cincinnati Ohio
Contact:

Re: Acrylic Stands On All Pops

Postby garpike » Tue Jan 23, 2018 3:21 pm

toro423 wrote:
garpike wrote:I would LOVE to have stands for McCree and Santa.
I can't get either to stand up!
:(

They re-released McCree with stands. I have found both the reg McCree and USA McCree with a stand.


Dang...now I gotta find the USA one again...with the stand!

;-)
:freddy3: I'm here for the loads of insider information.

User avatar
runtodere
Posts: 3333
Joined: Mon May 15, 2017 1:33 am

Re: Acrylic Stands On All Pops

Postby runtodere » Tue Jan 23, 2018 6:44 pm

Gothamite wrote:
draemar wrote:I don't know if they could do that without raising the price of all pops.


Those Star Wars stands are much bigger than the thin clear stands yet Star Wars Pops are the same price as other Pops, so I don't think adding thin clear stands to all Pops would really impact the price of Pops. If anything, Funko probably makes less money per Star Wars product due to licensing fees, yet I don't see them getting out of the Star Wars business.

I kind of like the pops without the stands actually.

User avatar
Gothamite
Posts: 949
Joined: Tue Mar 14, 2017 3:43 pm

Re: Acrylic Stands On All Pops

Postby Gothamite » Wed Jan 24, 2018 12:02 am

runtodere wrote:I kind of like the pops without the stands actually.


We're discussing situations in which the Pops fall down. Pops that don't fall down don't need stands, obviously. ;)


Return to “Pop!”

Who is online

Users browsing this forum: Baidu [Spider]