Protectors?

We're not talking about soda, folks. This forum is dedicated to Funko's stylish Pop! series of vinyl figures, with or without springs.
Forum rules
This section is for general Pop discussion, not showing off your recent acquisitions. Please use the Dance Hall for collection addition pictures.

Please post Funko subscription box and item discussions in the Powered By Funko section.
horrorfunkoaddict
Posts: 2
Joined: Wed Dec 21, 2016 10:57 am

Protectors?

Postby horrorfunkoaddict » Tue Jun 20, 2017 9:45 am

Hi, I'm new here and was wondering, what are the best protectors to buy besides the stacks cause they too much, but I want good protection though too

User avatar
stl_ben
Posts: 451
Joined: Fri Jun 03, 2016 10:23 pm
Contact:

Re: Protectors?

Postby stl_ben » Tue Jun 20, 2017 9:51 am

IMO, stacks or bust. I just wait till there is a sale at Hot Topic and stock up then. Bought 3 for $10 there last month.
ImageImageImage

User avatar
jimma
Posts: 1399
Joined: Thu Sep 08, 2016 3:43 pm
Location: Massachusetts
Contact:

Re: Protectors?

Postby jimma » Tue Jun 20, 2017 10:05 am

stl_ben wrote:IMO, stacks or bust. I just wait till there is a sale at Hot Topic and stock up then. Bought 3 for $10 there last month.


This. I did the exact thing last month. Got 9 for 73 shipped i believe
ImageImageImageImage

User avatar
dishsnthings
Posts: 663
Joined: Thu Mar 12, 2015 2:12 pm
Location: Western MA

Re: Protectors?

Postby dishsnthings » Tue Jun 20, 2017 10:12 am

For hard protectors I've been buying Think Geeks at GS for $6.99. It's only once a while I need to for chases and such, so it's fairly affordable. The quality is near the same as the Stackers for $9.99. The nice thing is that every GS store has a bunch, and GS are every where. This can be important as opposed to ordering online. All it takes is one extra pillow, or mishandling, and you've got cracked cases!!
My Funko Craziness: Rides: 33 Hikari: 44 Large Pop!: 28
Small Pop!: 1407

User avatar
Nobody888
Posts: 387
Joined: Sun Jul 10, 2016 6:00 pm

Re: Protectors?

Postby Nobody888 » Tue Jun 20, 2017 10:29 am

i ordered my funko hard protectors from amazon when they were on sale. yes, some were cracked. however i just send them back and they replace them free of charge.

big_matt
Posts: 532
Joined: Sun Aug 09, 2015 12:17 pm
Location: NJ/NYC

Re: Protectors?

Postby big_matt » Tue Jun 20, 2017 10:31 am

dishsnthings wrote:For hard protectors I've been buying Think Geeks at GS for $6.99. It's only once a while I need to for chases and such, so it's fairly affordable. The quality is near the same as the Stackers for $9.99. The nice thing is that every GS store has a bunch, and GS are every where. This can be important as opposed to ordering online. All it takes is one extra pillow, or mishandling, and you've got cracked cases!!


I remember hearing that they were discontinuing the GS/TG hard protectors, although I could be wrong. At least, many stores by me never got restocked after they sold out. I took advantage of the Pro membership event a few weeks ago and bought what ever was in stock for BOGO 50%.
Pops: 1100+
Latest: Best Buy Arbiter
Wants: Freddy Fett, Red Skull, and many more

User avatar
Zero
Posts: 367
Joined: Mon Jul 13, 2015 12:54 pm
Location: Richmond, VA

Re: Protectors?

Postby Zero » Tue Jun 20, 2017 10:45 am

Like everyone said stacks are best. Sometimes you can get lucky with a great sale from HT or from an online retailer if not they get a little pricey if you by individually. Bulk is best
Hey I'm Chris
Fundays: 2015, 2017, 2018
Favorite Pop: Mad Hatter and Chernabog
Favorite Freddy: The 4th Doctor

User avatar
coopscohen
Posts: 1373
Joined: Fri May 19, 2017 2:13 am

Re: Protectors?

Postby coopscohen » Tue Jun 20, 2017 11:01 am

Hot Topic is cheap for Pop Stacks but you need Hot Cash for the discount. With unique codes now, that makes it harder unless you do shop at Hot Topic. If you have an FYE around, there pretty cheap as well. The have an ongoing Buy 2 Get the Third 75% off. If you have a membership card (not free) you get 10% off so around $16 for 3 before tax. These are the two places I buy from.
ImageImage

leosalion
Posts: 1138
Joined: Tue Aug 18, 2015 11:24 am
Location: Toronto
Contact:

Re: Protectors?

Postby leosalion » Tue Jun 20, 2017 11:13 am

The Ultra Pro protectors aren't bad and more durable than Stacks, since they crack after a fall. However I'd still go with Stacks since I like the stacking, look nicer, and even though they're roughly the same price you can find Stacks more commonly on sale

User avatar
Toronto
Posts: 988
Joined: Tue Jul 26, 2016 10:41 pm
Location: The Great White North
Contact:

Re: Protectors?

Postby Toronto » Tue Jun 20, 2017 1:41 pm

It is practically impossible to find hard stacks in the GTA.

No Hot Topic I've been to sells them - never received stock after last year and GameStop/EB games only carry the soft protectors. And I haven't seen a local online sale for them, so it typically 10 for 1.
ISO:Spidey/Pennywise/Mono Conans, Jubilee [Regular and 8-bit] & Scott Pilgrim Protos [Scott Common/Dorbz]
Dream Pops:New Sailor Moon wave, GITD Jubilee Pop, Kimono jacket Daniel from Karate Kid 2
Hopeful Next Funko Store Location?: The desperately needed Toronto, ON Canada #FunkoToronto
Recently Acquired Protos: Abscissa - Future Jubilee [Thanks PopTart], Scottie Barnes [T.DeLucca], Titania {L.C.]!
Image

User avatar
supertoygiant
Collector of the Month
Collector of the Month
Posts: 3841
Joined: Fri Nov 14, 2014 3:29 pm

Re: Protectors?

Postby supertoygiant » Tue Jun 20, 2017 1:47 pm

I use the soft vinyl ones, Had a bad experience with the hard plastic stacks. The lid crushed my SDCC Anger and never again will use those. :(

User avatar
Mister Piggy Wiggy
Posts: 3208
Joined: Tue Nov 01, 2016 11:31 pm

Re: Protectors?

Postby Mister Piggy Wiggy » Tue Jun 20, 2017 1:50 pm

I wonder about that myself. Lately I'm debating whether or not I should buy a few protectors from B & N.
29/Male/CHINESE


I love Pokemon, Gothic women, and Funko products. <3


I collect amazing fan signs like this!

User avatar
grilledeggplant
Posts: 597
Joined: Mon Nov 16, 2015 8:03 pm
Location: Springfield , OR

Re: Protectors?

Postby grilledeggplant » Tue Jun 20, 2017 2:10 pm

I've bought these really thick soft protector ones from this guy on eBay... really good, lmk if u want the sellers info! Sells them in bulk of 100 , 80 etc.
Image

User avatar
Imagery
Hall of Fame Class of 2022
Hall of Fame Class of 2022
Posts: 3446
Joined: Mon Aug 29, 2016 11:48 pm
Location: Toronto, Ontario, Canada
Contact:

Re: Protectors?

Postby Imagery » Tue Jun 20, 2017 2:22 pm

Toronto wrote:It is practically impossible to find hard stacks in the GTA.

No Hot Topic I've been to sells them - never received stock after last year and GameStop/EB games only carry the soft protectors. And I haven't seen a local online sale for them, so it typically 10 for 1.

If you're able to go, I think Eaton Centre HT just got a new stock. They usually sell out immediately when Hot Cash begins, but they do get/have them.
Funklub member 2016000004714 a.k.a. Sarah
ISO: Ursula, 1/24 Freddy Mad Hatter; NBC Zero Mopeez; Despicable Me 3 Target exclusive PSHs; Freddy Flux Winky and Smiley; HT & Walmart exclusive Disney Villains MMs
Funko events attended: 2016 Fright Night; 2017 & 2018 FDO — Canada; Funkon 2021; Fundays Teams 2017 — Justice League, 2018 — Goonies, 2019 — Loko Moko, 2021 — Proto Punks, 2022 — Pop Protectors

Image

User avatar
fbingha
Posts: 1764
Joined: Fri Apr 10, 2015 7:51 pm
Location: So Cal

Re: Protectors?

Postby fbingha » Tue Jun 20, 2017 2:31 pm

Compromise. Get the new .50 mm protectors.

http://www.retroprotection.com/Funko-Po ... s_c225.htm

(where I order mine from)
Image

User avatar
saban
Posts: 1062
Joined: Mon Jan 26, 2015 1:36 pm
Location: Bay Area

Re: Protectors?

Postby saban » Tue Jun 20, 2017 2:35 pm

I actually prefer the soft protectors. They take up less space (although this might not be an issue for most) and they protect the corners of the boxes perfectly fine for me. I'll have grails in the hard stacks but for most of my pops I use the regular pop protectors.
IG: vickyisodd
Image

User avatar
chaostryder
Posts: 1324
Joined: Tue Oct 27, 2015 2:17 pm
Location: Alberta, Canada

Re: Protectors?

Postby chaostryder » Tue Jun 20, 2017 2:57 pm

If you look up I've got protection for your pops by Tom Speakman on Facebook, his "tank" protectors are soft plastic but feel insanely durable
:freddy2:

Current ISO: Toucan Sam!


Past Events:
- Funko Fundays 2017, Funko HQ Grand Opening, Funko Fundays 2018

User avatar
methodsmadness
Posts: 1575
Joined: Tue Apr 11, 2017 12:06 am
Location: Los Angeles

Re: Protectors?

Postby methodsmadness » Tue Jun 20, 2017 2:57 pm

stl_ben wrote:IMO, stacks or bust. I just wait till there is a sale at Hot Topic and stock up then. Bought 3 for $10 there last month.



Wow! What kind of coupon/discount did you use?
Keep the MOTU line coming! :cherry:
Image Image Image Image Image Image

Alumencia
Posts: 135
Joined: Tue Jun 06, 2017 9:47 pm

Re: Protectors?

Postby Alumencia » Tue Jun 20, 2017 3:15 pm

This is good information, thanks. :) I just started using protectors and I had no idea there were so many potential options.

User avatar
Md-1
Posts: 108
Joined: Mon May 22, 2017 1:12 pm

Re: Protectors?

Postby Md-1 » Tue Jun 20, 2017 3:18 pm

The normal cheap vinyl ones are good for general pops.
Save the hard ones for your most prized pops.

Vinyl ones help against shelf wear and dust
Hard ones help against shelf wear dust and impact.
Tbh you shouldn't have pops in an area where they could take an impact but for your most valuable pops it's worth having just in case.

User avatar
stl_ben
Posts: 451
Joined: Fri Jun 03, 2016 10:23 pm
Contact:

Re: Protectors?

Postby stl_ben » Tue Jun 20, 2017 4:00 pm

methodsmadness wrote:
stl_ben wrote:IMO, stacks or bust. I just wait till there is a sale at Hot Topic and stock up then. Bought 3 for $10 there last month.



Wow! What kind of coupon/discount did you use?

Their buy 2 get 1 free promotion + $10 off from their rewards card.
ImageImageImage

Mauison
Posts: 677
Joined: Wed May 09, 2012 5:00 am
Location: Wailuku, Hawai`i

Re: Protectors?

Postby Mauison » Tue Jun 20, 2017 4:21 pm

chaostryder wrote:If you look up I've got protection for your pops by Tom Speakman on Facebook, his "tank" protectors are soft plastic but feel insanely durable


I buy all my Pop protectors from Tom I've Got Protection For Your Pops. He has many different sizes. It's usually easier to send him a list of the sizes and quantities you need and then he can send you a quote. He also sells the "tank" protectors. I haven't ordered any of those but those who have like them very much.

I'm an OOB collector but have all my empty boxes in the regular protectors since they stack really nice along my closet wall. Without the protectors, they're always leaning, especially since I think the boxes are 10+ rows high.

As for the Pop Stacks, it wouldn't be economical for me to put all of my boxes in them, nor do I think the boxes (especially commons) need that much protection. I actually only have one, that someone sent when I bought a Pop from them but it's empty right now.
Aloha, I'm David and I love everything Disney!!!

User avatar
keyese
Posts: 2920
Joined: Sat Jun 25, 2016 12:38 am
Location: Madison, WI
Contact:

Re: Protectors?

Postby keyese » Tue Jun 20, 2017 5:07 pm

I always buy the Stacks during Hot Cash, especially if I'm between dollar amounts needed to get to the next level. That might change a bit now that they are using unique codes for it.
AKA ElizabethKeyes on Twitch or keyese on Discord :freddy2:
ISO Mystery Minis!
Lord of the Rings: Eowyn (HT) and Lurtz (HT)
Avengers Endgame: 1/72 Hulk, 1/72 Hawkeye, 1/24 Black Widow (all Walmart exclusives)

User avatar
Nerdfulthingz
Posts: 989
Joined: Tue Jun 07, 2016 9:38 pm
Location: AZ
Contact:

Re: Protectors?

Postby Nerdfulthingz » Tue Jun 20, 2017 5:29 pm

There are some Pop "sleeves" that I've gotten off of Amazon, usually around $1.00 - $1.50 per sleeve. They are a softer plastic but keeps them from getting scratched up and offer some protection if it were to fall.
I just like smiling...smilings my favorite

Image

User avatar
jagpop
Posts: 3466
Joined: Thu Apr 14, 2016 3:24 pm
Location: So Cal

Re: Protectors?

Postby jagpop » Tue Jun 20, 2017 6:10 pm

I usually get the soft protectors from ebay. 100 for about $75 so it comes out to 75 cents each. If you wait for a coupon code, you can get 100 for $60. They work really well. Not as good as the Pop Stacks but still enough protectors for mobility without damage.
Image

I am not in danger, I am the danger! A guy opens his door and gets shot and you think that of me? No. I am the one who knocks!

User avatar
Wrudart
Posts: 474
Joined: Tue May 03, 2016 11:42 pm
Location: SE, Pennsylvania
Contact:

Re: Protectors?

Postby Wrudart » Tue Jun 20, 2017 7:33 pm

fbingha wrote:Compromise. Get the new .50 mm protectors.

http://www.retroprotection.com/Funko-Po ... s_c225.htm

(where I order mine from)



I highly recommend these .5 thickness ones they are very sturdy just got 20 of them last week and changed a few of my mid-high value pops into those. They're great!
:beerchug:

User avatar
akagalar
Posts: 1532
Joined: Fri Aug 01, 2014 1:40 pm
Location: California
Contact:

Re: Protectors?

Postby akagalar » Tue Jun 20, 2017 7:57 pm

Wrudart wrote:
fbingha wrote:Compromise. Get the new .50 mm protectors.

http://www.retroprotection.com/Funko-Po ... s_c225.htm

(where I order mine from)



I highly recommend these .5 thickness ones they are very sturdy just got 20 of them last week and changed a few of my mid-high value pops into those. They're great!


I have used the normal protectors from this place and they were fine. Didn't notice these thicker ones, might have to try them out.
Image Image

User avatar
dexiesmom
Posts: 2263
Joined: Wed May 17, 2017 11:49 am

Re: Protectors?

Postby dexiesmom » Tue Jun 20, 2017 8:53 pm

grilledeggplant wrote:I've bought these really thick soft protector ones from this guy on eBay... really good, lmk if u want the sellers info! Sells them in bulk of 100 , 80 etc.

I use these ones all the time too! Except I have hard cases for some of my more rare pieces (like yellow-dress Belle).
Image

User avatar
maythefunkobewithyou
Posts: 237
Joined: Wed Jan 18, 2017 3:09 am
Location: In A Galaxy Far, Far Away
Contact:

Re: Protectors?

Postby maythefunkobewithyou » Tue Jun 20, 2017 10:30 pm

Plenty of people and small businesses sell decent soft protectors (.3mm or 5mm) and buying like 50+ should end up costing you ~$1/ea.

User avatar
Krazydave2000
Posts: 1429
Joined: Sun Sep 04, 2016 3:14 am
Location: San Diego, CA
Contact:

Re: Protectors?

Postby Krazydave2000 » Tue Jun 20, 2017 10:48 pm

I use stacks and .50 Mm soft protectors. Both work awesome!
:freddy2:

Funko Patch & Pin Club Member
San Diego Chapter
Vest Up!!!!!!

User avatar
methodsmadness
Posts: 1575
Joined: Tue Apr 11, 2017 12:06 am
Location: Los Angeles

Re: Protectors?

Postby methodsmadness » Wed Jun 21, 2017 1:28 am

stl_ben wrote:
methodsmadness wrote:
stl_ben wrote:IMO, stacks or bust. I just wait till there is a sale at Hot Topic and stock up then. Bought 3 for $10 there last month.



Wow! What kind of coupon/discount did you use?

Their buy 2 get 1 free promotion + $10 off from their rewards card.


Ah, thanks!
Keep the MOTU line coming! :cherry:
Image Image Image Image Image Image

User avatar
mel
Posts: 650
Joined: Sat Oct 01, 2016 11:52 am
Location: San Diego
Contact:

Re: Protectors?

Postby mel » Wed Jun 21, 2017 1:46 am

I prefer the soft vinyl protectors. I used to get them from Retro Protection, but recently found a local guy who sells even nicer ones and he will deliver them to you for free. Can't beat it!
I'm a PBS Nerd!

Image

horrorfunkoaddict
Posts: 2
Joined: Wed Dec 21, 2016 10:57 am

Re: Protectors?

Postby horrorfunkoaddict » Wed Jun 21, 2017 9:53 am

Thank you so much everyone for your help, I appreciate it a lot :)

User avatar
brooklyn_geek
Posts: 2134
Joined: Thu Jun 18, 2015 11:24 pm
Location: Brooklyn, NY of Course!
Contact:

Re: Protectors?

Postby brooklyn_geek » Wed Jun 21, 2017 9:57 am

Just take em out of the boxes already... :D ;-)

User avatar
Libertyroxx
Posts: 2332
Joined: Fri Feb 19, 2016 2:09 pm
Location: Denver

Re: Protectors?

Postby Libertyroxx » Wed Jun 21, 2017 10:01 am

fbingha wrote:Compromise. Get the new .50 mm protectors.

http://www.retroprotection.com/Funko-Po ... s_c225.htm

(where I order mine from)



This. Personally, I use Pop stacks only for my rarest Pops, soft ones for commons and these heavy duty ones for everything else. Just my personal system, but these thicker protectors are excellent quality and a heck of a lot cheaper than the stacks.
Proud member of The United Funko Family @libertyroxx on IG
Fundays 2015-2019, 2022-2025
FDO 7 NYC FDO 8 Sacramento FDO 9 Las Vegas
Fright Night 1 & 2 , HQ Grand Opening, Making Fun Premier, Funko HWood Grand Opening, Funkon 1


Funklub member # 14829
Collections Star Wars, IRON MAIDEN :headbang: , Doctor Who, Marvel, Movies, Freddy Funko, Spastik/Fantastik Plastik

ImageImage

leosalion
Posts: 1138
Joined: Tue Aug 18, 2015 11:24 am
Location: Toronto
Contact:

Re: Protectors?

Postby leosalion » Wed Jun 21, 2017 10:06 am

Toronto wrote:It is practically impossible to find hard stacks in the GTA.

No Hot Topic I've been to sells them - never received stock after last year and GameStop/EB games only carry the soft protectors. And I haven't seen a local online sale for them, so it typically 10 for 1.


As far as I know, every HT in the GTA got a ton of stacks in a couple weeks ago. Some places should still have some left over, was at Eatons last week and they had 15-20 left if you're still looking.

User avatar
jeffcrazy
Posts: 538
Joined: Tue Apr 26, 2016 7:35 am
Location: SoCal

Re: Protectors?

Postby jeffcrazy » Wed Jun 21, 2017 10:23 am

I also like retroprotection... Dan makes custom sizes for basically every Funko product (POP!, Dorbz, Rides/z, 6", 9", 2/3/4-pack, Star Wars 3packs, Wobblers, Pocket Pops, etc etc etc) and all for a good price. And I'm also a big fan of their "heavy duty 4" Protector" - sturdy as a mofo and under $2 each.
Image

User avatar
Toronto
Posts: 988
Joined: Tue Jul 26, 2016 10:41 pm
Location: The Great White North
Contact:

Re: Protectors?

Postby Toronto » Wed Jun 21, 2017 11:44 am

leosalion wrote:
Toronto wrote:It is practically impossible to find hard stacks in the GTA.

No Hot Topic I've been to sells them - never received stock after last year and GameStop/EB games only carry the soft protectors. And I haven't seen a local online sale for them, so it typically 10 for 1.


As far as I know, every HT in the GTA got a ton of stacks in a couple weeks ago. Some places should still have some left over, was at Eatons last week and they had 15-20 left if you're still looking.


Would figure that I stop looking and asking for it and stock comes in.

Thanks Leo and Sarah!
ISO:Spidey/Pennywise/Mono Conans, Jubilee [Regular and 8-bit] & Scott Pilgrim Protos [Scott Common/Dorbz]
Dream Pops:New Sailor Moon wave, GITD Jubilee Pop, Kimono jacket Daniel from Karate Kid 2
Hopeful Next Funko Store Location?: The desperately needed Toronto, ON Canada #FunkoToronto
Recently Acquired Protos: Abscissa - Future Jubilee [Thanks PopTart], Scottie Barnes [T.DeLucca], Titania {L.C.]!
Image

User avatar
Mister Piggy Wiggy
Posts: 3208
Joined: Tue Nov 01, 2016 11:31 pm

Re: Protectors?

Postby Mister Piggy Wiggy » Wed Jun 21, 2017 12:05 pm

What's the best brand of protectors? I've been wondering about that.
29/Male/CHINESE


I love Pokemon, Gothic women, and Funko products. <3


I collect amazing fan signs like this!

User avatar
chaostryder
Posts: 1324
Joined: Tue Oct 27, 2015 2:17 pm
Location: Alberta, Canada

Re: Protectors?

Postby chaostryder » Wed Jun 21, 2017 1:37 pm

Mister Piggy Wiggy wrote:What's the best brand of protectors? I've been wondering about that.


Don't think there's an official "brand" as most of them are made in China and sold by retailers. If you scroll up and look at the link for Tom Speakman on Facebook his protectors are super tough and legit
:freddy2:

Current ISO: Toucan Sam!


Past Events:
- Funko Fundays 2017, Funko HQ Grand Opening, Funko Fundays 2018


Return to “Pop!”

Who is online

Users browsing this forum: No registered users