Removing Pricetag
Forum rules
This section is for general Pop discussion, not showing off your recent acquisitions. Please use the Dance Hall for collection addition pictures.
Please post Funko subscription box and item discussions in the Powered By Funko section.
This section is for general Pop discussion, not showing off your recent acquisitions. Please use the Dance Hall for collection addition pictures.
Please post Funko subscription box and item discussions in the Powered By Funko section.
- limitbreak12
- Posts: 59
- Joined: Fri Mar 17, 2017 12:18 pm
Removing Pricetag
Any tips on removing an old pricetag from the box itself (Paper Part not the plastic window) without damaging or taking a small part of the box.
the pricetag is on the part where the number on the front is.
the pricetag is on the part where the number on the front is.
Started Collecting:Feb 2017
POP! Count:97
PPG Est Value: 1,750.00$
Latest Grail: Non Bubble Zurg
Main Lines: Hanna Barbera ,Disney Wave 1-5 ,Overwatch

POP! Count:97
PPG Est Value: 1,750.00$
Latest Grail: Non Bubble Zurg
Main Lines: Hanna Barbera ,Disney Wave 1-5 ,Overwatch

- edmomo
- Posts: 1041
- Joined: Sat Nov 15, 2014 4:37 pm
- Location: Bay Area - CA
- Contact:
Re: Removing Pricetag
limitbreak12 wrote:Any tips on removing an old pricetag from the box itself (Paper Part not the plastic window) without damaging or taking a small part of the box.
the pricetag is on the part where the number on the front is.
You can always try to heat up the area with a hair dryer to loosen the glue and then slide in like a razor underneath to slip under. Then maybe real light use of goo-gone to get off the residue.
Instagram: thepop_life
















- limitbreak12
- Posts: 59
- Joined: Fri Mar 17, 2017 12:18 pm
Re: Removing Pricetag
edmomo wrote:limitbreak12 wrote:Any tips on removing an old pricetag from the box itself (Paper Part not the plastic window) without damaging or taking a small part of the box.
the pricetag is on the part where the number on the front is.
You can always try to heat up the area with a hair dryer to loosen the glue and then slide in like a razor underneath to slip under. Then maybe real light use of goo-gone to get off the residue.
the tag is a bit hard already but thanks for the tip would try it tommorow hopefully it can remove the price tag.
Started Collecting:Feb 2017
POP! Count:97
PPG Est Value: 1,750.00$
Latest Grail: Non Bubble Zurg
Main Lines: Hanna Barbera ,Disney Wave 1-5 ,Overwatch

POP! Count:97
PPG Est Value: 1,750.00$
Latest Grail: Non Bubble Zurg
Main Lines: Hanna Barbera ,Disney Wave 1-5 ,Overwatch

- akagalar
- Posts: 1532
- Joined: Fri Aug 01, 2014 1:40 pm
- Location: California
- Contact:
Re: Removing Pricetag
limitbreak12 wrote:edmomo wrote:limitbreak12 wrote:Any tips on removing an old pricetag from the box itself (Paper Part not the plastic window) without damaging or taking a small part of the box.
the pricetag is on the part where the number on the front is.
You can always try to heat up the area with a hair dryer to loosen the glue and then slide in like a razor underneath to slip under. Then maybe real light use of goo-gone to get off the residue.
the tag is a bit hard already but thanks for the tip would try it tommorow hopefully it can remove the price tag.
Good luck! Just remember the box is pretty fragile so go slow!

- emcee
- Posts: 2221
- Joined: Fri Feb 27, 2015 3:18 am
- Location: Vancouver BC
- Contact:
Re: Removing Pricetag
What kind of sticker is it? It really depends, some store stickers come off real easily, others are designed to give you headaches.
EB/GameStop and Hot Topic stickers peel off very easily for me.
EB/GameStop and Hot Topic stickers peel off very easily for me.
Collecting since 2013 (Jon Snow)
POP! Count: Stopped counting

POP! Count: Stopped counting

- kickinit
- Posts: 1301
- Joined: Mon May 16, 2016 4:52 am
- Location: SF Bay Area
Re: Removing Pricetag
Fast like a bandaid
I usually soak it lightly with some goo gone or thinner and peel slowly
- supertoygiant
- Collector of the Month

- Posts: 3841
- Joined: Fri Nov 14, 2014 3:29 pm
Re: Removing Pricetag
I use goo-gone. I soak it carefully to not get it on other parts of the box and let it sit for about 2 minutes, then the tag comes right off. Then with cloth rag with goo-gone on it you can remove the rest of the residue.
1st pop Marvel Thor bobble head and Captain America (2011) Walked into booth at SDCC and purchased in less than 5 minutes.
COTM 5/2019
FUNKLUB MEMBER #1893
1st dorbz Funko shop Freddy.
ISO CM Punk NIB or OOB
COTM 5/2019
FUNKLUB MEMBER #1893
1st dorbz Funko shop Freddy.
ISO CM Punk NIB or OOB
- Imagery
- Hall of Fame Class of 2022

- Posts: 3446
- Joined: Mon Aug 29, 2016 11:48 pm
- Location: Toronto, Ontario, Canada
- Contact:
Re: Removing Pricetag
I use a hair dryer when trying to remove any stickers. You just have to be careful of how much heat you apply at once to avoid warping the box/plastic. Just keep reapplying the hair dryer until it starts to peel off.
Funklub member 2016000004714 a.k.a. Sarah
ISO: Ursula, 1/24 Freddy Mad Hatter; NBC Zero Mopeez; Despicable Me 3 Target exclusive PSHs; Freddy Flux Winky and Smiley; HT & Walmart exclusive Disney Villains MMs
Funko events attended: 2016 Fright Night; 2017 & 2018 FDO — Canada; Funkon 2021; Fundays Teams 2017 — Justice League, 2018 — Goonies, 2019 — Loko Moko, 2021 — Proto Punks, 2022 — Pop Protectors

ISO: Ursula, 1/24 Freddy Mad Hatter; NBC Zero Mopeez; Despicable Me 3 Target exclusive PSHs; Freddy Flux Winky and Smiley; HT & Walmart exclusive Disney Villains MMs
Funko events attended: 2016 Fright Night; 2017 & 2018 FDO — Canada; Funkon 2021; Fundays Teams 2017 — Justice League, 2018 — Goonies, 2019 — Loko Moko, 2021 — Proto Punks, 2022 — Pop Protectors

- Sir Real
- Posts: 667
- Joined: Fri Aug 22, 2014 6:21 pm
- Location: Houston, TX
Re: Removing Pricetag
Yes to the heating up the sticker with a hair dryer to heat up, and loosen up the glue. But don't let that hot air hit the plastic window, or else it will warp.
But a BIG NO to going fast... Definitely go slow. Like, slow-motion slow. If you're pulling so slow that you're getting impatient, then that's the correct speed. Any faster means you're pulling too hard and then the surface paper could easily give way and tear before the glue gives way. And also slow down even further when you get to the very last part of the sticker that's attached. You will want to pull even softer. I've ripped surface paper at the very end by wanting to speed up.
Also another BIG NO to using a razor blade. That will always scratch. Use your fingernail gently, just to pry up the edge of the sticker to get started. Then grab that little up edge for pulling. As you pull, make sure to pull on the sticker as low as you can, grabbing it as close to the box surface as possible. the sticker will start to rull up on your finger as you go, and you should always be adjusting where you're holding on to the sticker for pulling.
And I've found that goo-gone (well, I use a different brand) will discolor the cardboard part of the box. But it's perfectly fine for the clear window.
But a BIG NO to going fast... Definitely go slow. Like, slow-motion slow. If you're pulling so slow that you're getting impatient, then that's the correct speed. Any faster means you're pulling too hard and then the surface paper could easily give way and tear before the glue gives way. And also slow down even further when you get to the very last part of the sticker that's attached. You will want to pull even softer. I've ripped surface paper at the very end by wanting to speed up.
Also another BIG NO to using a razor blade. That will always scratch. Use your fingernail gently, just to pry up the edge of the sticker to get started. Then grab that little up edge for pulling. As you pull, make sure to pull on the sticker as low as you can, grabbing it as close to the box surface as possible. the sticker will start to rull up on your finger as you go, and you should always be adjusting where you're holding on to the sticker for pulling.
And I've found that goo-gone (well, I use a different brand) will discolor the cardboard part of the box. But it's perfectly fine for the clear window.
- Nobody888
- Posts: 387
- Joined: Sun Jul 10, 2016 6:00 pm
Re: Removing Pricetag
supertoygiant wrote:I use goo-gone. I soak it carefully to not get it on other parts of the box and let it sit for about 2 minutes, then the tag comes right off. Then with cloth rag with goo-gone on it you can remove the rest of the residue.
this is what i use too. i typically use goo-gone or i might try a little bit of painter's soap depending where the sticker is
- HappinessGuano
- Posts: 1164
- Joined: Wed Jul 30, 2014 3:24 am
- Location: North Carolina
Re: Removing Pricetag
Goo Gone is good, just be sure not to scrub the box or else the ink will rub off after a little bit. If you just take a Q-tip and soak the sticker with it and let it sit for a bit the sticker should be easy to peel off, then you can just wipe off any excess oil.
Too soon?

- Tyr0ners
- Posts: 1081
- Joined: Sat Mar 11, 2017 3:53 pm
- Location: San Diego, CA
- Contact:
Re: Removing Pricetag
I always wondered about this myself. I have a couple pops I got from HT that has the price sticker on them. Time to find me some goo gone. Thanks OP for posting this and for everyone else suggesting some good ideas.
Hey there! My name is Tyrone.
Pop Collector of: Legendary Creatures and Myths, Spastik Plastik, Naruto and Fallout.



Pop Collector of: Legendary Creatures and Myths, Spastik Plastik, Naruto and Fallout.



- Dumplingbox
- Posts: 203
- Joined: Sun May 21, 2017 9:48 pm
- Location: Los Angeles, CA
- Contact:
Re: Removing Pricetag
An X-acto knife, steady hands, patience, and lower lip biting.
"Ain't no thing like me, except me!" - Rocket


- dishsnthings
- Posts: 663
- Joined: Thu Mar 12, 2015 2:12 pm
- Location: Western MA
Re: Removing Pricetag
Do you guys like removing ALL price stickers? Of course ones like the huge GS, Walmart ship to store and BN red dots have to come off. But I never bother with ones on the bottom. Like HT, they are so small and uniform. Just curious......
My Funko Craziness: Rides: 33 Hikari: 44 Large Pop!: 28
Small Pop!: 1407
Small Pop!: 1407
- limitbreak12
- Posts: 59
- Joined: Fri Mar 17, 2017 12:18 pm
Re: Removing Pricetag
dishsnthings wrote:Do you guys like removing ALL price stickers? Of course ones like the huge GS, Walmart ship to store and BN red dots have to come off. But I never bother with ones on the bottom. Like HT, they are so small and uniform. Just curious......
I do let prices on the bottom part of pops stay but if its on the other part of box specially infront itry my best to remove it
Started Collecting:Feb 2017
POP! Count:97
PPG Est Value: 1,750.00$
Latest Grail: Non Bubble Zurg
Main Lines: Hanna Barbera ,Disney Wave 1-5 ,Overwatch

POP! Count:97
PPG Est Value: 1,750.00$
Latest Grail: Non Bubble Zurg
Main Lines: Hanna Barbera ,Disney Wave 1-5 ,Overwatch

-
funkosundae
- Posts: 1090
- Joined: Mon May 22, 2017 8:20 pm
Re: Removing Pricetag
It's cool to leave the original price sticker on ... in a few years your reaction would be "That is all I paid for this one!" Cool!
-
TrippyPB1
- Posts: 57
- Joined: Fri Jul 15, 2016 4:35 pm
Re: Removing Pricetag
funkosundae wrote:It's cool to leave the original price sticker on ... in a few years your reaction would be "That is all I paid for this one!" Cool!
I agree with this. The only time I'll remove a sticker is if it's on the front "window " part or covering the name at the top on anyway. If it's on the bottom or back or top , meh not worth the trouble
Pop Count : 256
First Pop : Venom
Most Recent : Renly Baratheon
My Grail Pops : Notorious BIG, Beat up Jesse Pinkman
Most Wanted: White Walker GiTD
First Pop : Venom
Most Recent : Renly Baratheon
My Grail Pops : Notorious BIG, Beat up Jesse Pinkman
Most Wanted: White Walker GiTD
- akagalar
- Posts: 1532
- Joined: Fri Aug 01, 2014 1:40 pm
- Location: California
- Contact:
Re: Removing Pricetag
Since most tags are fairly easy to remove, I just go ahead an remove them.
I guess I like them "clean"
I guess I like them "clean"

- FerrisGuy3
- Posts: 1144
- Joined: Fri Oct 21, 2016 8:33 pm
- Location: Michigan
- Contact:
Re: Removing Pricetag
The way that I usually do it with tags from either Gamestop or Hot Topic is to rub the price tag. It' will heat up or loosen the adhesive and then slowly peel the tag off. If it doesn't come off just rub the tag to apply more heat.
Hi, I’m Tom. Michigan Based Funatic collecting since 2014
- coopscohen
- Posts: 1373
- Joined: Fri May 19, 2017 2:13 am
Re: Removing Pricetag
dishsnthings wrote:Do you guys like removing ALL price stickers? Of course ones like the huge GS, Walmart ship to store and BN red dots have to come off. But I never bother with ones on the bottom. Like HT, they are so small and uniform. Just curious......
Anywhere but the bottom of the box and my OCD gets the best of me.


-
blockablelaser
- Posts: 325
- Joined: Tue Sep 20, 2016 7:01 pm
- Location: SoCal
- Contact:
Re: Removing Pricetag
I leave most of mine on, doesn't really bother me unless like people said on the window or front part of the box for whatever reason
Blizzard Account: superninja #160808
Pop + Dorbz: 650 and growing
ISO: Unmasked jason; sulley+boo sdcc, Freddy Leatherface, rocky balboa, SDCC Sulley, SDCC Boo Berry
Pop + Dorbz: 650 and growing
ISO: Unmasked jason; sulley+boo sdcc, Freddy Leatherface, rocky balboa, SDCC Sulley, SDCC Boo Berry
-
Popspedia
- Posts: 33
- Joined: Tue Jun 20, 2017 4:40 am
- Location: Socal
- Contact:
Re: Removing Pricetag
I use a flat razor blade to peel a corner up, then just pull it off with my fingers. If the sticker rips you can peel the entire thing off with the blade. Just make sure to keep it completely flat or else you'll scratch the box. This works on the plastic and cardboard.
Popspedia.com - Funko Pop Collection Tracker & Value Tracker
Android and iOS Collection Tracker out now! Download from the Google Play Store and Apple App Store!
Android and iOS Collection Tracker out now! Download from the Google Play Store and Apple App Store!
- TriFeckTa
- Posts: 2706
- Joined: Tue Sep 20, 2016 3:11 pm
- Location: Little Saigon, California
- Contact:
Re: Removing Pricetag
I use goo gone or lighter fluid depending on how tough that sticker is. I wouldn't use a hairdryer if the sticker is on the number in the front of the pop, that could slightly warp the plastic. In this particular situation i would soak the sticker in lighter fluid using a Q-tip, then slowly peel. It should come off rather easy and if you box gets soaked in lighter fluid, just let it dry and don't scrub it off, that will ruin your box. It will dry without staining or leaving residue. If you are unsure about it, try looking up tutorials on youtube.
Hey there, I'm Michael and I am an Iron Man Junkie!
Iron Man POP! Collection (Production Pieces): COMPLETE
Iron Man Proto Count: 50
Iron Man Wacky Wobblers: IN PROGRESS
ISO: Gold Mark 2 Iron Man CHASE Wobbler, Gold Mark 1 Iron Man CHASE Wobbler, Gold and Silver 1/12 Freddy Stark Wobblers, and IRON MAN RELATED PROTOS
Check out my IG: @triifeckta


Iron Man POP! Collection (Production Pieces): COMPLETE
Iron Man Proto Count: 50
Iron Man Wacky Wobblers: IN PROGRESS
ISO: Gold Mark 2 Iron Man CHASE Wobbler, Gold Mark 1 Iron Man CHASE Wobbler, Gold and Silver 1/12 Freddy Stark Wobblers, and IRON MAN RELATED PROTOS
Check out my IG: @triifeckta


- Davinci
- Posts: 180
- Joined: Mon Nov 02, 2015 11:04 pm
- Location: New York
Re: Removing Pricetag
With such hardcore collectors and wanting the mint-est condition of even the boxes, I wonder if a Funko Pop Grading Company will ever start
.
- willy wonka
- Collector of the Month

- Posts: 5577
- Joined: Sun Aug 28, 2016 7:19 pm
- Location: Toronto, ON
Re: Removing Pricetag
Davinci wrote:With such hardcore collectors and wanting the mint-est condition of even the boxes, I wonder if a Funko Pop Grading Company will ever start.
Probably, I think it only a matter of time before Grading hits
Just call me Joe...


ISO: Freddy Mad Hatter LE 1/24, Mad Hatter Protos,
SDCC 4 Pack Dorbz(Found thanks to another Funatic)


ISO: Freddy Mad Hatter LE 1/24, Mad Hatter Protos,
SDCC 4 Pack Dorbz(Found thanks to another Funatic)
- Davinci
- Posts: 180
- Joined: Mon Nov 02, 2015 11:04 pm
- Location: New York
Re: Removing Pricetag
willy wonka wrote:Davinci wrote:With such hardcore collectors and wanting the mint-est condition of even the boxes, I wonder if a Funko Pop Grading Company will ever start.
Probably, I think it only a matter of time before Grading hits
The only issue is see with this is having to take the pop out of the box. Sometimes its quite difficult opening it as the flap gets stuck in between the fold. I sometimes end up making a little crease when opening.
- chaostryder
- Posts: 1324
- Joined: Tue Oct 27, 2015 2:17 pm
- Location: Alberta, Canada
Re: Removing Pricetag
Davinci wrote:willy wonka wrote:Davinci wrote:With such hardcore collectors and wanting the mint-est condition of even the boxes, I wonder if a Funko Pop Grading Company will ever start.
Probably, I think it only a matter of time before Grading hits
The only issue is see with this is having to take the pop out of the box. Sometimes its quite difficult opening it as the flap gets stuck in between the fold. I sometimes end up making a little crease when opening.
Use a ruler, slide it underneath the flap and through the over side, use a tiny bit of pressure and the top pops off perfectly

Current ISO: Toucan Sam!
Past Events:
- Funko Fundays 2017, Funko HQ Grand Opening, Funko Fundays 2018
- Davinci
- Posts: 180
- Joined: Mon Nov 02, 2015 11:04 pm
- Location: New York
Re: Removing Pricetag
Good tip! Thanks!
- Mister Piggy Wiggy
- Posts: 3208
- Joined: Tue Nov 01, 2016 11:31 pm
Re: Removing Pricetag
My advice is to go slowly, very slowly after examining the sticker itself. If the sticker's really old, then it might be best not to. And yes, I share your pain with the stickers.
29/Male/CHINESE
I love Pokemon, Gothic women, and Funko products. <3
I collect amazing fan signs like this!
- Funko_Don
- Posts: 637
- Joined: Mon May 01, 2017 5:50 pm
- Location: Goodyear, AZ
- Contact:
Re: Removing Pricetag
This may sound stupid, but if it's a newer sticker, I use pieces of the actual price tag to pull up glue residue once the paper part of the sticker is pulled away. I keep dabbing at the adhesive residue, with the adhesive left on the paper part, and it usually sticks to itself and pulls itself up.
Hope that made sense.
Hope that made sense.
WHAT AM I DOING?!?!?!








- wraithkelso
- Posts: 1907
- Joined: Tue Apr 10, 2012 2:35 am
- Location: Everett, Wa
- Contact:
Re: Removing Pricetag
I leave the sticker on if it is an exclusive since those are appropriately across he barcode anyway. But if it is a garvey gun sticker it is coming off. my local comic book store knows me well enough that they often won't even put a price sticker on mine. Thankfully they also put the stickers on the bottom of the box over the barcode
My Pop collection:
Disney: 297
Marvel: 53
Star Wars: 49
Harry Potter: 44
DC: 25
Animation: 11
Once Upon a Time: 9
Misc.: 28
Mystery Minis: 25
Rock-Candy: 12
Funko Games: 7
Dorbz: 5
Plush: 5
Hikari: 5
Vixens: 3
Soda: Roger Rabbit
Wobblers: Darth Vader
Disney: 297
Marvel: 53
Star Wars: 49
Harry Potter: 44
DC: 25
Animation: 11
Once Upon a Time: 9
Misc.: 28
Mystery Minis: 25
Rock-Candy: 12
Funko Games: 7
Dorbz: 5
Plush: 5
Hikari: 5
Vixens: 3
Soda: Roger Rabbit
Wobblers: Darth Vader
Who is online
Users browsing this forum: Google [Bot]
