Are you a finicky Funatic?
- Funkolicious
- Collector of the Month

- Posts: 1921
- Joined: Wed Feb 28, 2007 6:57 pm
- Location: Helotes, TEXAS
Are you a finicky Funatic?
Since this morning I have been tweaking and fine tuning my wobblers so they perform to my high level of wobbling expectations. I don't know about you guys, but it just kills me when they are afflicted with tilted heads, poor wobbling action and warped bases. Even though I keep them in their boxes for display, I have to know when I take them out of the box to play with them, they will look, stand and wobble correctly.
Most of the wobblers have the correct size ratio between the head and spring so it doesn't take too much work to straighten out the head and adjust the spring. A heat gun and cold water will take care of any warped bases. Wobblers like the Futurama set for example are a lost cause I'm afraid. After about an hour I was able to get Bender to dance and wobble quite nicely. Not so for Fry, Leela or Zoidberg......the heads are just too tiny for the spring. Mr. Howl and Nick DeVille also took some time to adjust with Nick requiring the use of an X-acto knife to remove a portion of PVC behind his chin. I had to take wire cutters to Mr. Howls spring.
So far, the only wobblers I have that required no adjustments straight out of the box, and wobble perfectly, are the Wacky Wiscracks. Even though they are small, they have the correct size ratio between the head and spring.
So what about you guys? Anyone else a finicky Funatic...or do you just put them on your shelf and let it go at that?
Bob
Most of the wobblers have the correct size ratio between the head and spring so it doesn't take too much work to straighten out the head and adjust the spring. A heat gun and cold water will take care of any warped bases. Wobblers like the Futurama set for example are a lost cause I'm afraid. After about an hour I was able to get Bender to dance and wobble quite nicely. Not so for Fry, Leela or Zoidberg......the heads are just too tiny for the spring. Mr. Howl and Nick DeVille also took some time to adjust with Nick requiring the use of an X-acto knife to remove a portion of PVC behind his chin. I had to take wire cutters to Mr. Howls spring.
So far, the only wobblers I have that required no adjustments straight out of the box, and wobble perfectly, are the Wacky Wiscracks. Even though they are small, they have the correct size ratio between the head and spring.
So what about you guys? Anyone else a finicky Funatic...or do you just put them on your shelf and let it go at that?
Bob
"Rookie of the Year" 2008
"COTM" Oct. 2008
"COTM" Oct. 2008
- Otto13
- Hall of Fame Class of 2005

- Posts: 1908
- Joined: Thu Apr 17, 2003 1:30 am
Bob,
You are a sick and twisted man! ...and I am your long lost brother! I have performed many a surgery on some of the old ones not because they weren't wobbling but because they weren't wobbling to my exact specifications. One needs a micrometer to know the exact torque and wobble ratio in order to correct the monodrome matrix control of the perfect wobble.
An important point (often missed) about logical wobbler integrity is that it is a feature of the seismic semantics of the entity-relationship schema, not of the underlying relational pull of the earth. It must be expressed abstractly in term of properties of multirelations, and not in term of the particular relational implementation of the entity-relationship schema. In other words does the spring make the wobble or does the wobble make the spring?
Yea, I play with mine...But I do it for the science...
You are a sick and twisted man! ...and I am your long lost brother! I have performed many a surgery on some of the old ones not because they weren't wobbling but because they weren't wobbling to my exact specifications. One needs a micrometer to know the exact torque and wobble ratio in order to correct the monodrome matrix control of the perfect wobble.
An important point (often missed) about logical wobbler integrity is that it is a feature of the seismic semantics of the entity-relationship schema, not of the underlying relational pull of the earth. It must be expressed abstractly in term of properties of multirelations, and not in term of the particular relational implementation of the entity-relationship schema. In other words does the spring make the wobble or does the wobble make the spring?
Yea, I play with mine...But I do it for the science...
New York ....................................Paris...............................Chula Vista
- Rat Fink Dennis
- Hall of Fame Class of 2010

- Posts: 6748
- Joined: Wed Feb 14, 2007 3:14 pm
- Location: ATL, GA
Typical guy......I take 'em (my wobblers) out and play with. 'em once in a while, but when it's returned the head has to be perfectly facing forward in the box.
I too also have to smack the heads about to make sure the action is up to par.
Had to edit a little. It sounded a little dirty to me.
I too also have to smack the heads about to make sure the action is up to par.
Had to edit a little. It sounded a little dirty to me.
ROTY CC 2007
COTM January 2008
COTY CC 2008
HOF CC 2010
LEMMY WOBBLER FOR '11
Founding member of the "WOW MOM" Crew '08

COTM January 2008
COTY CC 2008
HOF CC 2010
LEMMY WOBBLER FOR '11
Founding member of the "WOW MOM" Crew '08

- Funkolicious
- Collector of the Month

- Posts: 1921
- Joined: Wed Feb 28, 2007 6:57 pm
- Location: Helotes, TEXAS
Otto13 wrote:Bob,You are a sick and twisted man! ...and I am your long lost brother!
Well brother Otto, thank goodness I am not the only one that fine tunes their wobblers to perfection........It is evident you are the more intelligent sibling due to your superior vocabulary, however there is also indication of a higher level of insanity.
Denis wrote:I too also have to smack the heads about to make sure the action is up to par.
Dear Lord....I know I have been bad sometmes and I deserve much punishment, but I beg you, please do not reincarnate me into one of Denis's wobblers. The thought of being subjected to his five fingered head adjustment technique is more than I can bare....Amen
"Rookie of the Year" 2008
"COTM" Oct. 2008
"COTM" Oct. 2008
- Rat Fink Dennis
- Hall of Fame Class of 2010

- Posts: 6748
- Joined: Wed Feb 14, 2007 3:14 pm
- Location: ATL, GA
- Funkolicious
- Collector of the Month

- Posts: 1921
- Joined: Wed Feb 28, 2007 6:57 pm
- Location: Helotes, TEXAS
- Rat Fink Dennis
- Hall of Fame Class of 2010

- Posts: 6748
- Joined: Wed Feb 14, 2007 3:14 pm
- Location: ATL, GA
- Rat Fink Dennis
- Hall of Fame Class of 2010

- Posts: 6748
- Joined: Wed Feb 14, 2007 3:14 pm
- Location: ATL, GA
- prudemonkey
- Hall of Fame Class of 2008

- Posts: 1039
- Joined: Fri Aug 01, 2003 5:59 pm
- Location: Somewhere else
- Contact:
- Funkolicious
- Collector of the Month

- Posts: 1921
- Joined: Wed Feb 28, 2007 6:57 pm
- Location: Helotes, TEXAS
- Otto13
- Hall of Fame Class of 2005

- Posts: 1908
- Joined: Thu Apr 17, 2003 1:30 am
- Squird
- Hall of Fame Class of 2012

- Posts: 3793
- Joined: Thu Dec 15, 2005 10:12 pm
- Location: Kansas City, MO - More City, Less Kansas
- Rat Fink Dennis
- Hall of Fame Class of 2010

- Posts: 6748
- Joined: Wed Feb 14, 2007 3:14 pm
- Location: ATL, GA
That's the "Special Edition" Crackhead Phil DeGrave....hence the Twitch.Squird wrote:What's the best way to adjust the bobble to head ratio? (okay, that sounds awful).
I have a Phil Degrave that just sort of stands there and twitches when you try to get him to bobble.
Tap, twitch, tap, twitch.
ROTY CC 2007
COTM January 2008
COTY CC 2008
HOF CC 2010
LEMMY WOBBLER FOR '11
Founding member of the "WOW MOM" Crew '08

COTM January 2008
COTY CC 2008
HOF CC 2010
LEMMY WOBBLER FOR '11
Founding member of the "WOW MOM" Crew '08

- Funkolicious
- Collector of the Month

- Posts: 1921
- Joined: Wed Feb 28, 2007 6:57 pm
- Location: Helotes, TEXAS
-
kevinbuddha
- Hall of Fame Class of 2007

- Posts: 9418
- Joined: Mon Apr 28, 2003 11:06 am
- Location: Minnesota-where Sleestaks run free!
Denis wrote:That's the "Special Edition" Crackhead Phil DeGrave....hence the Twitch.Squird wrote:What's the best way to adjust the bobble to head ratio? (okay, that sounds awful).
I have a Phil Degrave that just sort of stands there and twitches when you try to get him to bobble.
Tap, twitch, tap, twitch.

Minnesota.....where the Sleestaks & Pakuni run free!
Funko's Official Historian
Funko's Official Historian
- Squird
- Hall of Fame Class of 2012

- Posts: 3793
- Joined: Thu Dec 15, 2005 10:12 pm
- Location: Kansas City, MO - More City, Less Kansas
kevinbuddha wrote:Denis wrote:That's the "Special Edition" Crackhead Phil DeGrave....hence the Twitch.Squird wrote:What's the best way to adjust the bobble to head ratio? (okay, that sounds awful).
I have a Phil Degrave that just sort of stands there and twitches when you try to get him to bobble.
Tap, twitch, tap, twitch.
Aahhhh.
That explains why stuff keeps disappearing, the weird middle of the night phone calls and all those skanky unemployed wobblers I find hanging out around the house when I come home from work.
Cripes! I'm an enabler!
-
ROBERT1313
- Posts: 282
- Joined: Fri Sep 02, 2005 11:53 pm
Just 3 minutes on high in the microwave and there are very easy to make adjustments to.Squird wrote:What's the best way to adjust the bobble to head ratio? (okay, that sounds awful).
I have a Phil Degrave that just sort of stands there and twitches when you try to get him to bobble.
Tap, twitch, tap, twitch.
I Ride Cannondale Super Six Evo Black Inc.
- Funkolicious
- Collector of the Month

- Posts: 1921
- Joined: Wed Feb 28, 2007 6:57 pm
- Location: Helotes, TEXAS
Squird wrote:What's the best way to adjust the bobble to head ratio? (okay, that sounds awful).
I have a Phil Degrave that just sort of stands there and twitches when you try to get him to bobble.
Tap, twitch, tap, twitch.
Thats strange...the Phils usually have really good wobbling action. I have an extra that wobbles like its supposed to, if you want to swap him for your crank induced ghetto wobbler just let me know...I'll send yours to rehab and get him on the path to clean wobbling.
Bob
"Rookie of the Year" 2008
"COTM" Oct. 2008
"COTM" Oct. 2008
- gregoman
- Hall of Fame Class of 2006

- Posts: 1952
- Joined: Tue Jan 06, 2004 1:39 pm
- Location: basement of the Alamo
- Contact:
- Funkolicious
- Collector of the Month

- Posts: 1921
- Joined: Wed Feb 28, 2007 6:57 pm
- Location: Helotes, TEXAS
- gregoman
- Hall of Fame Class of 2006

- Posts: 1952
- Joined: Tue Jan 06, 2004 1:39 pm
- Location: basement of the Alamo
- Contact:
Not tonight... No rains... Damn kids are making a bunch of noise... the girls are having some kind of reunion... The all leave to different schools in a few weeks...why do they gotta do that here!
Silly girls...I luv em' ... not I gotta take a few shots of Crown to help me sleep! Call you tomorrow pal!
Silly girls...I luv em' ... not I gotta take a few shots of Crown to help me sleep! Call you tomorrow pal!
I'm invisible!
- Funkolicious
- Collector of the Month

- Posts: 1921
- Joined: Wed Feb 28, 2007 6:57 pm
- Location: Helotes, TEXAS
- Funkolicious
- Collector of the Month

- Posts: 1921
- Joined: Wed Feb 28, 2007 6:57 pm
- Location: Helotes, TEXAS
Continuing the inspection and fine tuning of my wobblers...I finally took my jet car driving CC Space Cannibal out of it's box only to discover a one and half inch long glue trail that runs (inside) down the front of his helmet. It's as if he parked under a tree and was pooped on by some extraterrestrial pigeon.
How did this get past quality control?...Who thought this would be acceptable with collectors?...In the words of that famous ice skater..."Whyyyyy? Whyyyyy? Whyyyy?". I am in despair my finicky Funatics and am in need of your guidance. I just can't put him back on the shelf in such an undignified state.
How did this get past quality control?...Who thought this would be acceptable with collectors?...In the words of that famous ice skater..."Whyyyyy? Whyyyyy? Whyyyy?". I am in despair my finicky Funatics and am in need of your guidance. I just can't put him back on the shelf in such an undignified state.
"Rookie of the Year" 2008
"COTM" Oct. 2008
"COTM" Oct. 2008
- swobobafett
- Hall of Fame Class of 2007

- Posts: 4480
- Joined: Sat Apr 26, 2003 12:39 pm
- Location: The Wire, MD
- Contact:
- Funkolicious
- Collector of the Month

- Posts: 1921
- Joined: Wed Feb 28, 2007 6:57 pm
- Location: Helotes, TEXAS
- swobobafett
- Hall of Fame Class of 2007

- Posts: 4480
- Joined: Sat Apr 26, 2003 12:39 pm
- Location: The Wire, MD
- Contact:
- Alleycat
- HoF 2008 & CotY

- Posts: 9818
- Joined: Tue Mar 08, 2005 12:49 pm
- Location: Maitland, Florida
Funkolicious wrote: ...... quality control?....
My experience has shown that there appears to be minimal, if any quality control at the factory. As much as I love my Wacky Wobblers, each time I open a box is an gamble. For the life of me, I just can't understand why it is so difficult to glue a head on a post with a spring, then screw the spring on the neck - all while correctly aligning the components. It's not rocket science.
And how about checking to see that the body, base and head pieces aren't warped before sending them to the paint fairies.
I opened up all my Comic Con wobblers when I got back to my room. To my surprise, all were near perfect, except for the B&W Itchy - he had a warped base. I took him back the next day for an exchange, but after opening a few more boxes - all were like that.
Brian, I strongly suggest that you try to do something with the QC issue. Just a few changes on the training of the workers and on the production line (QC inspectors before painting, after painting, at final assembly, and at packing) could make a huge difference.
Now that you are going for wider distribution with all the new incredibly great licenses, now more than ever, you would want the Funko brand name to be known for Fun, Value AND Quality?
.
Craig here......
Craig here......
- Funkolicious
- Collector of the Month

- Posts: 1921
- Joined: Wed Feb 28, 2007 6:57 pm
- Location: Helotes, TEXAS
- Squird
- Hall of Fame Class of 2012

- Posts: 3793
- Joined: Thu Dec 15, 2005 10:12 pm
- Location: Kansas City, MO - More City, Less Kansas
Funkolicious wrote:Squird wrote:What's the best way to adjust the bobble to head ratio? (okay, that sounds awful).
I have a Phil Degrave that just sort of stands there and twitches when you try to get him to bobble.
Tap, twitch, tap, twitch.
Thats strange...the Phils usually have really good wobbling action. I have an extra that wobbles like its supposed to, if you want to swap him for your crank induced ghetto wobbler just let me know...I'll send yours to rehab and get him on the path to clean wobbling.
Bob
Thanks for the offer. I think if I'm to become a true funatic, I need to learn how to fix these things on my own (Or is that a Jedi? I get them confused) I've always wondered about adjusting their springs but been a little afraid of completely jacking them up. A little guidance would be great.
- Alleycat
- HoF 2008 & CotY

- Posts: 9818
- Joined: Tue Mar 08, 2005 12:49 pm
- Location: Maitland, Florida
Squird wrote:Funkolicious wrote:Squird wrote:What's the best way to adjust the bobble to head ratio? (okay, that sounds awful).
I have a Phil Degrave that just sort of stands there and twitches when you try to get him to bobble.
Tap, twitch, tap, twitch.
Thats strange...the Phils usually have really good wobbling action. I have an extra that wobbles like its supposed to, if you want to swap him for your crank induced ghetto wobbler just let me know...I'll send yours to rehab and get him on the path to clean wobbling.
Bob
Thanks for the offer. I think if I'm to become a true funatic, I need to learn how to fix these things on my own (Or is that a Jedi? I get them confused) I've always wondered about adjusting their springs but been a little afraid of completely jacking them up. A little guidance would be great.
I've had zero success. Every time I try to mess with a spring I screw it up even worse.
.
Craig here......
Craig here......
- Funkolicious
- Collector of the Month

- Posts: 1921
- Joined: Wed Feb 28, 2007 6:57 pm
- Location: Helotes, TEXAS
The most common method I have been using so far is to remove the head from the body......Look inside the head and see how off center the spring is in relation to the opening.......Then grab the spring and pull it out far enough, about 4 loops, and slip a butter knife between the loop closest to the head so it does not retract......Grab hold of the spring loop closest to the knife and bend it a little in the direction it requires to be centered......Remove knife and let spring retract back into the head....Observe if spring is centered.....If centered, then grab spring and reinsert knife leaving about 4 loops and then screw the body back on, remove knife and test wobbling action.....Repeat if necessary.
For warped bases or figures that lean on their bases....Just heat the base with a blow dryer until it is soft enough to make the reguired adjustments....Then put it under cold water, this will lock in place.
Hope this helps....Good luck!
For warped bases or figures that lean on their bases....Just heat the base with a blow dryer until it is soft enough to make the reguired adjustments....Then put it under cold water, this will lock in place.
Hope this helps....Good luck!
Last edited by Funkolicious on Sun Aug 05, 2007 4:38 pm, edited 1 time in total.
"Rookie of the Year" 2008
"COTM" Oct. 2008
"COTM" Oct. 2008
- ShoMeNodder
- HoF 2007 & CotD

- Posts: 20636
- Joined: Tue May 06, 2003 1:11 am
- Location: Gateway to the West
- Funkolicious
- Collector of the Month

- Posts: 1921
- Joined: Wed Feb 28, 2007 6:57 pm
- Location: Helotes, TEXAS
- Wacky_jeff
- Collector of the Month

- Posts: 1108
- Joined: Sun Apr 15, 2007 3:23 pm
- Location: NEbRasKA
kevinbuddha wrote:Denis wrote:That's the "Special Edition" Crackhead Phil DeGrave....hence the Twitch.Squird wrote:What's the best way to adjust the bobble to head ratio? (okay, that sounds awful).
I have a Phil Degrave that just sort of stands there and twitches when you try to get him to bobble.
Tap, twitch, tap, twitch.
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
i agree with him
- Funkolicious
- Collector of the Month

- Posts: 1921
- Joined: Wed Feb 28, 2007 6:57 pm
- Location: Helotes, TEXAS
Continuing my finicky ways.....I decided the only way to correct the glue stained helmet on my Space Cannibal was to replace the helmet. I found a plastic bulb, that was a little bigger than the stock helmet, at an arts and craft store....the bigger size allowed for the helmet to sit over the collar and also allow for complete wobbling action of the cannibal's head.
I used a clear glue that is used for car model kit windshields and plane canopies to glue the helmet halves together. Unfortunately my glue was over five years old and dried a little milky in color....So, I created on my computer a strip with rivets to cover up the seam...I then printed the design on water-slide decal paper. I'm happy with the over all effect.
The pictures were taken with a very low res digital camera...My wife confiscated our good one.

I used a clear glue that is used for car model kit windshields and plane canopies to glue the helmet halves together. Unfortunately my glue was over five years old and dried a little milky in color....So, I created on my computer a strip with rivets to cover up the seam...I then printed the design on water-slide decal paper. I'm happy with the over all effect.
The pictures were taken with a very low res digital camera...My wife confiscated our good one.

"Rookie of the Year" 2008
"COTM" Oct. 2008
"COTM" Oct. 2008
- TERRYSTOYHOUSE
- Collector of the Month

- Posts: 418
- Joined: Thu Aug 14, 2003 8:52 pm
- Location: LAFAYETTE INDIANA
- Rat Fink Dennis
- Hall of Fame Class of 2010

- Posts: 6748
- Joined: Wed Feb 14, 2007 3:14 pm
- Location: ATL, GA
- Funkolicious
- Collector of the Month

- Posts: 1921
- Joined: Wed Feb 28, 2007 6:57 pm
- Location: Helotes, TEXAS
Alleycat wrote:Great job. Looks as good or even better than original.
Maybe Brian needs to hire you and send you to China for a few months get the quality control program on track.
Wouldn't that be a fun job, Craig?.....Smelling all that PVC and seeing freshly made wobblers all over the place and grabbing all the protos you could want.
Had I used new glue I would not have had to make the decal. I really do like the fact that the bubble does not move....Seeing his head fully wobble inside the helmet is really cool.
Thanks for the comments guys!!
Bob
OH! and Dennis........Dirty little boy.

Last edited by Funkolicious on Fri Aug 10, 2007 6:48 pm, edited 1 time in total.
"Rookie of the Year" 2008
"COTM" Oct. 2008
"COTM" Oct. 2008
Who is online
Users browsing this forum: No registered users




