HELP! Potential Counterfeit Batman Bobble Chase

We're not talking about soda, folks. This forum is dedicated to Funko's stylish Pop! series of vinyl figures, with or without springs.
Forum rules
This section is for general Pop discussion, not showing off your recent acquisitions. Please use the Dance Hall for collection addition pictures.

Please post Funko subscription box and item discussions in the Powered By Funko section.
User avatar
Hopesdenial
Posts: 1428
Joined: Wed May 30, 2012 11:59 pm

HELP! Potential Counterfeit Batman Bobble Chase

Postby Hopesdenial » Thu Sep 15, 2016 3:21 am

Hello guys and gals,

Sorry for bugging about this but I recently purchased my last grail of the Batman Funko pops (purchased off eBay) and I noticed a couple of things off. I wanted to ask for everyones opinion on here since who would know better than my fellow Funatics. This is part of the message that I was writing in regards to the issue (doesn't include introduction and end).

The chase sticker on the Batman Vinyl Bobble-Head Funko is not the original; it's not even a replacement chase sticker from another pop. It's clearly a reprint (counterfeit). I have taken photos of the Funko I received and compared it to an actual chase (production run is from the same month and year). You can see that the quality of the sticker is reduced on the one I received from you (grain pattern, the shine, the edges, and the sticker itself having the appearance of being too thin). I have plenty of chases and all of the stickers do not look like the one I received from you. Due to the observation of the Chase sticker, I also compared the one I received from you with a regular Batman Vinyl Bobble-Head (production run is from the same month and year) and 2 other Funko Vinyl Batman Chases (the one mentioned previously, an error chase from an early production in 2012). The paint does not match the two other chases; the one I received from you is more vibrant than the other two. But giving the benefit of the doubt, the paint matches more like the 2010 SDCC Batgirl Funko Pop(if comparative pictures are required, please let me know). The worst thing that I can see about the pop I received from you involves the actual "bobble part". If you look at the bobble from the regular Batman Vinyl Bobble Head, the area of the head that leads to the inside is a clear "rotary" cut. This means that when it was in production that the head was created to have a clean look underneath; not jagged. The one that I received from you looks like it may have been cut with something to make the head gap open to become a Bobble-Head (i.e. - regular vinyl pops have a "base" connected to the neck which is glued to the head to make it a solid piece).

Potential Fake Chase Batman Bobble-Head Sticker

Image

Regular Vinyl Chase Batman Sticker

Image

Potential Fake Chase Batman Bobble-Head neck/bottom of head

Image

Regular Batman Bobble-Head neck/bottom of head

Image

***Added pictures***

Potential Fake

Image

Image

Actual regular vinyl chase

Image

Regular bobble-head

Image


Image

Production numbers - top right is regular bobble, bottom right is regular vinyl chase, left is chase bobble head

Image

***UPDATE*** 09/15/2016 @ 6:15PM


Ebay Message regarding refund request

Image

***Thank you everyone for your help; I guess you can't just determine if the product is legitimate based on "regular" pictures. Please be careful. If anyone knows of someone with a legitimate Batman Bobble-Head Chase... I'm interested :'(****

Please let me know what you guys think. I'm really leaning towards counterfeit simply based on how the head is cut. Thank you; I really appreciate everyone's help.

***update 9/18*** - I got the refund accepted. No questions asked.
Last edited by Hopesdenial on Sun Sep 18, 2016 11:50 pm, edited 5 times in total.
Image Image

"We come to this place for magic. We come to funkofunatic.com to laugh, to cry, to care. Because we need that, all of us."

Board name origin - I was an emo singer and guitarist; I'm not trying to sound mean lol

User avatar
Geescube
HoF 2016 & CotM
HoF 2016 & CotM
Posts: 6241
Joined: Fri Jul 20, 2012 11:53 pm

Re: HELP! Potential Counterfeit Batman Bobble Chase

Postby Geescube » Thu Sep 15, 2016 3:38 am

Its gunna help us to know where this came from. Just browsing I can see that the Last completed ebay sale shows a seller from AZ with a sticker that looks kinda like what youre showing us. This is very troubling since there are a few known fraudsters in that area that have been known to produce repaints with fake stickers. :(
Image

User avatar
Hopesdenial
Posts: 1428
Joined: Wed May 30, 2012 11:59 pm

Re: HELP! Potential Counterfeit Batman Bobble Chase

Postby Hopesdenial » Thu Sep 15, 2016 3:48 am

Hello, thank you for replying. It is the last completed listing on eBay. I only didn't mention it since I didn't want to falsely accuse if others believe it may be legitimate. I'm really leary based on the two things I noticed but it doesn't look like it was repainted though there are slight blemishes. The biggest thing that is bothering me is it looks like it could have potentially been a regular chase vinyl head "cut" to give the appearance of a normal bobble-head since the edges are jagged. Thank you for taking your time to reach out and providing insight and doing some research on it; what do you think the chances are that this is legitimate or counterfeit? I'm going to message them tomorrow in regards to this issue; at least about the sticker.

Geescube wrote:Its gunna help us to know where this came from. Just browsing I can see that the Last completed ebay sale shows a seller from AZ with a sticker that looks kinda like what youre showing us. This is very troubling since there are a few known fraudsters in that area that have been known to produce repaints with fake stickers. :(
Image Image

"We come to this place for magic. We come to funkofunatic.com to laugh, to cry, to care. Because we need that, all of us."

Board name origin - I was an emo singer and guitarist; I'm not trying to sound mean lol

User avatar
Geescube
HoF 2016 & CotM
HoF 2016 & CotM
Posts: 6241
Joined: Fri Jul 20, 2012 11:53 pm

Re: HELP! Potential Counterfeit Batman Bobble Chase

Postby Geescube » Thu Sep 15, 2016 4:11 am

Hopesdenial wrote:Hello, thank you for replying. It is the last completed listing on eBay. I only didn't mention it since I didn't want to falsely accuse if others believe it may be legitimate. I'm really leary based on the two things I noticed but it doesn't look like it was repainted though there are slight blemishes. The biggest thing that is bothering me is it looks like it could have potentially been a regular chase vinyl head "cut" to give the appearance of a normal bobble-head since the edges are jagged. Thank you for taking your time to reach out and providing insight and doing some research on it; what do you think the chances are that this is legitimate or counterfeit? I'm going to message them tomorrow in regards to this issue; at least about the sticker.


Gunna be honest here, I am not well-versed in the DC bobblehead chases. Not enough to decipher a fake v real neck base. Sorry. :( What alerted me about that auction is the location and the fact that youre concerned about a possible fake sticker. Like i said there is a HUGE HUGE HUGE well known AZ repaint/fake sticker culprit. I know that person works with others (like in large groups) to get that fake stuff sold. And i think their entire operations started with the fake stickers and then moved into metallic repaints. If this is indeed who im thinking about i wouldnt put it past them to do some type of hybrid-swap either. If that isnt the exact case it could be that someone bought it from the above referenced scammers thinking it was legit and now they are selling it still believing it to be.

Regardless, if this is indeed proven to be an replica, you can open a claim with Ebay and hopefully be able to win. I reached out to someone who sort of uncovered this individual's shady dealings. Maybe thy can shed a little more light on this. Im sorry i cant be more helpful, but do keep us updated. Im very interested to hear of your findings. Best of luck.
Last edited by Geescube on Thu Sep 15, 2016 4:28 am, edited 1 time in total.
Image

User avatar
angeladominguez
Posts: 2357
Joined: Thu Jun 04, 2015 2:32 am
Location: Houston, Texas
Contact:

Re: HELP! Potential Counterfeit Batman Bobble Chase

Postby angeladominguez » Thu Sep 15, 2016 4:27 am

I'm sorry for not being able to be more help.
But thank you for posting this!
It will definetly help others!

PanchoFCB
Posts: 160
Joined: Thu Apr 21, 2016 8:03 pm

Re: HELP! Potential Counterfeit Batman Bobble Chase

Postby PanchoFCB » Thu Sep 15, 2016 8:09 am

Oh wow. This is what sometimes keeps me from buying. And i might b off topic. But this is gonna help me b more careful now in the future. And also just keep an eye to see that really not everyone might b honest out there. I'm gonna go check all my chases stickers now guys... :/

User avatar
frankusho
Posts: 834
Joined: Wed Nov 06, 2013 10:30 am
Location: OH

Re: HELP! Potential Counterfeit Batman Bobble Chase

Postby frankusho » Thu Sep 15, 2016 10:19 am

Have you taken it out of the box yet? If so, does the paint feel tacky or rub off easily if you rub your finger against it?

You make a lot of good observations. As someone who has done a few metallic batman customs, I know that getting the metallic grey to match the original is very hard. The metallic grey paints that I've seen and used for hand-painting or airbrushing usually have a lighter finish, like metallic Batgirl.
Image
Image

User avatar
nyel24
Posts: 1150
Joined: Thu May 08, 2014 5:47 pm

Re: HELP! Potential Counterfeit Batman Bobble Chase

Postby nyel24 » Thu Sep 15, 2016 10:31 am

sorry to hear about this and i do hope it's legit but the sticker would be the first thing to throw me off about this. file a claim if you do not feel right about this.
Image

User avatar
Hopesdenial
Posts: 1428
Joined: Wed May 30, 2012 11:59 pm

Re: HELP! Potential Counterfeit Batman Bobble Chase

Postby Hopesdenial » Thu Sep 15, 2016 10:37 am

Honestly, you have been a lot of help and I really appreciate that you've taken your time to reach out to me and to look for someone else's too. I think I'm going to initiate the claim. To be honest, I'll probably request a refund/claim later on today just to see if anyone else adds anymore insight. But due to the price I paid for this Funko, any level of uncertainty merits a refund/claim. If I'm not 100% certain, I'll have in the back of my mind there's the chance it's a counterfeit . Thank you again; you've been really helpful.

Geescube wrote:
Hopesdenial wrote:Hello, thank you for replying. It is the last completed listing on eBay. I only didn't mention it since I didn't want to falsely accuse if others believe it may be legitimate. I'm really leary based on the two things I noticed but it doesn't look like it was repainted though there are slight blemishes. The biggest thing that is bothering me is it looks like it could have potentially been a regular chase vinyl head "cut" to give the appearance of a normal bobble-head since the edges are jagged. Thank you for taking your time to reach out and providing insight and doing some research on it; what do you think the chances are that this is legitimate or counterfeit? I'm going to message them tomorrow in regards to this issue; at least about the sticker.


Gunna be honest here, I am not well-versed in the DC bobblehead chases. Not enough to decipher a fake v real neck base. Sorry. :( What alerted me about that auction is the location and the fact that youre concerned about a possible fake sticker. Like i said there is a HUGE HUGE HUGE well known AZ repaint/fake sticker culprit. I know that person works with others (like in large groups) to get that fake stuff sold. And i think their entire operations started with the fake stickers and then moved into metallic repaints. If this is indeed who im thinking about i wouldnt put it past them to do some type of hybrid-swap either. If that isnt the exact case it could be that someone bought it from the above referenced scammers thinking it was legit and now they are selling it still believing it to be.

Regardless, if this is indeed proven to be an replica, you can open a claim with Ebay and hopefully be able to win. I reached out to someone who sort of uncovered this individual's shady dealings. Maybe thy can shed a little more light on this. Im sorry i cant be more helpful, but do keep us updated. Im very interested to hear of your findings. Best of luck.
Image Image

"We come to this place for magic. We come to funkofunatic.com to laugh, to cry, to care. Because we need that, all of us."

Board name origin - I was an emo singer and guitarist; I'm not trying to sound mean lol

User avatar
Hopesdenial
Posts: 1428
Joined: Wed May 30, 2012 11:59 pm

Re: HELP! Potential Counterfeit Batman Bobble Chase

Postby Hopesdenial » Thu Sep 15, 2016 10:50 am

Thank you for your advice. I'm trying not to open it due to the cost of the item (scared of damaging the box or insert by accident). Based on the head, the "shine" is a bit too vibrant compared to my regular chase and error (it looks more like the paint from the 2010 SDCC Batgirl). The body is fine other than a few blemishes. I may have to open it to just be certain. I'll add some more pictures of the pop later today. Thank you again for your advice.

frankusho wrote:Have you taken it out of the box yet? If so, does the paint feel tacky or rub off easily if you rub your finger against it?

You make a lot of good observations. As someone who has done a few metallic batman customs, I know that getting the metallic grey to match the original is very hard. The metallic grey paints that I've seen and used for hand-painting or airbrushing usually have a lighter finish, like metallic Batgirl.
Image Image

"We come to this place for magic. We come to funkofunatic.com to laugh, to cry, to care. Because we need that, all of us."

Board name origin - I was an emo singer and guitarist; I'm not trying to sound mean lol

User avatar
SnackDaddy
HoF 2017 & CotY
HoF 2017 & CotY
Posts: 3055
Joined: Thu Jul 12, 2012 8:40 pm
Location: Glendale, AZ
Contact:

Re: HELP! Potential Counterfeit Batman Bobble Chase

Postby SnackDaddy » Thu Sep 15, 2016 10:55 am

Yes, we do have a couple of scammers here in Arizona that repaint, re-box, and even re-sticker commons to look like "grails" pictures dont look too good to be honest
Houssein aka Huse aka SnackDaddy

Image

User avatar
Hopesdenial
Posts: 1428
Joined: Wed May 30, 2012 11:59 pm

Re: HELP! Potential Counterfeit Batman Bobble Chase

Postby Hopesdenial » Thu Sep 15, 2016 10:57 am

Thank you for your input :/. I hate that things have become so dishonest nowadays. I thought protos were the main issue with counterfeits but thus tops it for me. Thank you again :(.

SnackDaddy wrote:Yes, we do have a couple of scammers here in Arizona that repaint, re-box, and even re-sticker commons to look like "grails" pictures dont look too good to be honest
Image Image

"We come to this place for magic. We come to funkofunatic.com to laugh, to cry, to care. Because we need that, all of us."

Board name origin - I was an emo singer and guitarist; I'm not trying to sound mean lol

User avatar
SnackDaddy
HoF 2017 & CotY
HoF 2017 & CotY
Posts: 3055
Joined: Thu Jul 12, 2012 8:40 pm
Location: Glendale, AZ
Contact:

Re: HELP! Potential Counterfeit Batman Bobble Chase

Postby SnackDaddy » Thu Sep 15, 2016 11:00 am

Hopesdenial wrote:Thank you for your input :/. I hate that things have become so dishonest nowadays. I thought protos were the main issue with counterfeits but thus tops it for me. Thank you again :(.

SnackDaddy wrote:Yes, we do have a couple of scammers here in Arizona that repaint, re-box, and even re-sticker commons to look like "grails" pictures dont look too good to be honest


from a scammers perspective, there's more money to be made in making fake grails than protos. More people want these so called grails so better chance of selling it at prices similar to proto prices.
Houssein aka Huse aka SnackDaddy

Image

User avatar
poppetmaster
Posts: 3122
Joined: Tue Nov 10, 2015 11:54 am

Re: HELP! Potential Counterfeit Batman Bobble Chase

Postby poppetmaster » Thu Sep 15, 2016 11:09 am

There was something I bought a while back that was super iffy when it arrived...found out another member had bought two different things from the same guy that was iffy as well (his involved sticker issues). I won't name any names, but it wasn't the account that you bought that Batman from. But if you look at your Batman, the hole in the head should be smooth just like any other bobble head. What you need to do is open the box and look at the neck post and see if it is a long post with threads on it or if it is a normal post that has been shaved down and a spring wound onto it.

User avatar
dcooperfl
Posts: 1418
Joined: Thu Jul 16, 2015 2:00 am
Location: Austin, TX

Re: HELP! Potential Counterfeit Batman Bobble Chase

Postby dcooperfl » Thu Sep 15, 2016 11:34 am

poppetmaster wrote:What you need to do is open the box and look at the neck post and see if it is a long post with threads on it or if it is a normal post that has been shaved down and a spring wound onto it.


^^^ This. That would be hardest part to fake if it wasn't an original bobble. Also, is there a production date sticker on the bottom of the box? We know they stopped making these much earlier than the non-bobble so that could be telling as well.
Damien | Austin, TX | @dcooperfl

User avatar
Vinyl4Blood
Posts: 1815
Joined: Wed Jul 27, 2016 11:10 am
Location: Bakersfield, CA
Contact:

Re: HELP! Potential Counterfeit Batman Bobble Chase

Postby Vinyl4Blood » Thu Sep 15, 2016 12:17 pm

wow... that cut around the head does seem a little off.

And is that hot glue dripping down the head-post?

Stickers... in real life... printing can be off.... unless it's digitally printed... then it's usually spot on. And the cutting... usually from a die-press can be off. There is a variance of allowance that just sometimes happens. What I'm trying to say is... if I were making a fake sticker... i'd try to make it friggin perfect. And that's not perfect... that looks like a manufacturing offset.

I don't know man. I don't personally have a bobblehead batman to compare it to. So i don't know.

I am hoping that it's real though. I would hate to have you had purchased a fake. that would suck.
-They call me... Wes (AKA ScrappyMosier on Twitter & Vinyl4Blood on IG)
"OMG.. I need that"
Pop Grail wish list: Freddy Stark Pop and Comic Con 2009 "Big Fred" wobbler, Camp Fundays Freddy as Spartan. Any condition.

Image

User avatar
poppetmaster
Posts: 3122
Joined: Tue Nov 10, 2015 11:54 am

Re: HELP! Potential Counterfeit Batman Bobble Chase

Postby poppetmaster » Thu Sep 15, 2016 12:52 pm

Vinyl4Blood wrote:wow... that cut around the head does seem a little off.

And is that hot glue dripping down the head-post?

Stickers... in real life... printing can be off.... unless it's digitally printed... then it's usually spot on. And the cutting... usually from a die-press can be off. There is a variance of allowance that just sometimes happens. What I'm trying to say is... if I were making a fake sticker... i'd try to make it friggin perfect. And that's not perfect... that looks like a manufacturing offset.

I don't know man. I don't personally have a bobblehead batman to compare it to. So i don't know.

I am hoping that it's real though. I would hate to have you had purchased a fake. that would suck.


You're confused. The offset/imperfect sticker that you speak of is the legit Funko sticker. A lot of chase stickers are screwed up like that. The first one is the fake. As for the "glue"...that is on the legit Funko piece. It probably is glue.

User avatar
Vinyl4Blood
Posts: 1815
Joined: Wed Jul 27, 2016 11:10 am
Location: Bakersfield, CA
Contact:

Re: HELP! Potential Counterfeit Batman Bobble Chase

Postby Vinyl4Blood » Thu Sep 15, 2016 1:07 pm

poppetmaster wrote:
You're confused. The offset/imperfect sticker that you speak of is the legit Funko sticker. A lot of chase stickers are screwed up like that. The first one is the fake. As for the "glue"...that is on the legit Funko piece. It probably is glue.


You're right.. sorry.. I read the captions wrong. hmmm... then my point still stands. lol
-They call me... Wes (AKA ScrappyMosier on Twitter & Vinyl4Blood on IG)
"OMG.. I need that"
Pop Grail wish list: Freddy Stark Pop and Comic Con 2009 "Big Fred" wobbler, Camp Fundays Freddy as Spartan. Any condition.

Image

User avatar
meangene
HoF 2020 & CotM
HoF 2020 & CotM
Posts: 880
Joined: Thu Jun 06, 2013 9:07 pm
Location: Orlando
Contact:

Re: HELP! Potential Counterfeit Batman Bobble Chase

Postby meangene » Thu Sep 15, 2016 1:25 pm

Anymore pics of the box? When I get home I'll take some pics of my bobblehead batman (which isn't a chase) and my bobblehead joker chase. It's kind of hard for me to tell from those pics.
Gene

___________________________________________
Instagram meangene924

User avatar
Hopesdenial
Posts: 1428
Joined: Wed May 30, 2012 11:59 pm

Re: HELP! Potential Counterfeit Batman Bobble Chase

Postby Hopesdenial » Thu Sep 15, 2016 2:39 pm

Makes sense. It just sucks you know? Something I've been wanting for years. :/. Thanks for your help

SnackDaddy wrote:
Hopesdenial wrote:Thank you for your input :/. I hate that things have become so dishonest nowadays. I thought protos were the main issue with counterfeits but thus tops it for me. Thank you again :(.

SnackDaddy wrote:Yes, we do have a couple of scammers here in Arizona that repaint, re-box, and even re-sticker commons to look like "grails" pictures dont look too good to be honest


from a scammers perspective, there's more money to be made in making fake grails than protos. More people want these so called grails so better chance of selling it at prices similar to proto prices.
Image Image

"We come to this place for magic. We come to funkofunatic.com to laugh, to cry, to care. Because we need that, all of us."

Board name origin - I was an emo singer and guitarist; I'm not trying to sound mean lol

User avatar
Hopesdenial
Posts: 1428
Joined: Wed May 30, 2012 11:59 pm

Re: HELP! Potential Counterfeit Batman Bobble Chase

Postby Hopesdenial » Thu Sep 15, 2016 2:43 pm

Yea I'm afraid of opening it due to potentially damaging the box (hard to do but possible). The head looks like it was a normal vinyl and someone took an x-acto blade and carved it open. The inside part leading to the opening looks off and jagged. The body itself looks fine.I may have to open it just to get a proper analysis. Thanks for your help and input.

poppetmaster wrote:There was something I bought a while back that was super iffy when it arrived...found out another member had bought two different things from the same guy that was iffy as well (his involved sticker issues). I won't name any names, but it wasn't the account that you bought that Batman from. But if you look at your Batman, the hole in the head should be smooth just like any other bobble head. What you need to do is open the box and look at the neck post and see if it is a long post with threads on it or if it is a normal post that has been shaved down and a spring wound onto it.
Image Image

"We come to this place for magic. We come to funkofunatic.com to laugh, to cry, to care. Because we need that, all of us."

Board name origin - I was an emo singer and guitarist; I'm not trying to sound mean lol

User avatar
Hopesdenial
Posts: 1428
Joined: Wed May 30, 2012 11:59 pm

Re: HELP! Potential Counterfeit Batman Bobble Chase

Postby Hopesdenial » Thu Sep 15, 2016 2:46 pm

Yea it's scary. I paid 630 for it. If I wasn't staring at it and noticed the sticker I probably wouldn't have noticed. But the jagged edges leading to the whole in the head is just off putting. Thanks for your input.

Vinyl4Blood wrote:wow... that cut around the head does seem a little off.

And is that hot glue dripping down the head-post?

Stickers... in real life... printing can be off.... unless it's digitally printed... then it's usually spot on. And the cutting... usually from a die-press can be off. There is a variance of allowance that just sometimes happens. What I'm trying to say is... if I were making a fake sticker... i'd try to make it friggin perfect. And that's not perfect... that looks like a manufacturing offset.

I don't know man. I don't personally have a bobblehead batman to compare it to. So i don't know.

I am hoping that it's real though. I would hate to have you had purchased a fake. that would suck.
Image Image

"We come to this place for magic. We come to funkofunatic.com to laugh, to cry, to care. Because we need that, all of us."

Board name origin - I was an emo singer and guitarist; I'm not trying to sound mean lol

User avatar
Hopesdenial
Posts: 1428
Joined: Wed May 30, 2012 11:59 pm

Re: HELP! Potential Counterfeit Batman Bobble Chase

Postby Hopesdenial » Thu Sep 15, 2016 2:48 pm

Yea I'll post up a few in about 30mins. Thanks for your help. I have the regular bobble head toof and just the cut around the head... ugh....

meangene wrote:Anymore pics of the box? When I get home I'll take some pics of my bobblehead batman (which isn't a chase) and my bobblehead joker chase. It's kind of hard for me to tell from those pics.
Image Image

"We come to this place for magic. We come to funkofunatic.com to laugh, to cry, to care. Because we need that, all of us."

Board name origin - I was an emo singer and guitarist; I'm not trying to sound mean lol

User avatar
Hopesdenial
Posts: 1428
Joined: Wed May 30, 2012 11:59 pm

Re: HELP! Potential Counterfeit Batman Bobble Chase

Postby Hopesdenial » Thu Sep 15, 2016 2:59 pm

Just added. Thanks for your hell.

meangene wrote:Anymore pics of the box? When I get home I'll take some pics of my bobblehead batman (which isn't a chase) and my bobblehead joker chase. It's kind of hard for me to tell from those pics.
Image Image

"We come to this place for magic. We come to funkofunatic.com to laugh, to cry, to care. Because we need that, all of us."

Board name origin - I was an emo singer and guitarist; I'm not trying to sound mean lol

User avatar
Strending625
Collector of the Month
Collector of the Month
Posts: 2858
Joined: Sun Dec 06, 2015 9:42 am
Location: Echo Base, Hoth
Contact:

Re: HELP! Potential Counterfeit Batman Bobble Chase

Postby Strending625 » Thu Sep 15, 2016 5:01 pm

You can open a box without damaging it at all. Just stick a butter knife in the bottom flap, blade pointing in, and wiggle it down a little bit to open it. This is how I open my boxes and you don't get the "finger bend" in the box flap.
Brandon
Duty today for a funner tomorrow
Pops: More than my wife needs to know about lol

User avatar
MasterSplyntr
Posts: 4007
Joined: Thu Dec 11, 2014 9:23 pm
Location: Vancouver, BC, Canada
Contact:

Re: HELP! Potential Counterfeit Batman Bobble Chase

Postby MasterSplyntr » Thu Sep 15, 2016 5:22 pm

The only way to know for sure is to open it. Like Strending said, it can be done without damaging anything. You should be able to tell right away when you get him out. Unfortunately, there are definite parts that just don't look right. Really hopin' it's legit though!
I be Chris


Image

Mauison
Posts: 677
Joined: Wed May 09, 2012 5:00 am
Location: Wailuku, Hawai`i

Re: HELP! Potential Counterfeit Batman Bobble Chase

Postby Mauison » Thu Sep 15, 2016 5:28 pm

Strending625 wrote:You can open a box without damaging it at all. Just stick a butter knife in the bottom flap, blade pointing in, and wiggle it down a little bit to open it. This is how I open my boxes and you don't get the "finger bend" in the box flap.


This is what I do as well, works great.
Aloha, I'm David and I love everything Disney!!!

User avatar
Strending625
Collector of the Month
Collector of the Month
Posts: 2858
Joined: Sun Dec 06, 2015 9:42 am
Location: Echo Base, Hoth
Contact:

Re: HELP! Potential Counterfeit Batman Bobble Chase

Postby Strending625 » Thu Sep 15, 2016 5:53 pm

Here are some step by step pics to help. Just wiggle it a bit and it will come loose of the inner flaps. Hopefully you can get your money back quickly and find a real one for a couple hundred cheaper.
Image
Image
Image
Brandon
Duty today for a funner tomorrow
Pops: More than my wife needs to know about lol

User avatar
Vinyl4Blood
Posts: 1815
Joined: Wed Jul 27, 2016 11:10 am
Location: Bakersfield, CA
Contact:

Re: HELP! Potential Counterfeit Batman Bobble Chase

Postby Vinyl4Blood » Thu Sep 15, 2016 6:01 pm

you're doing it right... gathering as much intel & forensics as you can. And be prepared for a fight when you file the fraud claim. A buddy of mine on a facebook board sold a metallic vegita to someone, who replaced the metallic vegita with a regular vegita, and claimed that's what he was shipped. We all personally know and trust the seller.

So what I'm saying is... if this guy is a constant scammer.... he may have his own tactics ready in case his fraud gets discovered... and that tactic will probably be to say you swapped pops.

Just be ready for anything. Scammers have no shame.
-They call me... Wes (AKA ScrappyMosier on Twitter & Vinyl4Blood on IG)
"OMG.. I need that"
Pop Grail wish list: Freddy Stark Pop and Comic Con 2009 "Big Fred" wobbler, Camp Fundays Freddy as Spartan. Any condition.

Image

User avatar
Hopesdenial
Posts: 1428
Joined: Wed May 30, 2012 11:59 pm

Re: HELP! Potential Counterfeit Batman Bobble Chase

Postby Hopesdenial » Thu Sep 15, 2016 7:17 pm

Thanks for the advice. Usually I do it with a flat plastic card. I'm just worried because of the cost of the item and return process.

Strending625 wrote:Here are some step by step pics to help. Just wiggle it a bit and it will come loose of the inner flaps. Hopefully you can get your money back quickly and find a real one for a couple hundred cheaper.
Image
Image
Image
Image Image

"We come to this place for magic. We come to funkofunatic.com to laugh, to cry, to care. Because we need that, all of us."

Board name origin - I was an emo singer and guitarist; I'm not trying to sound mean lol

User avatar
The Junior is I
Posts: 162
Joined: Tue Jun 28, 2016 2:45 pm
Location: Hebron. KY

Re: HELP! Potential Counterfeit Batman Bobble Chase

Postby The Junior is I » Thu Sep 15, 2016 7:32 pm

Sorry, but as a person who has been scammed, the cut does make me suspicious. I hope you can get your money back. :(
WHY!!!!

Please help me find the Robocop Pop!

Image

User avatar
mindblowin02
Hall of Fame Class of 2012
Hall of Fame Class of 2012
Posts: 5009
Joined: Sun Jan 06, 2008 7:28 pm
Location: socal
Contact:

Re: HELP! Potential Counterfeit Batman Bobble Chase

Postby mindblowin02 » Thu Sep 15, 2016 7:59 pm

The only way to know is to open the box.

The glue thing, while I haven't seen that personally in pops, it did happen every once in awhile with wobblers.

User avatar
Hopesdenial
Posts: 1428
Joined: Wed May 30, 2012 11:59 pm

Re: HELP! Potential Counterfeit Batman Bobble Chase

Postby Hopesdenial » Thu Sep 15, 2016 9:11 pm

It's definitely fake. I feel like crap now... Thank you for giving me luck.

The Junior is I wrote:Sorry, but as a person who has been scammed, the cut does make me suspicious. I hope you can get your money back. :(
Image Image

"We come to this place for magic. We come to funkofunatic.com to laugh, to cry, to care. Because we need that, all of us."

Board name origin - I was an emo singer and guitarist; I'm not trying to sound mean lol

User avatar
Hopesdenial
Posts: 1428
Joined: Wed May 30, 2012 11:59 pm

Re: HELP! Potential Counterfeit Batman Bobble Chase

Postby Hopesdenial » Thu Sep 15, 2016 9:12 pm

I know; I was able to determine it was a fake. It just really sucks. It felt like Christmas. Thank you for your input and help.


mindblowin02 wrote:The only way to know is to open the box.

The glue thing, while I haven't seen that personally in pops, it did happen every once in awhile with wobblers.
Image Image

"We come to this place for magic. We come to funkofunatic.com to laugh, to cry, to care. Because we need that, all of us."

Board name origin - I was an emo singer and guitarist; I'm not trying to sound mean lol

User avatar
Vinyl4Blood
Posts: 1815
Joined: Wed Jul 27, 2016 11:10 am
Location: Bakersfield, CA
Contact:

Re: HELP! Potential Counterfeit Batman Bobble Chase

Postby Vinyl4Blood » Thu Sep 15, 2016 9:33 pm

Hopesdenial wrote:I know; I was able to determine it was a fake. It just really sucks. It felt like Christmas. Thank you for your input and help.


mindblowin02 wrote:The only way to know is to open the box.

The glue thing, while I haven't seen that personally in pops, it did happen every once in awhile with wobblers.


Sorry man. I honestly feel bad for you. I hope you can get your money back.
-They call me... Wes (AKA ScrappyMosier on Twitter & Vinyl4Blood on IG)
"OMG.. I need that"
Pop Grail wish list: Freddy Stark Pop and Comic Con 2009 "Big Fred" wobbler, Camp Fundays Freddy as Spartan. Any condition.

Image

User avatar
treswright
Posts: 6045
Joined: Mon May 25, 2015 4:11 am
Location: Dallas, TX
Contact:

Re: HELP! Potential Counterfeit Batman Bobble Chase

Postby treswright » Thu Sep 15, 2016 9:41 pm

I wouldn't bother worrying about the sticker, it's not going to prove anything one way or the other. It could be a real chase sticker off a newer chase. Also, isn't that metallic chase the same colors as the newer (non-bobble) chase? I have one and it looks like that. So it may not be a repaint, he may have taken a newer metallic chase and converted it to a bobble. So as the others said, the telltale sign should be the neck. Does the body post have the normal spiral groove in it? Does the post look molded to the body or like it was added on?

Also check the box closely to see if it looks right or like a re-print. Surely the bobble versions of the box are not easy to come by, but I'm not sure?

Good luck!
Howdy, I'm Tres :-)

Image

User avatar
hawkman2
Posts: 2175
Joined: Mon Jun 18, 2012 7:44 pm
Location: So Cal.

Re: HELP! Potential Counterfeit Batman Bobble Chase

Postby hawkman2 » Thu Sep 15, 2016 9:50 pm

What was the price you bought it for?

User avatar
Hopesdenial
Posts: 1428
Joined: Wed May 30, 2012 11:59 pm

Re: HELP! Potential Counterfeit Batman Bobble Chase

Postby Hopesdenial » Thu Sep 15, 2016 10:00 pm

$630 :/
Image Image

"We come to this place for magic. We come to funkofunatic.com to laugh, to cry, to care. Because we need that, all of us."

Board name origin - I was an emo singer and guitarist; I'm not trying to sound mean lol

User avatar
TenTwoSix
Posts: 1312
Joined: Mon Aug 27, 2012 3:47 am

Re: HELP! Potential Counterfeit Batman Bobble Chase

Postby TenTwoSix » Thu Sep 15, 2016 10:09 pm

Hopesdenial wrote:It's definitely fake. I feel like crap now... Thank you for giving me luck.

The Junior is I wrote:Sorry, but as a person who has been scammed, the cut does make me suspicious. I hope you can get your money back. :(


The pictures are definitely suspicious. How did you determine it's definitely fake? I'm sorry you're have to go through this. Some people really take the fun out of Funko. I hope you're able to get your money back.
Hi, I'm Jerry!

Image

User avatar
emk194
Posts: 2378
Joined: Tue Feb 09, 2016 3:58 pm
Location: Toronto, Canada

Re: HELP! Potential Counterfeit Batman Bobble Chase

Postby emk194 » Thu Sep 15, 2016 10:14 pm

I've been following this thread to learn more about how to spot fakes, so I'd also really like to know how you came to the conclusion that it's fake.

I sincerely hope you get your money back, though. There's some really lame crappy people out there.
Hey yo, I'm Elyn!


Return to “Pop!”

Who is online

Users browsing this forum: No registered users