Slanting Pops?
Forum rules
This section is for general Pop discussion, not showing off your recent acquisitions. Please use the Dance Hall for collection addition pictures.
Please post Funko subscription box and item discussions in the Powered By Funko section.
This section is for general Pop discussion, not showing off your recent acquisitions. Please use the Dance Hall for collection addition pictures.
Please post Funko subscription box and item discussions in the Powered By Funko section.
- cghantous88
- Posts: 278
- Joined: Fri Aug 12, 2016 1:18 pm
- Contact:
Slanting Pops?
Does anyone else have an issue with Pops slanting over? I have a Kelly Kapowski and she keeps leaning over no matter what I do. Is there anyway to fix this? When I originally took her out of the box she stood up perfectly straight, but now over time she's slanting and one foot is elevated..
- CaseyJones14
- HOF 2022 & CotM & CotY

- Posts: 10409
- Joined: Wed May 11, 2016 12:32 pm
- Location: Dorbztown, USA
Re: Slanting Pops?
viewtopic.php?f=62&t=47825
Some pretty good tips in that thread. I personally have a few POPs that don't stand and will be using the putty to make sure they don't fall over.
Some pretty good tips in that thread. I personally have a few POPs that don't stand and will be using the putty to make sure they don't fall over.

Brett - caseyj0nes14 on Instagram
ISO - Dorbz and McNugget Protos!
- pinklaquer
- Posts: 2464
- Joined: Mon Jul 25, 2016 1:03 pm
- Location: Phoenix, Arizona
- Contact:
- Squird
- Hall of Fame Class of 2012

- Posts: 3793
- Joined: Thu Dec 15, 2005 10:12 pm
- Location: Kansas City, MO - More City, Less Kansas
Re: Slanting Pops?
Female pops and figures with skinny legs are prone to falling over. So is my SDCC Doctor Strange. You can boil some water, turn down the heat once it's boiling, then soak the legs. Won't take but a good 10 count to get them soft. Straighten out the figure and hold while the figure cools and the legs hold the new position.
First time through is a little nerve racking.
PS - Don't reach into the water.
First time through is a little nerve racking.
PS - Don't reach into the water.
Funklub: 11181


- Shalee04
- Posts: 3072
- Joined: Fri Jun 03, 2016 2:18 pm
- Location: Bakersfield,Calif
- Contact:
Re: Slanting Pops?
I tell people the slanting ones are drunk. 
They call me Kelly
OOB deals I love to find.
Disney is my first love whether it be pops, Dorbz , minis or dolls.
Pops and Dorbz -2000+~~~ I have lost count actually
Minis-450+
Protos-2 Dug with cone from my first fundays in 2016
And
Baby Groot with bomb from 2018

OOB deals I love to find.
Disney is my first love whether it be pops, Dorbz , minis or dolls.
Pops and Dorbz -2000+~~~ I have lost count actually
Minis-450+
Protos-2 Dug with cone from my first fundays in 2016
And
Baby Groot with bomb from 2018

- ShockWaveZ55
- Posts: 562
- Joined: Tue Jan 26, 2016 9:49 pm
- Location: SoCal
Re: Slanting Pops?
This is happening to a couple of my pops. Katana from SS and Widowmaker from overwatch. Gonna try the hot water trick.
- wenhol8710
- Posts: 2086
- Joined: Sat Sep 20, 2014 2:18 pm
- Location: Flood City, PA
- Contact:
Re: Slanting Pops?
Squird wrote:Female pops and figures with skinny legs are prone to falling over. So is my SDCC Doctor Strange. You can boil some water, turn down the heat once it's boiling, then soak the legs. Won't take but a good 10 count to get them soft. Straighten out the figure and hold while the figure cools and the legs hold the new position.
First time through is a little nerve racking.
PS - Don't reach into the water.
I only recently got over my fear of trying this. It really does work great and I've boiled most of my worst offenders now.
You can also run the figure under cold water once you bend it into position to get it to set faster.
wenhol8710 on Instagram
- pinklaquer
- Posts: 2464
- Joined: Mon Jul 25, 2016 1:03 pm
- Location: Phoenix, Arizona
- Contact:
Re: Slanting Pops?
wenhol8710 wrote:Squird wrote:Female pops and figures with skinny legs are prone to falling over. So is my SDCC Doctor Strange. You can boil some water, turn down the heat once it's boiling, then soak the legs. Won't take but a good 10 count to get them soft. Straighten out the figure and hold while the figure cools and the legs hold the new position.
First time through is a little nerve racking.
PS - Don't reach into the water.
I only recently got over my fear of trying this. It really does work great and I've boiled most of my worst offenders now.![]()
You can also run the figure under cold water once you bend it into position to get it to set faster.
My husband tried this.... they started to lean again after a few months...

- wenhol8710
- Posts: 2086
- Joined: Sat Sep 20, 2014 2:18 pm
- Location: Flood City, PA
- Contact:
Re: Slanting Pops?
pinklaquer wrote:wenhol8710 wrote:Squird wrote:Female pops and figures with skinny legs are prone to falling over. So is my SDCC Doctor Strange. You can boil some water, turn down the heat once it's boiling, then soak the legs. Won't take but a good 10 count to get them soft. Straighten out the figure and hold while the figure cools and the legs hold the new position.
First time through is a little nerve racking.
PS - Don't reach into the water.
I only recently got over my fear of trying this. It really does work great and I've boiled most of my worst offenders now.![]()
You can also run the figure under cold water once you bend it into position to get it to set faster.
My husband tried this.... they started to lean again after a few months...
Yeah, it's not a permanent fix, the large heads eventually start to bend the body again. I've boiled Buffy twice now. But it's worth the couple minutes of boiling every few months to me instead of the daily toppling and falling.
wenhol8710 on Instagram
- cghantous88
- Posts: 278
- Joined: Fri Aug 12, 2016 1:18 pm
- Contact:
Re: Slanting Pops?
pinklaquer wrote:wenhol8710 wrote:Squird wrote:Female pops and figures with skinny legs are prone to falling over. So is my SDCC Doctor Strange. You can boil some water, turn down the heat once it's boiling, then soak the legs. Won't take but a good 10 count to get them soft. Straighten out the figure and hold while the figure cools and the legs hold the new position.
First time through is a little nerve racking.
PS - Don't reach into the water.
I only recently got over my fear of trying this. It really does work great and I've boiled most of my worst offenders now.![]()
You can also run the figure under cold water once you bend it into position to get it to set faster.
My husband tried this.... they started to lean again after a few months...
Originally my Kelly stood up straight and then after a few weeks began leaning..I think if I try to hot water repositioning it'll go back to leaning eventualy
- Squird
- Hall of Fame Class of 2012

- Posts: 3793
- Joined: Thu Dec 15, 2005 10:12 pm
- Location: Kansas City, MO - More City, Less Kansas
- Jezter
- Collector of the Month

- Posts: 5281
- Joined: Sat Jul 12, 2014 10:53 am
- Location: West Chester, PA
Re: Slanting Pops?
I ended up gluing Agent May and Charlie from Supernatural to their stands and they stay a lot better now. I do need to try the boiling trick with some other pops who's feet don't lay flat, causing them to topple or wobble...
Hey I'm John! 
Pops!- 860ish
Dorbz: 35
Mystery Minis: 34
Sodas: 7
Vinyl Idolz: 2
Hikari: 1
Mini-Hikari: 1
Instagram: courtjezter
This Is Where A Really Neat Signature Is Going To Go....Eventually...Maybe.
Pops!- 860ish
Dorbz: 35
Mystery Minis: 34
Sodas: 7
Vinyl Idolz: 2
Hikari: 1
Mini-Hikari: 1
Instagram: courtjezter
This Is Where A Really Neat Signature Is Going To Go....Eventually...Maybe.
- osakahedgehog3
- Posts: 256
- Joined: Thu Jul 28, 2016 2:37 pm
- Location: New York
- Contact:
Re: Slanting Pops?
The plastic stands have worked for my female pops and I've had mostly good luck with ones without them.
I did email Funko a while back, asking if it were possible to get some extra plastic stands since I'm pretty sure I accidentally threw some of them out when opening some, i.e. Agent Carter. Unfortunately, they told me that they wouldn't be able to do that for me.
I did email Funko a while back, asking if it were possible to get some extra plastic stands since I'm pretty sure I accidentally threw some of them out when opening some, i.e. Agent Carter. Unfortunately, they told me that they wouldn't be able to do that for me.
Funko Collection
All-Time Favorite Pop! Vinyl: WWE CM Punk - Hot Topic Edition
Favorite Most Recently Bought Pop! Vinyl: Aggretsuko 10" inch
Most Wanted Pop! Vinyl: Mono Conan O'Brien
All-Time Favorite Dorbz: Thanos XL
Favorite Most Recently Bought Dorbz: Iron Fist
Most Wanted Dorbz: Bullseye Batman
All-Time Favorite Pop! Vinyl: WWE CM Punk - Hot Topic Edition
Favorite Most Recently Bought Pop! Vinyl: Aggretsuko 10" inch
Most Wanted Pop! Vinyl: Mono Conan O'Brien
All-Time Favorite Dorbz: Thanos XL
Favorite Most Recently Bought Dorbz: Iron Fist
Most Wanted Dorbz: Bullseye Batman
- Sarcasticguy
- Hall of Fame Class of 2023

- Posts: 4535
- Joined: Tue Aug 11, 2015 6:07 pm
- Location: Phoenix, Arizona
- Contact:
Re: Slanting Pops?
wenhol8710 wrote:pinklaquer wrote:wenhol8710 wrote:
I only recently got over my fear of trying this. It really does work great and I've boiled most of my worst offenders now.![]()
You can also run the figure under cold water once you bend it into position to get it to set faster.
My husband tried this.... they started to lean again after a few months...
Yeah, it's not a permanent fix, the large heads eventually start to bend the body again. I've boiled Buffy twice now. But it's worth the couple minutes of boiling every few months to me instead of the daily toppling and falling.
We now just keep the really bad ones in their box... saves a lot of upset when they start to Michael Jackson
Hi, I'm Scott.
Instagram: @Sarcasticguy89

ISO:
Any Fallout Protos
Aliens Ellen Ripley Rock Candy Proto
Furiosa and Normal Immortan Joe Protos
SDCC '13 Bloody Predator Pop!
Retro Freddy Thor | Retro Freddy Skeletor
Instagram: @Sarcasticguy89

ISO:
Any Fallout Protos
Aliens Ellen Ripley Rock Candy Proto
Furiosa and Normal Immortan Joe Protos
SDCC '13 Bloody Predator Pop!
Retro Freddy Thor | Retro Freddy Skeletor
- treswright
- Posts: 6045
- Joined: Mon May 25, 2015 4:11 am
- Location: Dallas, TX
- Contact:
- Strending625
- Collector of the Month

- Posts: 2858
- Joined: Sun Dec 06, 2015 9:42 am
- Location: Echo Base, Hoth
- Contact:
Re: Slanting Pops?
And make sure if you are boiling pops be careful if you do it to a flocked one. They start to smell like wet dog and they get mats of if you don't brush them out right away 
Brandon
Duty today for a funner tomorrow
Pops: More than my wife needs to know about
Duty today for a funner tomorrow
Pops: More than my wife needs to know about
Who is online
Users browsing this forum: No registered users








