Life Size Freddy Fix Update

It don't mean a thing if it ain't got a spring. Come inside and chat about Funko Wacky Wobblers (bobble heads, for the less sophisticated).
User avatar
dork
Hall of Fame Class of 2012
Hall of Fame Class of 2012
Posts: 882
Joined: Sun May 08, 2005 11:51 pm
Location: Oceanside ends the ride. San Clemente comin' up!
Contact:

Life Size Freddy Fix Update

Postby dork » Tue Oct 11, 2005 4:56 pm

O. K. Curiosity got the best of me and I put my idea to the test....

IT WORKED!!! ...but not like i planned it.

I taped the hole where Freddy's head goes and shot the foam into the the orifice (that's for you alleycat!) in his shoes.I shot the first can in and let it settle for an hour or so. It took me 2-1/2 cans to fill him up.

When i checked him in the morning, I thought it had all cured, but when i flipped him upright the foam had not set on the bottom. It was just a big oozing mess. I then pulled the tape off his neck and poured out the uncured foam.

I went back a few hours later and the foam that was covering the side walls of Freddy had cured and expanded, forming a hard inner skeleton for the big man to lean on! The stuff filled and cured inside of his shoes and a little higher to completely stabilize that area.The rest of his body has about another inch to inch and a half of support.
Last edited by dork on Thu Oct 13, 2005 5:03 pm, edited 1 time in total.

User avatar
Alleycat
HoF 2008 & CotY
HoF 2008 & CotY
Posts: 9818
Joined: Tue Mar 08, 2005 12:49 pm
Location: Maitland, Florida

Re: Life Size Freddy Fix?

Postby Alleycat » Tue Oct 11, 2005 5:12 pm

dork wrote:All right... humor me here...

Home Depot carries this stuff called expanding hole and crack filler. It's a spray foam in a can that expands like crazy when you apply it. It dries up as a hard foam. What would happen if you filled Freddy's body with this stuff. I wonder if it would firm him up?

Perhaps these are the rantings of a deranged DORK!!!...or it just might work...


You may be on to something here, but I'm not sure it would be wise to shoot foam into any of Freddy's orifices until you hear from Brian. Just my :twocents: .... besides, I like to use the word "orifice". :lol:

User avatar
b00gedy
Posts: 728
Joined: Sun Mar 13, 2005 7:48 am
Location: Hawaii
Contact:

Postby b00gedy » Tue Oct 11, 2005 5:30 pm

I think that would work just make sure its compatibale with PVC... Shipping companys also use something similiar to package parts in boxes. Usually they wrap the part in plastic before sprayin the foam into the box.
Image
Tell me what he would say...

Funatic Bear
Collector of the Month
Collector of the Month
Posts: 1584
Joined: Tue Jun 01, 2004 2:32 pm

Postby Funatic Bear » Tue Oct 11, 2005 8:52 pm

Image

User avatar
b00gedy
Posts: 728
Joined: Sun Mar 13, 2005 7:48 am
Location: Hawaii
Contact:

Postby b00gedy » Tue Oct 11, 2005 10:11 pm

That sealant would make it about 700lbs, but it would work :D
Image

Tell me what he would say...

User avatar
dork
Hall of Fame Class of 2012
Hall of Fame Class of 2012
Posts: 882
Joined: Sun May 08, 2005 11:51 pm
Location: Oceanside ends the ride. San Clemente comin' up!
Contact:

Postby dork » Tue Oct 11, 2005 11:10 pm

This is the stuff
http://greatstuff.dow.com/greatstuff/cons/biggap.htm

I've used it before to dampen the noise around my tranny on an old Triumph Spitfire. It expands to fill a big area and is very light. I think I'm going to take a chance and try it.

mrfunkowacko
Collector of the Month
Collector of the Month
Posts: 1181
Joined: Thu Jun 23, 2005 2:28 pm
Location: T-Hill, Toronto
Contact:

Postby mrfunkowacko » Wed Oct 12, 2005 12:05 am

dork wrote:This is the stuff
http://greatstuff.dow.com/greatstuff/cons/biggap.htm

I've used it before to dampen the noise around my tranny on an old Triumph Spitfire. It expands to fill a big area and is very light. I think I'm going to take a chance and try it.



Oh ya that would work alright lolol good idea!!! Who is going to try it first ?lolol
FunKo 2006 Rookie of the Year!:smt032
Collector of the Month October 2006
mmmmm In-N-Out Burger!
RHR
Image

User avatar
b00gedy
Posts: 728
Joined: Sun Mar 13, 2005 7:48 am
Location: Hawaii
Contact:

Postby b00gedy » Wed Oct 12, 2005 12:11 am

Here's the stuff I was talking about...

http://www.sealedair.com/products/prote ... place.html
Image

Tell me what he would say...

User avatar
mrcory5000
Hall of Fame Class of 2006
Hall of Fame Class of 2006
Posts: 3741
Joined: Sun Apr 27, 2003 8:08 pm
Location: House of 5000
Contact:

Postby mrcory5000 » Wed Oct 12, 2005 2:19 am

In case your plan backfires, and Freddy explodes, please set up a camera to get the whole thing on tape.

Good luck though- I hope he doesn't go K-POW.

User avatar
xHEMLOCKx
Hall of Fame Class of 2009
Hall of Fame Class of 2009
Posts: 3601
Joined: Sun Mar 20, 2005 9:44 pm
Location: Huntsville, Al

Postby xHEMLOCKx » Wed Oct 12, 2005 7:54 am

i do not have a big freddy so do not know quite what we looks like up close but has anybody tried to put a bunch of sand in his base. the weight should be enough to keep him upright and you would not have to risk him blowing up either. again i do not know if this would work but thought it might be worth a shot.
Hi, I am Bo

Fame is vapor, popularity an accident, riches take wing. Only one thing endures and that is character. - Lincoln

We need Dr. Seuss and Peewee Herman POP!

User avatar
dork
Hall of Fame Class of 2012
Hall of Fame Class of 2012
Posts: 882
Joined: Sun May 08, 2005 11:51 pm
Location: Oceanside ends the ride. San Clemente comin' up!
Contact:

Postby dork » Thu Oct 13, 2005 5:25 pm

it worked...see my edited original post

User avatar
Alleycat
HoF 2008 & CotY
HoF 2008 & CotY
Posts: 9818
Joined: Tue Mar 08, 2005 12:49 pm
Location: Maitland, Florida

Re: Life Size Freddy Fix Update

Postby Alleycat » Thu Oct 13, 2005 7:27 pm

dork wrote:O. K. Curiosity got the best of me and I put my idea to the test....

IT WORKED!!! ...but not like i planned it.

I taped the hole where Freddy's head goes and shot the foam into the the orifice (that's for you alleycat!) in his shoes.I shot the first can in and let it settle for an hour or so. It took me 2-1/2 cans to fill him up.

When i checked him in the morning, I thought it had all cured, but when i flipped him upright the foam had not set on the bottom. It was just a big oozing mess. I then pulled the tape off his neck and poured out the uncured foam.

I went back a few hours later and the foam that was covering the side walls of Freddy had cured and expanded, forming a hard inner skeleton for the big man to lean on! The stuff filled and cured inside of his shoes and a little higher to completely stabilize that area.The rest of his body has about another inch to inch and a half of support.



You said "orifice"...... :-D :-D :-D :-D :-D

Glad you got Freddy to stand up, Dork!! 8)


Return to “Wacky Wobblers”

Who is online

Users browsing this forum: No registered users