Altering an existing Funko pop

We're not talking about soda, folks. This forum is dedicated to Funko's stylish Pop! series of vinyl figures, with or without springs.
Forum rules
This section is for general Pop discussion, not showing off your recent acquisitions. Please use the Dance Hall for collection addition pictures.

Please post Funko subscription box and item discussions in the Powered By Funko section.
windblown_song
Posts: 4
Joined: Tue Oct 25, 2016 7:24 pm

Altering an existing Funko pop

Postby windblown_song » Wed Oct 26, 2016 6:35 pm

Hey! I had a couple of questions for experienced Funko modders. I wanted to change my Hancock pop to match the character in the game Fallout 4 instead of the production art character. I thought about starting over with a base Funko but there's enough detail work on this pop that I don't really want to lose. What I do want to know is if there's a way to remove the hair he has. Should I just cut it off with an exacto, sand, and paint? When you have unwanted details on a Funko how do you remove them? Those lovely blonde locks need to go.

User avatar
edmomo
Posts: 1041
Joined: Sat Nov 15, 2014 4:37 pm
Location: Bay Area - CA
Contact:

Re: Altering an existing Funko pop

Postby edmomo » Wed Oct 26, 2016 6:39 pm

Instagram: thepop_life

Image
ImageImageImageImageImageImageImage

User avatar
Jango_Fresh
HoF 2015 & RotY
HoF 2015 & RotY
Posts: 7448
Joined: Wed Feb 22, 2012 4:42 pm
Location: Seattle, Wa

Re: Altering an existing Funko pop

Postby Jango_Fresh » Wed Oct 26, 2016 6:44 pm

If you plan on cutting hair I would suggest heating the pop up so the vinyl is softer. I don't own the pop so I don't know exactly what you need to do.

Does the hair feel solid or hollow?
2012 Rookie of the Year
Image

User avatar
Vinyl4Blood
Posts: 1815
Joined: Wed Jul 27, 2016 11:10 am
Location: Bakersfield, CA
Contact:

Re: Altering an existing Funko pop

Postby Vinyl4Blood » Wed Oct 26, 2016 7:36 pm

IF the vinyl at the hair is thick enough, then you can simply carve it away with an exacto knife.
The way to tell, is to remove the head (by warming it up in a mug of hot water for a minute or so)
Then run your finger around inside. If it feel smooth, then the hair portion is thick. If you can feel dips, then it is thin and you won't be able to carve it off.

You might need to use some clay or resin to fill in any low spots or pits. I prefer MagiSculpt resin.

Then sand it with 180 grit sandpaper or file.
Then sand with 400 grit
then 600 grit
then 800 grit
Then primer it.
Then sand it again to smooth it out.

At least, thats how I converted my DogMeat to DogPool. I had to carve away the little tufts of hair and smooth them out because they are supposed to be underneath a hood.

Image
-They call me... Wes (AKA ScrappyMosier on Twitter & Vinyl4Blood on IG)
"OMG.. I need that"
Pop Grail wish list: Freddy Stark Pop and Comic Con 2009 "Big Fred" wobbler, Camp Fundays Freddy as Spartan. Any condition.

Image

User avatar
CaseyJones14
HOF 2022 & CotM & CotY
HOF 2022 & CotM & CotY
Posts: 10409
Joined: Wed May 11, 2016 12:32 pm
Location: Dorbztown, USA

Re: Altering an existing Funko pop

Postby CaseyJones14 » Wed Oct 26, 2016 7:39 pm

Wes that Dogpool is awesome! Well done!
Image
Brett - caseyj0nes14 on Instagram
ISO - Dorbz and McNugget Protos!

User avatar
Vinyl4Blood
Posts: 1815
Joined: Wed Jul 27, 2016 11:10 am
Location: Bakersfield, CA
Contact:

Re: Altering an existing Funko pop

Postby Vinyl4Blood » Wed Oct 26, 2016 7:43 pm

CaseyJones14 wrote:Wes that Dogpool is awesome! Well done!


Thanks.

I was surprised at how thin I could get the MagicSculpt. That stuff is amazing. Holding the pop, you can't tell it's completely covered in resin.
-They call me... Wes (AKA ScrappyMosier on Twitter & Vinyl4Blood on IG)
"OMG.. I need that"
Pop Grail wish list: Freddy Stark Pop and Comic Con 2009 "Big Fred" wobbler, Camp Fundays Freddy as Spartan. Any condition.

Image

windblown_song
Posts: 4
Joined: Tue Oct 25, 2016 7:24 pm

Re: Altering an existing Funko pop

Postby windblown_song » Wed Oct 26, 2016 9:33 pm

Jango_Fresh wrote:If you plan on cutting hair I would suggest heating the pop up so the vinyl is softer. I don't own the pop so I don't know exactly what you need to do.

Does the hair feel solid or hollow?


I have to take the head off to know for sure but it feels fairly solid from the outside.

windblown_song
Posts: 4
Joined: Tue Oct 25, 2016 7:24 pm

Re: Altering an existing Funko pop

Postby windblown_song » Wed Oct 26, 2016 9:34 pm

Jango_Fresh wrote:If you plan on cutting hair I would suggest heating the pop up so the vinyl is softer. I don't own the pop so I don't know exactly what you need to do.

Does the hair feel solid or hollow?


I have to take the head off to know for sure but it feels fairly solid from the outside.

windblown_song
Posts: 4
Joined: Tue Oct 25, 2016 7:24 pm

Re: Altering an existing Funko pop

Postby windblown_song » Wed Oct 26, 2016 9:36 pm

[quote="Vinyl4Blood"]IF the vinyl at the hair is thick enough, then you can simply carve it away with an exacto knife.
The way to tell, is to remove the head (by warming it up in a mug of hot water for a minute or so)
Then run your finger around inside. If it feel smooth, then the hair portion is thick. If you can feel dips, then it is thin and you won't be able to carve it off.

Thanks. That definitely helps me get an idea where to go next. And your Dogpool does look really sharp.


Return to “Pop!”

Who is online

Users browsing this forum: Google [Bot]