Your display, the Funko way!

[schmeebel]

Kinners is great
I love the Megaman display-Way Cool

[TheJokersWifeHQ]

Finally got a tour of the entire collection done!

[Funkofan21]

I've been trying to get all my Funko POP!s , Dorbz, Hikari, Freddys, Wobblers, Blox, Minis, Ridez and Ridez displayed out of box for a while now. Hers where I'm at so far, I still have so much to do that's not pictured but I really like how this is looking so I wanted to share my progress with everyone!

Looks great so far! Only thing I’m not a fan of is the Packers gear Go Lions

GoPackGo!

Holy smokes!! now that's a neat collection!

[TheJokersWifeHQ]

[Chris23tian]

Great layout. That is a lot of Pops

[Complex24]

that's sick!

[jimma]

[Suntower11]

Wow! Great Collection! <3

[Random_sum1]

Wow that's impressive, I see most of them are placed by set I bet that's a nightmare when they come out with new ones, rearrange rearrange

[kappait]

Very nice collection! Some great pieces in there.

[runtodere]

Wow

[Brutesquad]

Wow, Awesome collection and set up!

I'm far too clumsy too have mine set up like that especially so close to the hallway entrance and the back of the couch..id have some smushed boxes for sure...!

[Nerdfulthingz]

It's like Funko Pop! Wallpaper!!! This is incredible!!

[funko_vinz]

Wow, that's an amazing setup!

[FunkoPoppinLockin]

Great setup. I may have some ideas now.

[Jonny0boy]

I currently living in RV and I only stock my chase Collection around my room. All my common and Exclusive is in storage at the moment till time to get new home.

[jkcohen626]

Just thought I would quote this again. I had seen some people above asking about risers and this is my favorite design. They're sturdy, easy to make and easy to customize if you have a different sized space (as I do). All credit goes to Wes (Vinyl4Blood) for the design, I am just a humble reposter.

Some of you have asked bout the risers I use inside my Detolf cases. They aren't anything special, but I think they work great, and they are pretty cheap... .compared to collecting pops anyway. I've been saying that I'll make a little tutorial once I finally get around to making more of them. I've been procrastinating, but I finally got around to building 12 new risers for my wife's Detolf cabinets. I based the design off the popular foam-board versions, found all over the internet that many of you use. I've never really been happy with how the foam-board versions turn out, and I wanted to use something a little stiffer that won't dent under the weight of the pops.

I switched to using 1/8" hardboard about 2 years ago, and was cutting them out on my CNC router, but have been having some issues with that lately, so I decided to cut these versions by hand. There are 4 levels, and they are short enough to leave room for pops between the risers and the door, so pops can sit on the glass shelf, giving you 5 rows of 6 pops each.

The risers are 9 1/2 inches deep, and 14 inches wide, so they fit perfectly inside an Ikea Detolf Case.
You can spray paint them if you like, but my wife likes the wood look, so they are au-naturale.

Each riser holds approx 30 OOB Pops, depending on their size.



or approx 35 Dorbz.


That translates into a Detolf case being able to hold about 150 OOB Pops.

My basic instructions:

Unit statement: Since I live in the US, I use feet and inches. So all of my measurements are in inches.

First, I start with a 24x48x1/8 inch "Hardboard sheet" from Home depot. About $5 per sheet. Each sheet gives me 2 riser units. So they end up costing about $2.50 for each shelf, or $12.50 for a set of 5 to use inside a Detolf case. You might be able to find a 24 x 24 sheet at your local store. A sheet of hardboard usually has one smooth side, and one VERY rough/waffle-like side. Obviously, you want the smooth side facing outward. Plus, the rough side loves hot glue.

Home Depot UPC for wood:


I start by drawing the Sides (stringers) and Slats (risers & steps) onto the board using a Drywall Square to make sure everything is nice and straight.





I then use a Band-Saw to cut out the shapes. If you don't have a Band-Saw, you can use a Jig-Saw or Scroll-Saw.
Tip #1: I can't make a straight cut if my life depended on it. So I add an extra 1/16" to my slat widths making them 2 7/16" wide instead of 2 3/8" wide. Then I use my sander to take out any wavey cuts I make and straighten them up.

Tip #2: When cutting the sides (stringers) you can lay two pieces of wood on top each other, tape them together (rough-side to rough-side) so they don't move, then cut them both at once. This guarantees your two sides are identical.



Once my pieces are all cut, I start building the risers.


Hot-Glue the Risers (vertical slats) to the Stringers (sides) first.
Then Hot-Glue the steps (flat slats) to the sides and top of the verticals.
The front of the step (blue in pic below) should align with the face of the riser. (green in pic below)





Once it's all glued, flip it over, and put a large dab of glue in each corner, and the middle of each long run. ... or anyplace you feel you want more glue. You can't use too much.



That's it. Place your Pops & Dorbz however your OCD desires.

[chincoteague1]

You have a wonderful collection. I enjoy following your presentations. Thank you.

[thejosh2010]

Very COOL!! Who needs dry wall when you got Funko walls Great video

[OffTheCHENG]

Question for everyone. Yesterday, I built a bookshelf and unboxed the majority of my collection (it was very liberating) and I have so much more room now. My question is, what risers do everyone use and where do you buy them? I know some people build them, but I am by no means handy or crafty nor do I have the resources to build them even if I wanted to try.

Hi Stu, I went to my local hardware store and bought cheap non-structural pine timber wide enough for the pop!s to fit on, check for straightness (you want the piece of timber as straight as possible). Just measure the length of your bookshelf and the hardware store maybe able to cut the pieces to length that you want (small fee??). I screwed them together but you don't have to. Paint them white (a few coats) to make the pop!s stand out and stack them to fit. I have done this for all my Star Wars figures and Pop!s. Good luck and post pics.

As a Star Wars fan...these pictures brings me joy! I'm loving the display and pops!

[Luckynala323]

Finally took a pic of phase 1 of the Walmart Bookcase experiment. So far so good, 120 Pops per case, 60 per side. Only like 16 more cases to go . : ) https://www.instagram.com/p/BdtpjiPh4h- ... ckynala323

[Luckynala323]

Finally took a pic of phase 1 of the Walmart Bookcase experiment. So far so good, 120 Pops per case, 60 per side. Only like 16 more cases to go . : ) https://www.instagram.com/p/BdtpjiPh4h- ... ckynala323

Sorry one day I will get the image to attach correctly without using a link. Dang it!

[schmeebel]

KMFH11
That’s dedication.

[schmeebel]

Stu. Yours rocks too. The white backing/lights gives it a nice museum quality.
Mine I’d black, and is so lacking

[sdcccrasher]

So many great displays and ideas ... and thanks jk for the re-post!

[cypress]

So I just joined the forums last Friday. I been collecting since beginning of November. Started with just Solider 76 and DVA Pop and then spread to Assassins Creed. Shortly after the addiction has kicked in.

I got the Ikea shelf put up a couple weeks ago and finally took some Pops out of the box. I am finishing up my origanization. Purging the office of stuff so that I can have more room to display. I can get real OCD on how things look. So this is always subject to change.

Sorry about the darkness of the Pic. I literally took this around 1:00am.

[Njtree_82]

wow just wow......

[chincoteague1]

Finally took a pic of phase 1 of the Walmart Bookcase experiment. So far so good, 120 Pops per case, 60 per side. Only like 16 more cases to go . : ) https://www.instagram.com/p/BdtpjiPh4h- ... ckynala323

Your collection and display is exceptional. Thank you for sharing and please post more pictures as you continue.

[chincoteague1]

So I just joined the forums last Friday. I been collecting since beginning of November. Started with just Solider 76 and DVA Pop and then spread to Assassins Creed. Shortly after the addiction has kicked in.

I got the Ikea shelf put up a couple weeks ago and finally took some Pops out of the box. I am finishing up my origanization. Purging the office of stuff so that I can have more room to display. I can get real OCD on how things look. So this is always subject to change.

Sorry about the darkness of the Pic. I literally took this around 1:00am.

Congratulations on your new collection.

[dorbz]

I've been trying to get all my Funko POP!s , Dorbz, Hikari, Freddys, Wobblers, Blox, Minis, Ridez and Ridez displayed out of box for a while now. Hers where I'm at so far, I still have so much to do that's not pictured but I really like how this is looking so I wanted to share my progress with everyone!

Awesome GB collection.

An estimate of how much you paid for all the Freddies?

[KMFH11]

I've been trying to get all my Funko POP!s , Dorbz, Hikari, Freddys, Wobblers, Blox, Minis, Ridez and Ridez displayed out of box for a while now. Hers where I'm at so far, I still have so much to do that's not pictured but I really like how this is looking so I wanted to share my progress with everyone!

Awesome GB collection.

An estimate of how much you paid for all the Freddies?

No idea

[Officerdorbz]

Some updated pictures.

[conventiongeek]

Great Disney collection... nice to see a dorbz collection over the typical Pops! Still love my Pops however... nice!

[conventiongeek]

Great Disney collection... nice to see a dorbz collection over the typical Pops! Still love my Pops however... nice!

[sdcccrasher]

Some updated pictures.

Superb Officerdorbz. I love the lavender background and the presentation is impeccable.
Congrats ... Absolute Awesomeness!!!

[Schl0]

Amazing collection and display, Officerdorbz!! I need to find me those AoT Dorbz. A little bummed the Colossal Titan isn’t an XL Dorbz tho.

[funkopop_princess86]

Awesome collection!! I just started getting into collecting Dorbz. I have been collecting only Pops until I bought my first Dorbz and now I am hooked!!

[Fawk]

I have done some re-arranging and additions since my last collection post. I had to thin out some of the series I collect due to Star Wars dominating my shelves.

[skampers]

Wow Fawk, amazing dispay! Do you have every Batman? :o

[Fawk]

Wow Fawk, amazing dispay! Do you have every Batman? :o

Thanks! I don't have the Patina, 9 inch, chase of the original, or the blue batmobile. (I think those are all the ones I am missing)