Harry Potter S3 MM

Great things come in mysterious miniature or pint sized packages, but which great thing will it be? It's all a mystery until you open one. Then the fun begins.
User avatar
MattyPHATty
Posts: 2151
Joined: Sun Oct 02, 2016 8:37 pm

Re: Harry Potter S3 MM

Postby MattyPHATty » Mon Jul 02, 2018 12:25 am

dexiesmom wrote:
MattyPHATty wrote:
Katers wrote:
Yeah, I'd much rather the cases that have a layout have the sweet spots be either in the back, or on the bottom. When you get the random lookee-loos that find a case through sheer dumb luck, chances are good they'll just snag from the front of the case. At least with Target, I don't think the employees are concerned with them enough to mess up the layout. Good luck finding an untouched case!

Completely agree, it makes it really tough when the good stuff is top front. It made finding the LotR really hard, especially at HT’s where the good ones were always top front right, just like these. If you don’t find a fresh case, odds are it’s not even worth your time

This is true. But I guess from Funko's perspective if that random person got a really good one they might want to start collecting to complete the set?

Most definitely. I would say someone would be a lot less likely to buy another one if the first ones they get are all 1/6’s, unless that’s the character(s) they were hoping to pull. It’s definitely a fine balance for Funko
Image

User avatar
Katers
Posts: 8471
Joined: Thu Jun 09, 2016 3:12 pm
Location: Orange County, CA
Contact:

Re: Harry Potter S3 MM

Postby Katers » Mon Jul 02, 2018 1:06 am

dexiesmom wrote:
MattyPHATty wrote:
Katers wrote:
Yeah, I'd much rather the cases that have a layout have the sweet spots be either in the back, or on the bottom. When you get the random lookee-loos that find a case through sheer dumb luck, chances are good they'll just snag from the front of the case. At least with Target, I don't think the employees are concerned with them enough to mess up the layout. Good luck finding an untouched case!

Completely agree, it makes it really tough when the good stuff is top front. It made finding the LotR really hard, especially at HT’s where the good ones were always top front right, just like these. If you don’t find a fresh case, odds are it’s not even worth your time

This is true. But I guess from Funko's perspective if that random person got a really good one they might want to start collecting to complete the set?


Oh, completely agree for the newbies. It must be super exciting if, on their first pull, they snag one of the hard to find ones! I can remember how excited I was when I opened a McGonagall cat, or a Yule Ball Hermione! That's where I like the exclusives being 1/12. Flippers won't completely decimate the cases for those (at least, not that I've seen), and you still get people super excited to snag an exclusive. And we die-hard collectors don't need to pull multiple difficult figures so that we have trade bait later!
Image ImageImage Image

User avatar
Katers
Posts: 8471
Joined: Thu Jun 09, 2016 3:12 pm
Location: Orange County, CA
Contact:

Re: Harry Potter S3 MM

Postby Katers » Mon Jul 02, 2018 1:11 am

MattyPHATty wrote:
dexiesmom wrote:
MattyPHATty wrote:Completely agree, it makes it really tough when the good stuff is top front. It made finding the LotR really hard, especially at HT’s where the good ones were always top front right, just like these. If you don’t find a fresh case, odds are it’s not even worth your time

This is true. But I guess from Funko's perspective if that random person got a really good one they might want to start collecting to complete the set?

Most definitely. I would say someone would be a lot less likely to buy another one if the first ones they get are all 1/6’s, unless that’s the character(s) they were hoping to pull. It’s definitely a fine balance for Funko


I think too, with the HP sets, that's why Harry is always a 1/6. You get some kid that wants Harry Potter, they've got a good chance of that. Same for Ron and Hermione. Annoying as all get out for those of us that pay attention to ratios, and want the whole set. That's why I'm particularly loving the ratios on S3, these ratios are much kinder than ratios of past sets!
Image ImageImage Image

User avatar
opopssum
Posts: 2806
Joined: Sun Feb 01, 2015 8:56 pm
Location: AZ
Contact:

Re: Harry Potter S3 MM

Postby opopssum » Mon Jul 02, 2018 8:44 am

The minis are finally hitting my area, after work I can make a mad dash to some targets and hope
- tauntaunking on instagram
Image

bug86
Posts: 174
Joined: Mon Jan 15, 2018 7:47 pm
Location: minnesota
Contact:

Re: Harry Potter S3 MM

Postby bug86 » Mon Jul 02, 2018 11:57 am

A few stores near me are showing in stocks. Now let's see if I can actually find them.
Live,Laugh and Funko. :freddy3:

Hey it's Ashley.

@backgotback on twitter and @alizpt on IG.

User avatar
hailmary25
Posts: 5590
Joined: Tue Mar 10, 2015 10:46 am
Location: Philadelphia
Contact:

Re: Harry Potter S3 MM

Postby hailmary25 » Mon Jul 02, 2018 12:49 pm

opopssum wrote:The minis are finally hitting my area, after work I can make a mad dash to some targets and hope


Good luck
Image
Signed Pops:101
MM: 116
Pops :554
First Pop: Jax Teller
Most Recent: Signed DW Silence
Top Pop: Cobweb Bilbo
Image

User avatar
opopssum
Posts: 2806
Joined: Sun Feb 01, 2015 8:56 pm
Location: AZ
Contact:

Re: Harry Potter S3 MM

Postby opopssum » Mon Jul 02, 2018 3:41 pm

hailmary25 wrote:
opopssum wrote:The minis are finally hitting my area, after work I can make a mad dash to some targets and hope


Good luck



Went to a few targets, ill spare the long story (one employee verrrrrrry much hates pop collectors, he didnt hold back) but end result of the day is one Target let me by two minis, no exclusives but I got Draco and Crabb. I needed Crabb so small win. Ill go try again on the 8th which is apparently the street date most around me are keeping to the rest sold out.
Hopefully come the 8th the rest of the targets haven't sold out too :rolleyes: Target, always a gamble.
- tauntaunking on instagram
Image

User avatar
keyese
Posts: 2909
Joined: Sat Jun 25, 2016 12:38 am
Location: Madison, WI
Contact:

Re: Harry Potter S3 MM

Postby keyese » Mon Jul 02, 2018 3:46 pm

Found these at one Target (the other had already been picked over, and the last one that showed in stock the guy said he couldn't find them). I got a Ron and Goyle, not too bad a haul! Unfortunately, the guy would only let us do one mini per person (Nate was with me luckily). So I couldn't get a Harry even though I know he was there.
AKA ElizabethKeyes on Twitch or keyese on Discord :freddy2:
ISO Mystery Minis!
Lord of the Rings: Eowyn (HT) and Lurtz (HT)
Avengers Endgame: 1/72 Hulk, 1/72 Hawkeye, 1/24 Black Widow (all Walmart exclusives)

bug86
Posts: 174
Joined: Mon Jan 15, 2018 7:47 pm
Location: minnesota
Contact:

Re: Harry Potter S3 MM

Postby bug86 » Mon Jul 02, 2018 5:37 pm

No luck at the two targets I stopped at today that showed in stocks. Of course they couldn't find them. lol
Live,Laugh and Funko. :freddy3:

Hey it's Ashley.

@backgotback on twitter and @alizpt on IG.

User avatar
hailmary25
Posts: 5590
Joined: Tue Mar 10, 2015 10:46 am
Location: Philadelphia
Contact:

Re: Harry Potter S3 MM

Postby hailmary25 » Mon Jul 02, 2018 6:13 pm

opopssum wrote:
hailmary25 wrote:
opopssum wrote:The minis are finally hitting my area, after work I can make a mad dash to some targets and hope


Good luck



Went to a few targets, ill spare the long story (one employee verrrrrrry much hates pop collectors, he didnt hold back) but end result of the day is one Target let me by two minis, no exclusives but I got Draco and Crabb. I needed Crabb so small win. Ill go try again on the 8th which is apparently the street date most around me are keeping to the rest sold out.
Hopefully come the 8th the rest of the targets haven't sold out too :rolleyes: Target, always a gamble.



People keep saying the 8th is suppose to be a put on shelf by date meaning they can sell whenever they want but has to be on shelf by 7/8
Image
Signed Pops:101
MM: 116
Pops :554
First Pop: Jax Teller
Most Recent: Signed DW Silence
Top Pop: Cobweb Bilbo
Image

User avatar
keyese
Posts: 2909
Joined: Sat Jun 25, 2016 12:38 am
Location: Madison, WI
Contact:

Re: Harry Potter S3 MM

Postby keyese » Mon Jul 02, 2018 7:18 pm

hailmary25 wrote:
opopssum wrote:
hailmary25 wrote:
Good luck



Went to a few targets, ill spare the long story (one employee verrrrrrry much hates pop collectors, he didnt hold back) but end result of the day is one Target let me by two minis, no exclusives but I got Draco and Crabb. I needed Crabb so small win. Ill go try again on the 8th which is apparently the street date most around me are keeping to the rest sold out.
Hopefully come the 8th the rest of the targets haven't sold out too :rolleyes: Target, always a gamble.



People keep saying the 8th is suppose to be a put on shelf by date meaning they can sell whenever they want but has to be on shelf by 7/8

Yeah, what sucks is that the next shift person will probably read it differently and sell them before 7/8. I've had that happen several times before.
AKA ElizabethKeyes on Twitch or keyese on Discord :freddy2:
ISO Mystery Minis!
Lord of the Rings: Eowyn (HT) and Lurtz (HT)
Avengers Endgame: 1/72 Hulk, 1/72 Hawkeye, 1/24 Black Widow (all Walmart exclusives)

User avatar
MattyPHATty
Posts: 2151
Joined: Sun Oct 02, 2016 8:37 pm

Re: Harry Potter S3 MM

Postby MattyPHATty » Mon Jul 02, 2018 7:49 pm

bug86 wrote:A few stores near me are showing in stocks. Now let's see if I can actually find them.

There in lies the actual problem a lot of times lately at Targets-finding them ](*,)
Image

User avatar
synergy56
Posts: 2492
Joined: Thu Feb 05, 2015 8:29 pm
Location: Santa Clara, CA

Re: Harry Potter S3 MM

Postby synergy56 » Mon Jul 02, 2018 8:03 pm

yeah I've had some targets where the employees just don't care and say they haven't seen them (sometimes I found them sitting on the shelves after they said that which is hilarious). But I have had a few stores now where the employees are actually really great and have searched high and low in various parts of their stock rooms and haven't been able to find them. Also got the whole speech about how they aren't going to put them out until the 8th and they are telling everyone that to make it fair, and then I checked back in the next day and they had sold them all. Luckily I haven't run into the "one per person" rule yet, since it just doesn't even make sense for Mystery minis, but at one Target they found the case in the back and were talking among themselves if it was ok for me to buy 3, but they went ahead and let me since I was the only one that had come looking for them. Although the odds for this set are technically better, I feel like it's been more brutal. I have had to go through 6 cases at HT and Target now before I managed to get all 3 of the exclusives from each. I'm worried about B&N since I don't have that many around me anymore so I may have to try my luck online.
Hi, I'm Merri!
Image

User avatar
opopssum
Posts: 2806
Joined: Sun Feb 01, 2015 8:56 pm
Location: AZ
Contact:

Re: Harry Potter S3 MM

Postby opopssum » Mon Jul 02, 2018 9:22 pm

Iv made up my mind to go try some more tomorrow, I mean gas is so cheap right now right ;)
- tauntaunking on instagram
Image

User avatar
dexiesmom
Posts: 2263
Joined: Wed May 17, 2017 11:49 am

Re: Harry Potter S3 MM

Postby dexiesmom » Mon Jul 02, 2018 10:52 pm

Katers wrote:
MattyPHATty wrote:
dexiesmom wrote:This is true. But I guess from Funko's perspective if that random person got a really good one they might want to start collecting to complete the set?

Most definitely. I would say someone would be a lot less likely to buy another one if the first ones they get are all 1/6’s, unless that’s the character(s) they were hoping to pull. It’s definitely a fine balance for Funko


I think too, with the HP sets, that's why Harry is always a 1/6. You get some kid that wants Harry Potter, they've got a good chance of that. Same for Ron and Hermione. Annoying as all get out for those of us that pay attention to ratios, and want the whole set. That's why I'm particularly loving the ratios on S3, these ratios are much kinder than ratios of past sets!

Yeah, this is where it becomes an extremely fine balance for Funko. They want to be able to attract new collectors but they also want to be able to please hardcore collectors/completists. If they only please us, while we will always happy, they won't be able to survive forever. They have to have average people make purchases too/appeal to the average person.
Image

User avatar
RobinBear177
Posts: 1737
Joined: Tue Jul 21, 2015 8:26 pm

Re: Harry Potter S3 MM

Postby RobinBear177 » Tue Jul 03, 2018 1:12 am

Found a case at target right now but there were exactly 3 missing so I left it alone
Image

User avatar
Geescube
HoF 2016 & CotM
HoF 2016 & CotM
Posts: 6239
Joined: Fri Jul 20, 2012 11:53 pm

Re: Harry Potter S3 MM

Postby Geescube » Tue Jul 03, 2018 2:11 am

hailmary25 wrote:People keep saying the 8th is suppose to be a put on shelf by date meaning they can sell whenever they want but has to be on shelf by 7/8


Yep. The difference between SET date and STREET dare.
Image

User avatar
Katers
Posts: 8471
Joined: Thu Jun 09, 2016 3:12 pm
Location: Orange County, CA
Contact:

Re: Harry Potter S3 MM

Postby Katers » Tue Jul 03, 2018 2:19 am

opopssum wrote:Iv made up my mind to go try some more tomorrow, I mean gas is so cheap right now right ;)


Probably cheaper with that AC than the house AC, at least! Good luck on the hunt!
Image ImageImage Image

User avatar
Katers
Posts: 8471
Joined: Thu Jun 09, 2016 3:12 pm
Location: Orange County, CA
Contact:

Re: Harry Potter S3 MM

Postby Katers » Tue Jul 03, 2018 2:21 am

dexiesmom wrote:
Katers wrote:
MattyPHATty wrote:Most definitely. I would say someone would be a lot less likely to buy another one if the first ones they get are all 1/6’s, unless that’s the character(s) they were hoping to pull. It’s definitely a fine balance for Funko


I think too, with the HP sets, that's why Harry is always a 1/6. You get some kid that wants Harry Potter, they've got a good chance of that. Same for Ron and Hermione. Annoying as all get out for those of us that pay attention to ratios, and want the whole set. That's why I'm particularly loving the ratios on S3, these ratios are much kinder than ratios of past sets!

Yeah, this is where it becomes an extremely fine balance for Funko. They want to be able to attract new collectors but they also want to be able to please hardcore collectors/completists. If they only please us, while we will always happy, they won't be able to survive forever. They have to have average people make purchases too/appeal to the average person.


I think they do a pretty decent job balancing it, at least with the HP sets. This set, in my opinion, is a lot kinder than some of the sets that have come out recently! And the designs they're picking have been great - lots of friends of mine that are willing to buy up my extra commons!
Image ImageImage Image

User avatar
Katers
Posts: 8471
Joined: Thu Jun 09, 2016 3:12 pm
Location: Orange County, CA
Contact:

Re: Harry Potter S3 MM

Postby Katers » Tue Jul 03, 2018 2:22 am

RobinBear177 wrote:Found a case at target right now but there were exactly 3 missing so I left it alone


Excellent willpower!! =D>
Image ImageImage Image

User avatar
dexiesmom
Posts: 2263
Joined: Wed May 17, 2017 11:49 am

Re: Harry Potter S3 MM

Postby dexiesmom » Tue Jul 03, 2018 9:42 am

Katers wrote:
dexiesmom wrote:
Katers wrote:
I think too, with the HP sets, that's why Harry is always a 1/6. You get some kid that wants Harry Potter, they've got a good chance of that. Same for Ron and Hermione. Annoying as all get out for those of us that pay attention to ratios, and want the whole set. That's why I'm particularly loving the ratios on S3, these ratios are much kinder than ratios of past sets!

Yeah, this is where it becomes an extremely fine balance for Funko. They want to be able to attract new collectors but they also want to be able to please hardcore collectors/completists. If they only please us, while we will always happy, they won't be able to survive forever. They have to have average people make purchases too/appeal to the average person.


I think they do a pretty decent job balancing it, at least with the HP sets. This set, in my opinion, is a lot kinder than some of the sets that have come out recently! And the designs they're picking have been great - lots of friends of mine that are willing to buy up my extra commons!

I think a lot of the sets lately have been pretty good ratio wise, not counting Deadpool lol. I feel like in general they are moving towards much more nicer ratios. Fewer 1/72s.
Image

User avatar
hailmary25
Posts: 5590
Joined: Tue Mar 10, 2015 10:46 am
Location: Philadelphia
Contact:

Re: Harry Potter S3 MM

Postby hailmary25 » Tue Jul 03, 2018 9:45 am

dexiesmom wrote:
Katers wrote:
dexiesmom wrote:Yeah, this is where it becomes an extremely fine balance for Funko. They want to be able to attract new collectors but they also want to be able to please hardcore collectors/completists. If they only please us, while we will always happy, they won't be able to survive forever. They have to have average people make purchases too/appeal to the average person.


I think they do a pretty decent job balancing it, at least with the HP sets. This set, in my opinion, is a lot kinder than some of the sets that have come out recently! And the designs they're picking have been great - lots of friends of mine that are willing to buy up my extra commons!

I think a lot of the sets lately have been pretty good ratio wise, not counting Deadpool lol. I feel like in general they are moving towards much more nicer ratios. Fewer 1/72s.


I do tend to agree with this. I feel better about S3 than I ever did about S2. All I need are Target and B&N exclusives. What makes this set appear tougher is that everyone Hardcore mini collectors, flippers and casual HP fans scoop up all things HP
Image
Signed Pops:101
MM: 116
Pops :554
First Pop: Jax Teller
Most Recent: Signed DW Silence
Top Pop: Cobweb Bilbo
Image

bug86
Posts: 174
Joined: Mon Jan 15, 2018 7:47 pm
Location: minnesota
Contact:

Re: Harry Potter S3 MM

Postby bug86 » Tue Jul 03, 2018 12:36 pm

I was able to get three minis from one Target this morning. I ended up with two more krums ugh lol and the Target Ron.
Live,Laugh and Funko. :freddy3:

Hey it's Ashley.

@backgotback on twitter and @alizpt on IG.

User avatar
dexiesmom
Posts: 2263
Joined: Wed May 17, 2017 11:49 am

Re: Harry Potter S3 MM

Postby dexiesmom » Tue Jul 03, 2018 9:45 pm

hailmary25 wrote:
dexiesmom wrote:
Katers wrote:
I think they do a pretty decent job balancing it, at least with the HP sets. This set, in my opinion, is a lot kinder than some of the sets that have come out recently! And the designs they're picking have been great - lots of friends of mine that are willing to buy up my extra commons!

I think a lot of the sets lately have been pretty good ratio wise, not counting Deadpool lol. I feel like in general they are moving towards much more nicer ratios. Fewer 1/72s.


I do tend to agree with this. I feel better about S3 than I ever did about S2. All I need are Target and B&N exclusives. What makes this set appear tougher is that everyone Hardcore mini collectors, flippers and casual HP fans scoop up all things HP

I agree, with the more popular sets (and especially when boxes get misprinted with ratios) more popular sets are becoming hard to complete.
Image

gobiesox
Posts: 15
Joined: Mon Jun 25, 2018 11:39 am

Re: Harry Potter S3 MM

Postby gobiesox » Tue Jul 03, 2018 10:06 pm

Hi! New to posting, but have been lurking the HP mini boards since I discovered S2 way late in the game. (Thank you all for enabling me!)

Anyone know what Target Ron's face paint is about? I could guess that the K is for Krum, and I'm assuming the other cheek is a flag, but all I can find for those colors are a version of the anarchist socialist flag lol

Still waiting for Target exclusives on the east coast!

Avengers74
Posts: 533
Joined: Wed Sep 23, 2015 6:23 pm
Location: Orlando, Fl.

Re: Harry Potter S3 MM

Postby Avengers74 » Wed Jul 04, 2018 12:20 am

gobiesox wrote:Hi! New to posting, but have been lurking the HP mini boards since I discovered S2 way late in the game. (Thank you all for enabling me!)

Anyone know what Target Ron's face paint is about? I could guess that the K is for Krum, and I'm assuming the other cheek is a flag, but all I can find for those colors are a version of the anarchist socialist flag lol

Still waiting for Target exclusives on the east coast!


The face paint is the colors for the Bulgarian Quidditch Team. It is from the scene in Goblet of Fire when the go to the Quidditch World Cup final - Bulgaria vs Ireland.

bug86
Posts: 174
Joined: Mon Jan 15, 2018 7:47 pm
Location: minnesota
Contact:

Re: Harry Potter S3 MM

Postby bug86 » Wed Jul 04, 2018 9:40 am

If I get one more Krum I'm going to lose it. I think six is enough. I have now gotten the Target Ron and Harry. Hoping to find Hermione soon so I can stop buying those ones.
Live,Laugh and Funko. :freddy3:

Hey it's Ashley.

@backgotback on twitter and @alizpt on IG.

gobiesox
Posts: 15
Joined: Mon Jun 25, 2018 11:39 am

Re: Harry Potter S3 MM

Postby gobiesox » Wed Jul 04, 2018 10:07 am

Avengers74 wrote:
gobiesox wrote:Hi! New to posting, but have been lurking the HP mini boards since I discovered S2 way late in the game. (Thank you all for enabling me!)

Anyone know what Target Ron's face paint is about? I could guess that the K is for Krum, and I'm assuming the other cheek is a flag, but all I can find for those colors are a version of the anarchist socialist flag lol

Still waiting for Target exclusives on the east coast!


The face paint is the colors for the Bulgarian Quidditch Team. It is from the scene in Goblet of Fire when the go to the Quidditch World Cup final - Bulgaria vs Ireland.


Ooh, that makes sense! I got caught up in the rectangle shape & couldn't move my brain away from the thought of it being a flag. Thanks!!

User avatar
bcfunko
Posts: 18
Joined: Tue May 01, 2018 4:37 pm
Location: Orange County, CA
Contact:

Re: Harry Potter S3 MM

Postby bcfunko » Wed Jul 04, 2018 8:49 pm

bug86 wrote:If I get one more Krum I'm going to lose it. I think six is enough. I have now gotten the Target Ron and Harry. Hoping to find Hermione soon so I can stop buying those ones.


lol, this. I told myself I can only try on the Targets if there’s a fresh, untouched case - but otherwise, I’m just gonna have to wait till the Barnes and Noble one comes in!

My goal is to just get one of the Riddles [-o<
Come follow Freddy to my IG @bcfunko :freddy2:
1st Funko Pop!: Loki (02) from Thor: The Mighty Avenger
Hopeful Grail: SDCC Exclusive Loki (16) from The Avengers (480 pcs)

User avatar
Katers
Posts: 8471
Joined: Thu Jun 09, 2016 3:12 pm
Location: Orange County, CA
Contact:

Re: Harry Potter S3 MM

Postby Katers » Thu Jul 05, 2018 2:09 am

dexiesmom wrote:
Katers wrote:
dexiesmom wrote:Yeah, this is where it becomes an extremely fine balance for Funko. They want to be able to attract new collectors but they also want to be able to please hardcore collectors/completists. If they only please us, while we will always happy, they won't be able to survive forever. They have to have average people make purchases too/appeal to the average person.


I think they do a pretty decent job balancing it, at least with the HP sets. This set, in my opinion, is a lot kinder than some of the sets that have come out recently! And the designs they're picking have been great - lots of friends of mine that are willing to buy up my extra commons!

I think a lot of the sets lately have been pretty good ratio wise, not counting Deadpool lol. I feel like in general they are moving towards much more nicer ratios. Fewer 1/72s.


I can't say for certain either way - mostly I've only collected HP or Marvel. I do know that the IW set was just hideous with the ratios, but this HP set has, so far, been a lot kinder. I don't have a zillion extras of one character, which is a wonderful change. Target has been a bit frustrating, but at least there's a LOT of Targets to try. Still a little worried about B&N, but we'll see. At least they normally have more than 1 case per store!
Image ImageImage Image

User avatar
Katers
Posts: 8471
Joined: Thu Jun 09, 2016 3:12 pm
Location: Orange County, CA
Contact:

Re: Harry Potter S3 MM

Postby Katers » Thu Jul 05, 2018 2:10 am

hailmary25 wrote:
dexiesmom wrote:
Katers wrote:
I think they do a pretty decent job balancing it, at least with the HP sets. This set, in my opinion, is a lot kinder than some of the sets that have come out recently! And the designs they're picking have been great - lots of friends of mine that are willing to buy up my extra commons!

I think a lot of the sets lately have been pretty good ratio wise, not counting Deadpool lol. I feel like in general they are moving towards much more nicer ratios. Fewer 1/72s.


I do tend to agree with this. I feel better about S3 than I ever did about S2. All I need are Target and B&N exclusives. What makes this set appear tougher is that everyone Hardcore mini collectors, flippers and casual HP fans scoop up all things HP


lol , yeah, this set isn't a problem because of the ratios, it's a problem because it's HP!
Image ImageImage Image

User avatar
Katers
Posts: 8471
Joined: Thu Jun 09, 2016 3:12 pm
Location: Orange County, CA
Contact:

Re: Harry Potter S3 MM

Postby Katers » Thu Jul 05, 2018 2:13 am

bug86 wrote:I was able to get three minis from one Target this morning. I ended up with two more krums ugh lol and the Target Ron.


At least you got Ron! You're ahead of a lot of people by scoring him! :cheers:
Image ImageImage Image

User avatar
dexiesmom
Posts: 2263
Joined: Wed May 17, 2017 11:49 am

Re: Harry Potter S3 MM

Postby dexiesmom » Thu Jul 05, 2018 9:44 am

Katers wrote:
hailmary25 wrote:
dexiesmom wrote:I think a lot of the sets lately have been pretty good ratio wise, not counting Deadpool lol. I feel like in general they are moving towards much more nicer ratios. Fewer 1/72s.


I do tend to agree with this. I feel better about S3 than I ever did about S2. All I need are Target and B&N exclusives. What makes this set appear tougher is that everyone Hardcore mini collectors, flippers and casual HP fans scoop up all things HP


lol , yeah, this set isn't a problem because of the ratios, it's a problem because it's HP!

This is true!! But they are releasing so many amazing molds and characters!! lol lol
Image

User avatar
hailmary25
Posts: 5590
Joined: Tue Mar 10, 2015 10:46 am
Location: Philadelphia
Contact:

Re: Harry Potter S3 MM

Postby hailmary25 » Thu Jul 05, 2018 11:08 am

Stalking brickseek like crazy every hour to hunt these minis plus the Dobby and Basilisk
Image
Signed Pops:101
MM: 116
Pops :554
First Pop: Jax Teller
Most Recent: Signed DW Silence
Top Pop: Cobweb Bilbo
Image

User avatar
opopssum
Posts: 2806
Joined: Sun Feb 01, 2015 8:56 pm
Location: AZ
Contact:

Re: Harry Potter S3 MM

Postby opopssum » Thu Jul 05, 2018 12:27 pm

Another target box another crabb and Draco
- tauntaunking on instagram
Image

User avatar
hailmary25
Posts: 5590
Joined: Tue Mar 10, 2015 10:46 am
Location: Philadelphia
Contact:

Re: Harry Potter S3 MM

Postby hailmary25 » Thu Jul 05, 2018 2:18 pm

opopssum wrote:Another target box another crabb and Draco


Did you at least get to pick boxes this time lol or did they hand to you?
Image
Signed Pops:101
MM: 116
Pops :554
First Pop: Jax Teller
Most Recent: Signed DW Silence
Top Pop: Cobweb Bilbo
Image

User avatar
opopssum
Posts: 2806
Joined: Sun Feb 01, 2015 8:56 pm
Location: AZ
Contact:

Re: Harry Potter S3 MM

Postby opopssum » Thu Jul 05, 2018 4:52 pm

hailmary25 wrote:
opopssum wrote:Another target box another crabb and Draco


Did you at least get to pick boxes this time lol or did they hand to you?


One handed to me one I got to pick.
Im noticing a new wave of dracos and crabbs Im wondering if the Target cases got a disproportionate amount
- tauntaunking on instagram
Image

User avatar
keyese
Posts: 2909
Joined: Sat Jun 25, 2016 12:38 am
Location: Madison, WI
Contact:

Re: Harry Potter S3 MM

Postby keyese » Thu Jul 05, 2018 5:26 pm

My combos of Target boxes were: Draco/Filch, Draco/Crabbe, Ron/Goyle, Filch/Ron
AKA ElizabethKeyes on Twitch or keyese on Discord :freddy2:
ISO Mystery Minis!
Lord of the Rings: Eowyn (HT) and Lurtz (HT)
Avengers Endgame: 1/72 Hulk, 1/72 Hawkeye, 1/24 Black Widow (all Walmart exclusives)

User avatar
hailmary25
Posts: 5590
Joined: Tue Mar 10, 2015 10:46 am
Location: Philadelphia
Contact:

Re: Harry Potter S3 MM

Postby hailmary25 » Thu Jul 05, 2018 8:49 pm

kihou wrote:My combos of Target boxes were: Draco/Filch, Draco/Crabbe, Ron/Goyle, Filch/Ron

Is this the front two?
Image
Signed Pops:101
MM: 116
Pops :554
First Pop: Jax Teller
Most Recent: Signed DW Silence
Top Pop: Cobweb Bilbo
Image

User avatar
synergy56
Posts: 2492
Joined: Thu Feb 05, 2015 8:29 pm
Location: Santa Clara, CA

Re: Harry Potter S3 MM

Postby synergy56 » Thu Jul 05, 2018 9:27 pm

I seriously need the Barnes & Noble cases to either come out this week or wait until after the 24th for when I'm back from SDCC. That's not too much to ask for, right? lol Also from the hunt I am experiencing a serious Filtch flood. I think I have 9 of that angry old man at this point! Why must I always get a Filtch case?!
Hi, I'm Merri!
Image


Return to “Blind Bags”

Who is online

Users browsing this forum: No registered users