Hello All -
I traded for an older Franken Berry pop which the other person stated was mint in box. As a total in box collector, I was thrilled because it's a pop that I've wanted since I first saw it, but the price was above what I wanted to pay.
When I received the pop, everything looked great, the box only showing minor wear.
Unfortunately, I did something that I've only done twice before, removed the figure from the box to see what it looked like. When I did, the head fell off in my hand and the inside of the figure was filthy. You could clearly tell that the figure had been used, broken, then cleaned up, and put back into the box. I believe the other person figured as an in box collector, that I would never open it up.
I am completely disappointed but there's nothing I can do.
Can anybody tell me the safest, easiest way to clean the pop back up, and secure the head back on? It will go back in the box, and into my collection.
Any help would be greatly appreciated.
Thank you all.
Repairing a Pop
Forum rules
This section is for general Pop discussion, not showing off your recent acquisitions. Please use the Dance Hall for collection addition pictures.
Please post Funko subscription box and item discussions in the Powered By Funko section.
This section is for general Pop discussion, not showing off your recent acquisitions. Please use the Dance Hall for collection addition pictures.
Please post Funko subscription box and item discussions in the Powered By Funko section.
- Walker Hunter
- Posts: 120
- Joined: Tue Nov 24, 2015 2:25 pm
Repairing a Pop
"Even my HAPPY place is filled with WALKERS!!!"
- Vinyl4Blood
- Posts: 1815
- Joined: Wed Jul 27, 2016 11:10 am
- Location: Bakersfield, CA
- Contact:
Re: Repairing a Pop
I'm sorry to hear about your experience.
We would need to see some pics of the damage in order to give you some advice on how to proceed.
We would need to see some pics of the damage in order to give you some advice on how to proceed.
-They call me... Wes (AKA ScrappyMosier on Twitter & Vinyl4Blood on IG)
"OMG.. I need that"
Pop Grail wish list: Freddy Stark Pop and Comic Con 2009 "Big Fred" wobbler, Camp Fundays Freddy as Spartan. Any condition.

"OMG.. I need that"
Pop Grail wish list: Freddy Stark Pop and Comic Con 2009 "Big Fred" wobbler, Camp Fundays Freddy as Spartan. Any condition.

- Walker Hunter
- Posts: 120
- Joined: Tue Nov 24, 2015 2:25 pm
Re: Repairing a Pop
Vinyl4Blood wrote:I'm sorry to hear about your experience.
We would need to see some pics of the damage in order to give you some advice on how to proceed.
Thank you. I'll take some tonight and post them. I appreciate the response.
"Even my HAPPY place is filled with WALKERS!!!"
- treswright
- Posts: 6045
- Joined: Mon May 25, 2015 4:11 am
- Location: Dallas, TX
- Contact:
Re: Repairing a Pop
How long ago did you buy it and where? If recent and off of eBay, I would definitely contact the seller and tell them to shove it up their... I mean tell them you want to return it
Ebay and Paypal are notorious for finding for the buyer, if you file a complaint you will get your money back. But first contact the seller before filing a complaint. If the seller refuses to work with you then file a claim.
When you say the inside of the figure was filthy, you mean the interior of the head? The plug fits into the head, there shouldn't be a hole in the body. I can't imagine how the inside of the head would get dirty, but personally if I were keeping it I would use warm sudsy water and a soft toothbrush and q-tips to clean out the inside of it, then rinse it with cool water and let it air dry overnight before trying to glue the plug back in. To glue the plug back into the head I'd use clear Shoe Goo.
When you say the inside of the figure was filthy, you mean the interior of the head? The plug fits into the head, there shouldn't be a hole in the body. I can't imagine how the inside of the head would get dirty, but personally if I were keeping it I would use warm sudsy water and a soft toothbrush and q-tips to clean out the inside of it, then rinse it with cool water and let it air dry overnight before trying to glue the plug back in. To glue the plug back into the head I'd use clear Shoe Goo.
Howdy, I'm Tres 


- jagpop
- Posts: 3466
- Joined: Thu Apr 14, 2016 3:24 pm
- Location: So Cal
Re: Repairing a Pop
This is unfortunate. Hopefully we can help you with some tips once the pictures go up.

I am not in danger, I am the danger! A guy opens his door and gets shot and you think that of me? No. I am the one who knocks!
- Walker Hunter
- Posts: 120
- Joined: Tue Nov 24, 2015 2:25 pm
Re: Repairing a Pop
treswright wrote:How long ago did you buy it and where? If recent and off of eBay, I would definitely contact the seller and tell them to shove it up their... I mean tell them you want to return itEbay and Paypal are notorious for finding for the buyer, if you file a complaint you will get your money back. But first contact the seller before filing a complaint. If the seller refuses to work with you then file a claim.
When you say the inside of the figure was filthy, you mean the interior of the head? The plug fits into the head, there shouldn't be a hole in the body. I can't imagine how the inside of the head would get dirty, but personally if I were keeping it I would use warm sudsy water and a soft toothbrush and q-tips to clean out the inside of it, then rinse it with cool water and let it air dry overnight before trying to glue the plug back in. To glue the plug back into the head I'd use clear Shoe Goo.
Hey Treswright, Vinyl4blood, and Jagpop,
Thank you all. Sadly it was a trade with a FB group and the other person has been banned.
I did manage to clean up the pop with warm water and a very little dawn, and Q-Tips.
I'd like to get the head secured but haven't done one before. I'm having trouble uploading the photos.
"Even my HAPPY place is filled with WALKERS!!!"
- treswright
- Posts: 6045
- Joined: Mon May 25, 2015 4:11 am
- Location: Dallas, TX
- Contact:
Re: Repairing a Pop
Walker Hunter wrote:treswright wrote:How long ago did you buy it and where? If recent and off of eBay, I would definitely contact the seller and tell them to shove it up their... I mean tell them you want to return itEbay and Paypal are notorious for finding for the buyer, if you file a complaint you will get your money back. But first contact the seller before filing a complaint. If the seller refuses to work with you then file a claim.
When you say the inside of the figure was filthy, you mean the interior of the head? The plug fits into the head, there shouldn't be a hole in the body. I can't imagine how the inside of the head would get dirty, but personally if I were keeping it I would use warm sudsy water and a soft toothbrush and q-tips to clean out the inside of it, then rinse it with cool water and let it air dry overnight before trying to glue the plug back in. To glue the plug back into the head I'd use clear Shoe Goo.
Hey Treswright, Vinyl4blood, and Jagpop,
Thank you all. Sadly it was a trade with a FB group and the other person has been banned.
I did manage to clean up the pop with warm water and a very little dawn, and Q-Tips.
I'd like to get the head secured but haven't done one before. I'm having trouble uploading the photos.
Oh man, sorry to hear that! I've cut plugs out of customs and reglued them. First dry-fit it, it should only go back together one way. So rotate the head around on the plug until they slot together. Then take a pencil or pen and make a mark on both pieces so you can line them up again. Then separate them and apply a small smear of clear shoe goo around the edge of one piece or the other, line the marks up and join the pieces. Wipe off any excess before it sets up. I forget the working time of Shoe Goo, but it's in the instructions. I think it has to set up a few hours. So situate the parts so the glue can set up. I usually set a shop towel into a box and shape the towel so the Pop will sit in it upside down. After it cures then erase the alignment marks and you're done!
Howdy, I'm Tres 


- Walker Hunter
- Posts: 120
- Joined: Tue Nov 24, 2015 2:25 pm
Re: Repairing a Pop
treswright wrote:Walker Hunter wrote:treswright wrote:How long ago did you buy it and where? If recent and off of eBay, I would definitely contact the seller and tell them to shove it up their... I mean tell them you want to return itEbay and Paypal are notorious for finding for the buyer, if you file a complaint you will get your money back. But first contact the seller before filing a complaint. If the seller refuses to work with you then file a claim.
When you say the inside of the figure was filthy, you mean the interior of the head? The plug fits into the head, there shouldn't be a hole in the body. I can't imagine how the inside of the head would get dirty, but personally if I were keeping it I would use warm sudsy water and a soft toothbrush and q-tips to clean out the inside of it, then rinse it with cool water and let it air dry overnight before trying to glue the plug back in. To glue the plug back into the head I'd use clear Shoe Goo.
Hey Treswright, Vinyl4blood, and Jagpop,
Thank you all. Sadly it was a trade with a FB group and the other person has been banned.
I did manage to clean up the pop with warm water and a very little dawn, and Q-Tips.
I'd like to get the head secured but haven't done one before. I'm having trouble uploading the photos.
Oh man, sorry to hear that! I've cut plugs out of customs and reglued them. First dry-fit it, it should only go back together one way. So rotate the head around on the plug until they slot together. Then take a pencil or pen and make a mark on both pieces so you can line them up again. Then separate them and apply a small smear of clear shoe goo around the edge of one piece or the other, line the marks up and join the pieces. Wipe off any excess before it sets up. I forget the working time of Shoe Goo, but it's in the instructions. I think it has to set up a few hours. So situate the parts so the glue can set up. I usually set a shop towel into a box and shape the towel so the Pop will sit in it upside down. After it cures then erase the alignment marks and you're done!
Hey Bud - Thanks for the assist. It would appear that I don't yet have "permission" to post pics so I just wanted to let you know what I was referring to. It looks like my figure is the opposite of what you described. The Frankenberry BODY does have the cavity, and the head has a plug which inserts down into it, not the reverse. I'm going to try and locate the "shoe goo". I'll let everyone know how it works out.
"Even my HAPPY place is filled with WALKERS!!!"
- treswright
- Posts: 6045
- Joined: Mon May 25, 2015 4:11 am
- Location: Dallas, TX
- Contact:
Re: Repairing a Pop
Walker Hunter wrote:It would appear that I don't yet have "permission" to post pics
Anyone can post pics, but the board doesn't "host" pictures. So you have to first upload them to a photo hosting service. There are some free ones, seems like the most popular ones are s5.photobucket.com and tinypic.com/ (I have a web site so use my own space for my pics). Once you upload your pics to one of those then you copy the URL and click on the little mountain button about the posting window here (if you're in the "Quick Reply" view then click "Full Editor and Preview" to get to the buttons) and paste the link in. The pic will then show up in your post.
Howdy, I'm Tres 


Who is online
Users browsing this forum: No registered users
