Awesome acrylic cases!

It don't mean a thing if it ain't got a spring. Come inside and chat about Funko Wacky Wobblers (bobble heads, for the less sophisticated).
User avatar
MyLittleFunkos
HoF 2016 & CotY
HoF 2016 & CotY
Posts: 5210
Joined: Wed Jan 02, 2013 7:33 pm
Location: Chicago, IL

Awesome acrylic cases!

Postby MyLittleFunkos » Mon Mar 17, 2014 10:19 am

I had been looking for (inexpensive) individual plexi cases for my pez and wobbler protos and I finally found some at Michael's yesterday. They fit a loose wobbler, a pez, and a funko force piece perfectly (these are the only ones I tried). The best part is that they are on sale, buy one at $9.99 and get one free! So, basically, $5 a piece. Unfortunately, they do not fit a boxed wobbler...

Image

Hopefully this helps some Funatics out!

Michaels link: http://www.michaels.com/8x3.37x3.37-inc ... lt,pd.html
Image
I'm Abe

User avatar
TheJobaFett
HoF 2017 & Rookie
HoF 2017 & Rookie
Posts: 2510
Joined: Thu Jan 31, 2013 2:51 pm
Location: Stafford, VA
Contact:

Re: Awesome acrylic cases!

Postby TheJobaFett » Mon Mar 17, 2014 11:22 am

I have a trio of these that I got on sale as well. Until I have a Craig/Carol/Kevin level display, however, I don't really have room for them...they are really perfect for all those rarities you don't want getting dusty :)
ImageImageMay the Funko Be With You

User avatar
MyLittleFunkos
HoF 2016 & CotY
HoF 2016 & CotY
Posts: 5210
Joined: Wed Jan 02, 2013 7:33 pm
Location: Chicago, IL

Re: Awesome acrylic cases!

Postby MyLittleFunkos » Mon Mar 17, 2014 12:02 pm

I had been to Michaels a bunch of times and never seen these, figured maybe they were new. I don't have a very big or collection full of rarities so the 10 that I purchased flow well on my shelves :D
Image
I'm Abe

User avatar
Alleycat
HoF 2008 & CotY
HoF 2008 & CotY
Posts: 9818
Joined: Tue Mar 08, 2005 12:49 pm
Location: Maitland, Florida

Re: Awesome acrylic cases!

Postby Alleycat » Mon Mar 17, 2014 12:15 pm

Abe, will these cases house the newer wobbler boxes? The older ones I have fit the older wobbler boxes perfectly.
.

Craig here......

User avatar
TulaBug
Posts: 8369
Joined: Thu Sep 06, 2012 7:51 pm
Location: MD

Re: Awesome acrylic cases!

Postby TulaBug » Mon Mar 17, 2014 12:48 pm

These are the cases that Scott and I use also. There was an old thread about this one comparing it to others but I can't find it. I have the Michael's and JoAnn's app on my phone. Both have weekly coupons that you can use. If the cases are not on sale than there is usually a 40-50% off coupon and sometimes they have a % off your total coupon. Yes, Michael's takes competitors coupon.

Craig, I have not found a wobble box that fits in the acrylic case.
Stacey

SPIRIT AWARD 2013

User avatar
MyLittleFunkos
HoF 2016 & CotY
HoF 2016 & CotY
Posts: 5210
Joined: Wed Jan 02, 2013 7:33 pm
Location: Chicago, IL

Re: Awesome acrylic cases!

Postby MyLittleFunkos » Mon Mar 17, 2014 1:36 pm

I tried squeezing my Freddy Stark wobbler box into these and it wouldn't close properly. Luckily I keep all my Iron Man pieces out of the box so it worked out :-)
Image
I'm Abe

User avatar
BigM
HoF 2019 & CotM
HoF 2019 & CotM
Posts: 5269
Joined: Tue Mar 12, 2013 4:02 pm
Location: The Bluegrass State
Contact:

Re: Awesome acrylic cases!

Postby BigM » Mon Mar 17, 2014 2:02 pm

This is great! I saw something like this a week ago and bought it for my freddy proto but it's much larger. These look like a good size though.
Mickey :SW7:
Team Deadpool!
COTM 01/17
Image

User avatar
Queen of Marvel
Posts: 1958
Joined: Fri Feb 15, 2013 10:51 pm
Location: Kansas City

Re: Awesome acrylic cases!

Postby Queen of Marvel » Mon Mar 17, 2014 2:22 pm

These boxes are badass! Looking good Abe!
Jeanne. The Queen of Marvel.

Image

User avatar
Scotty
HOF 2026 + ROTY
HOF 2026 + ROTY
Posts: 3121
Joined: Thu Aug 09, 2012 2:41 pm
Location: Baltimore, MD

Re: Awesome acrylic cases!

Postby Scotty » Mon Mar 17, 2014 4:32 pm

If these are the same ones that we use, they definitely don't fit a Wobbler box and they're also not completely square; they're tapered slightly in that the front is the largest dimension and it angles ever-so-slightly smaller on the 4 sides. I use these for my Freddys and my Hucks. Great find Abe.

3219

If you look at the top of the boxes between the purple shirt bowler Freddy and the RW&B Bowler Freddy, you can see the slight gap towards the back due to the tapered shape.
Image Image
2013 Rookie of the Year - COTM May 2014 - HOF Class of 2026

User avatar
MyLittleFunkos
HoF 2016 & CotY
HoF 2016 & CotY
Posts: 5210
Joined: Wed Jan 02, 2013 7:33 pm
Location: Chicago, IL

Re: Awesome acrylic cases!

Postby MyLittleFunkos » Mon Mar 17, 2014 4:48 pm

Scott, do your cases open from the front or the top? I purchased a wobbler last week and it came with a case that fit the box perfectly and that case opened from the top. The one from Michaels opens from the front and doesn't appear tapered but I'll double check when I get home. But for $5 each it's a steal!
Image
I'm Abe

User avatar
MyLittleFunkos
HoF 2016 & CotY
HoF 2016 & CotY
Posts: 5210
Joined: Wed Jan 02, 2013 7:33 pm
Location: Chicago, IL

Re: Awesome acrylic cases!

Postby MyLittleFunkos » Mon Mar 17, 2014 7:22 pm

It Is confirmed...Mine taper and do not fit a newer wobbler box.
Image
I'm Abe

User avatar
h3wi3
Posts: 630
Joined: Sun Feb 16, 2014 12:56 am
Location: Tucson, Az
Contact:

Re: Awesome acrylic cases!

Postby h3wi3 » Mon Mar 17, 2014 7:28 pm

Thanks for the heads up, going to buy a few.
Hbox

ISO: Grey Captian Mal reaction figure proto and GITD Oogie Boogie.

Collecting Funko since 2008 :freddy2:

User avatar
Scotty
HOF 2026 + ROTY
HOF 2026 + ROTY
Posts: 3121
Joined: Thu Aug 09, 2012 2:41 pm
Location: Baltimore, MD

Re: Awesome acrylic cases!

Postby Scotty » Tue Mar 18, 2014 1:01 pm

Abe, ours are the same. Mine open from the front. I have a couple of the other ones you mentioned, that open at the top (or bottom--depending) and a wobbler box fits in them perfectly. I was steered towards a company that sold those when I first joined the board, but they were like $15-20 each if I remember correctly. And since I don't display in box, they were also taller than I really needed. So, with Michaels and coupons, you're exactly right, at $5, they are perfect. I even got them for $4 during one sale; I had 50% and 10% coupons--I went to three different Michaels buying up every one they had.

Did you notice they had large ones as well. The fit was a little tight (width-wise), but it worked well enough for these pieces.

2947
Image Image
2013 Rookie of the Year - COTM May 2014 - HOF Class of 2026

User avatar
FunkoNewb
Spirit Award
Spirit Award
Posts: 6018
Joined: Mon Nov 14, 2011 10:03 pm
Location: Sacramento, CA

Re: Awesome acrylic cases!

Postby FunkoNewb » Tue Mar 18, 2014 1:13 pm

Those look awesome in those cases. I think I might need to invest in these for my Iron Man chase pieces and protos when I get them out of storage.
Mike, ISO Freddy Spider-Man wobbler proto and Green GITD Infredible Hulk wobbler.
IG: mikemcc83

User avatar
MyLittleFunkos
HoF 2016 & CotY
HoF 2016 & CotY
Posts: 5210
Joined: Wed Jan 02, 2013 7:33 pm
Location: Chicago, IL

Re: Awesome acrylic cases!

Postby MyLittleFunkos » Tue Mar 18, 2014 1:41 pm

Scotty3333 wrote:Abe, ours are the same. Mine open from the front. I have a couple of the other ones you mentioned, that open at the top (or bottom--depending) and a wobbler box fits in them perfectly. I was steered towards a company that sold those when I first joined the board, but they were like $15-20 each if I remember correctly. And since I don't display in box, they were also taller than I really needed. So, with Michaels and coupons, you're exactly right, at $5, they are perfect. I even got them for $4 during one sale; I had 50% and 10% coupons--I went to three different Michaels buying up every one they had.

Did you notice they had large ones as well. The fit was a little tight (width-wise), but it worked well enough for these pieces.

2947


Aw, those look awesome! I only saw one size and I went ahead and bought all the ones they had. I might try to find a few more this weekend for my future wobbler protos (gotta stay optimistic) that I buy. Hopefully I can find a nice, small case for my bobble cars. I don't like keeping them in the box but they look so plain just sitting on my shelf.

Mike, you should definitely pick some up for your Iron Man pieces, that way you can proudly show off all your chase pieces!
Image
I'm Abe

User avatar
jmd9868
Posts: 501
Joined: Sun Feb 03, 2013 6:43 pm
Location: Upstate, SC

Re: Awesome acrylic cases!

Postby jmd9868 » Sat Mar 22, 2014 5:59 pm

I picked up a couple of these and my Rat Finks fit in them just fine without taking them out of the box. Maybe it is newer ones that don't fit as Craig suggested?
The name is Jean

Image

User avatar
MyLittleFunkos
HoF 2016 & CotY
HoF 2016 & CotY
Posts: 5210
Joined: Wed Jan 02, 2013 7:33 pm
Location: Chicago, IL

Re: Awesome acrylic cases!

Postby MyLittleFunkos » Sun Mar 23, 2014 10:30 am

jmd9868 wrote:I picked up a couple of these and my Rat Finks fit in them just fine without taking them out of the box. Maybe it is newer ones that don't fit as Craig suggested?


That has got to be it. One of my older Freddys fits perfectly in there. Too bad he's not case worthy lol
Image
I'm Abe


Return to “Wacky Wobblers”

Who is online

Users browsing this forum: No registered users